Top Cited Articles
(207 articles with 3968 citations as of July 2024)

• Recent Progress in Preparation of Superhydrophobic Surfaces: A Review, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, 2012
• Sanjay Subhash Latthe, Annaso Basavraj Gurav, Chavan Shridhar Maruti, Rajiv Shrikant Vhatkar
• Citations: 390 (Details)

• FT-IR Spectroscopy Applied for Surface Clays Characterization, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4, 2013
• Paul Djomgoue, Daniel Njopwouo
• Citations: 279 (Details)

• Effect of Processing Paramters on Metal Matrix Composites: Stir Casting Process, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.1, 2012
• G. G. Sozhamannan, S. Balasivanandha Prabu, V. S. K. Venkatagalapathy
• Citations: 240 (Details)

• Metal Nanoparticle Modified Polysulfone Membranes for Use in Wastewater Treatment: A Critical Review, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3A, 2012
• Heidi Lynn Richards, Priscilla G. L. Baker, Emmanuel Iwuoha
• Citations: 152 (Details)

• Effect of Annealing on Structural, Morphological, Electrical and Optical Studies of Nickel Oxide Thin Films, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.2, 2011
• Vikas Patil Patil, Shailesh Pawar, Manik Chougule, Prasad Godse, Ratnakar Sakhare, Shashwati Sen, Pradeep Joshi
• Citations: 142 (Details)

• Influence of Coolant in Machinability of Titanium Alloy (Ti-6Al-4V), Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.1, 2011
• Muthukrishnan Namb, Davim Paulo
• Citations: 100 (Details)

• Application of Algerian Bentonite in the Removal of Cadmium (II) and Chromium (VI) from Aqueous Solutions, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.4, 2014
• Mahfoud Barkat, Salah Chegrouche, Abdelhamid Mellah, Belgacem Bensmain, Djamel Nibou, Makhlouf Boufatit
• Citations: 81 (Details)

• Potentiodynamical Research of Zn-Al-Mg Alloy System in the Neutral Ambience of NaCl Electrolyte and Influence of Mg on the Structure, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, 2012
• Reza Amini, Ziadolla Obidov, Izatulla Ganiev, Mohammad Razazi
• Citations: 75 (Details)

• Cross-Linked Alginate Film Pore Size Determination Using Atomic Force Microscopy and Validation Using Diffusivity Determinations, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4A, 2013
• Cheryl Simpliciano, Larissa Clark, Behrokh Asi, Nathan Chu, Maria Mercado, Steven Diaz, Michel Goedert, Maryam Mobed-Miremadi
• Citations: 72 (Details)

• Adsorption of Congo Red from Aqueous Solution Using CTAB-Kaolin from Bechar Algeria, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.6, 2014
• Mohamed Amine Zenasni, Bahia Meroufel, André Merlin, Béatrice George
• Citations: 65 (Details)

• Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4, 2013
• Osamu Takakuwa, Yusuke Kawaragi, Hitoshi Soyama
• Citations: 61 (Details)

• Effect of Filler Content and Alkalization on Mechanical and Erosion Wear Behavior of CBPD Filled Bamboo Fiber Composites, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3, 2012
• Anu Gupta, Ajit Kumar, Amar Patnaik, Sandhyarani Biswas
• Citations: 55 (Details)

• AZ91 Magnesium Alloys: Anodizing of Using Environmental Friendly Electrolytes, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.2, 2011
• N. A. El Mahallawy, M. A. Shoeib, M. H. Abouelenain
• Citations: 48 (Details)

• Evaluate the Effects of Various Surface Roughness on the Tribological Characteristics under Dry and Lubricated Conditions for Al-Si Alloy, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3, 2012
• Riyadh A. Al-Samarai, Haftirman  , Khairel Rafezi Ahmad, Y. Al-Douri
• Citations: 47 (Details)

• Optimization Conditions for Single-Walled Carbon Nanotubes Dispersion, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1, 2013
• Yunhua Shi, Lingling Ren, Dianqing Li, Huifang Gao, Bing Yang
• Citations: 45 (Details)

• Laser Surface Hardening of Tool Steels—Experimental and Numerical Analysis, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.2, 2013
• Abdel-Monem El-Batahgy, Ramadan Ahmed Ramadan, Abdel-Rahman Moussa
• Citations: 42 (Details)

• Structural, Surface, Thermal and Catalytic Properties of Chitosan Supported Cu(II) Mixed Ligand Complex Materials, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.4, 2012
• R. Antony, S. Theodore David, K. Karuppasamy, K. Saravanan, S. Thanikaikarasan, S. Balakumar
• Citations: 39 (Details)

• Adsorption of CO, CO₂, NO and NO₂ on Boron Nitride Nanotubes: DFT Study, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.3, 2015
• A. A. El-Barbary, Kh. M. Eid, M. A. Kamel, H. O. Taha, G. H. Ismail
• Citations: 39 (Details)

• The Role of Metal-Doped into Magnetite Catalysts for the Photo-Fenton Degradation of Organic Pollutants, Journal of Surface Engineered Materials and Advanced Technology, Vol.8 No.1, 2018
• Xuan Sang Nguyen, Kim Dinh Ngo
• Citations: 39 (Details)

• A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.1, 2015
• Avijit Sinha, Zoheir Farhat
• Citations: 37 (Details)

• The Behaviour of Superalloys in Marine Gas Turbine Engine Conditions, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
• I. Gurrappa, A. K. Gogia, I. V. S. Yashwanth
• Citations: 37 (Details)

• Formation of TiO2 Nanotube Layer by Anodization of Titanium in Ethylene Glycol-H2O Electrolyte, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.3, 2014
• Alain Robin, Michele Bernardes de Almeida Ribeiro, Jorge Luiz Rosa, Roberto Zenhei Nakazato, Messias Borges Silva
• Citations: 36 (Details)

• Investigation of Surface Free Energy for PTFE Polymer by Bipolar Argon Plasma Treatment, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, 2012
• S. M. Pelagade, N. L. Singh, R. S. Rane, S. Mukherjee, U. P. Deshpande, V. Ganesan, T. Shripathi
• Citations: 35 (Details)

• Influence of Abrasive Waterjet Machining Parameters on the Surface Texture Quality of Carrara Marble, Journal of Surface Engineered Materials and Advanced Technology, Vol.7 No.2, 2017
• Mohammad S. Alsoufi, Dhia K. Suker, Mohammed W. Alhazmi, Sufyan Azam
• Citations: 35 (Details)

• Surface Analysis of Carbon Steel Protected from Corrosion by a New Ternary Inhibitor Formulation Containing Phosphonated Glycine, Zn²⁺ and Citrate, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1, 2013
• Boyapati Venkata Appa Rao, Madala Venkateswara Rao, Sirugudu Srinivasa Rao, Bojja Sreedhar
• Citations: 34 (Details)

• Removal of Fe3+ from Aqueous Solution by Natural Apatite, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.1, 2014
• Gongming Qian, Maolin Li, Fei Wang, Xinggang Liu
• Citations: 34 (Details)

• Importance of Surface Preparation for Corrosion Protection of Automobiles, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013
• Narayan Chandra Debnath
• Citations: 34 (Details)

• Effects of Chemical Reaction on the Unsteady Free Convection Flow past an Infinite Vertical Permeable Moving Plate with Variable Temperature, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, 2012
• Fayza Mohammed Nasser El-Fayez
• Citations: 31 (Details)

• Atmospheric Pressure Plasma Treatment and Following Aging Effect of Chromium Surfaces, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.2, 2013
• Vadym Prysiazhnyi
• Citations: 30 (Details)

• Effects of Laser Hardening Process Parameters on Case Depth of 4340 Steel Cylindrical Specimen—A Statistical Analysis, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.3, 2015
• Noureddine Barka, Abderrazak El Ouafi
• Citations: 30 (Details)

• Carbonation Resistance and Anticorrosive Properties of Organic Coatings for Concrete Structures, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013
• Theodosia Zafeiropoulou, Eleni Rakanta, George Batis
• Citations: 28 (Details)

• Glass Marking with CO₂ Laser: Experimental Study of the Interaction Laser - Material, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.1, 2012
• Pascal Deprez, Ciprian-Florin Melian, Florin Breaban, Jean-Francois Coutouly
• Citations: 27 (Details)

• Anodic Behavior of Zn-Al-Be Alloys in NaCl Solution and the Influence of Be on Structure, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, 2012
• Reza Amini, Ziadolla Obidov, Izatulla Ganiev, Mohammad Razazi
• Citations: 27 (Details)

• Surface Modification of Multiferroic BiFeO₃ Ceramic by Argon Sputtering, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.5, 2014
• Paul W. Wang, Matthew Guttag, C.-S. Tu
• Citations: 24 (Details)

• Influence of Deposition Time on the Microstructure and Transport Properties of CdO Thin Films Prepared by Chemical Bath Deposition, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, 2012
• P. Perumal, A. Gowri Manohari, Santiyagu Valanarasu, Adaikalam Kathalingam, Jin-Koo Rhee, Narayanan Soundaram, Rathinam Chandramohan
• Citations: 23 (Details)

• Electrochemical Characterization of Plasma Sprayed Alumina Coatings, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
• Magdi. F. MORKS, Ivan COLE, Penny Corrigan, Akira KOBAYASHI
• Citations: 23 (Details)

• Thin Film Deposition by Langmuir Blodgett Technique for Gas Sensing Applications, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Sanit Malik, Chandra Charu Tripathi
• Citations: 22 (Details)

• Preparation and Characterization of Clay (Maghnite-H)/Poly(3,4-Ethylenedioxythiophene) Composites, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1, 2013
• Affaf Megherbi, Rachid Meghabar, Mohammed Belbachir
• Citations: 21 (Details)

• Hot Corrosion Behavior of Sol-Gel Nano Structured Zirconia Coated 9Cr1Mo Ferritic Steel in Alkali Metal Chlorides and Sulphates Deposit Systems at High Temperatures, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013
• Gazala Ruhi, O. P. Modi, I. B. Singh
• Citations: 21 (Details)

• New Silica Coating Pigment for Inkjet Papers from Mining Industry Sidestreams, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Taina Lamminmäki, Eija Kenttä, Hille Rautkoski, John Bachér, Sebastian Teir, John Kettle, Juha Sarlin
• Citations: 20 (Details)

• Adsorption of Pharmaceuticals and Personal Care Products on Granular Activated Carbon, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.4, 2016
• Nasly Y. Delgado, Alberto L. Capparelli, Damián J. Marino, Agustín F. Navarro, Gustavo A. Peñuela, Alicia E. Ronco
• Citations: 20 (Details)

• Surface Modification of Parts Material Shape Memory TiNiCo with a View to Providing a Functional and Mechanical Property as a Factor in Resource, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.6, 2014
• Peter Olegovich Rusinov, Zhesfina Michailovna Blednova
• Citations: 19 (Details)

• Metal Fluorides Produced Using Chlorine Trifluoride Gas, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.4, 2015
• Hitomi Matsuda, Hitoshi Habuka, Yuuki Ishida, Toshiyuki Ohno
• Citations: 19 (Details)

• Improved Photovoltaic Properties of Heterojunction Carbon Based Solar Cell, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Sudip Adhikari, M. S. Kayastha, D. C. Ghimire, H. R. Aryal, S. Adhikary, T. Takeuchi, K. Murakami, Y. Kawashimo, H. Uchida, K. Wakita, M. Umeno
• Citations: 19 (Details)

• New Polysiloxane Surfaces Modified with ortho-, meta- or para-Nitrophenyl Receptors for Copper Adsorption, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.1, 2014
• Smaail Radi, Nouraddine Basbas, Said Tighadouini, Maryse Bacquet
• Citations: 19 (Details)

• Analytical Solution of Vibration Analysis on Fixed-Free Single-Walled Carbon Nanotube-Based Mass Sensor, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.1, 2012
• Thin-Lin Horng
• Citations: 19 (Details)

• Microstructure, Adhesion and Wear of Plasma Sprayed AlSi-SiC Composite Coatings, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3A, 2012
• Satish Tailor, V. K. Sharma, R. M. Mohanty, P. R. Soni
• Citations: 18 (Details)

• Epitaxial Ge Growth on Si(111) Covered with Ultrathin SiO₂ Films, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Alexander A. Shklyaev, Konstantin N. Romanyuk, Alexander V. Latyshev
• Citations: 18 (Details)

• Fatigue Life Estimation of an Elastomeric Pad by ε-N Curve and FEA, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.2, 2015
• Baban Suryatal, Haribhau Phakatkar, Kasilingam Rajkumar, Ponniah Thavamani
• Citations: 18 (Details)

• Influence of Wettability and Mechanical Properties on Tribological Performance of DLC Coatings under Water Lubrication, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.3, 2015
• Chaoqun Zhang, Masahiro Fujii
• Citations: 17 (Details)

• Sulfate-Reducing Bacteria Impact on Copper Corrosion Behavior in Natural Seawater Environment, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.2, 2016
• Khadija Elmouaden, Shehdeh Jodeh, Aicha Chaouay, Rachid Oukhrib, Rachid Salghi, Lahcen Bazzi, Mustapha Hilali
• Citations: 17 (Details)

• Effect of Tubular Chiralities and Diameters of Single Carbon Nanotubes on Gas Sensing Behavior: A DFT Analysis, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.2, 2014
• A. A. EL-Barbary, Kh. M. Eid, M. A. Kamel, H. M. Osman, G. H. G. H. Ismail
• Citations: 17 (Details)

• Synthesis of PMMA-co-PMAA Copolymer Brush on Multi-Wall Carbon Nanotubes, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3A, 2012
• Petr Slobodian, Petr Svoboda, Pavel Riha, Roman Boruta, Petr Saha
• Citations: 17 (Details)

• Mechanism of Building-Up Deposited Layer during Electro-Spark Deposition, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.4, 2012
• Amin D. Thamer, Mohammed H. Hafiz, Baha S. Mahdi
• Citations: 17 (Details)

• Improvement in Tribological Properties of Surface Layer of an Al Alloy by Friction Stir Processing, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
• Soheyl Soleymani, Amir Abdollah-zadeh, Sima Ahamd Alidokht
• Citations: 17 (Details)

• Microstructure, Corrosion, and Fatigue Properties of Alumina-Titania Nanostructured Coatings, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
• Ahmed Ibrahim, Abdel Salam Hamdy
• Citations: 17 (Details)

• Finite Element Analysis of the Material’s Area Affected during a Micro Thermal Analysis Applied to Homogeneous Materials, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.1, 2011
• Yoann Joliff, Lénaïk Belec, Jean-François Chailan
• Citations: 17 (Details)

• Influence of Carbon Content of WC-Co Electrode Materials on the Wear Resistance of Electrospark Coatings, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, 2012
• Alexander A. Burkov, Sergey A. Pyachin, Alexey V. Zaytsev
• Citations: 16 (Details)

• Effect of Glow-Discharge Air Plasma Treatment on Wettability of Synthetic Polymers, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3, 2012
• Ivo Krásný, Ivana Kupská, Lubomír Lapčík
• Citations: 16 (Details)

• The Role of Preliminary Mechanical Activation in the Process of Obtaining Pow-der-Like Ferrosilicium from Metallurgical Slags, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.2, 2016
• Vilena Hakob Martirosyan, Marine Eduard Sasuntsyan
• Citations: 16 (Details)

• Effect of Heat Treatment Parameters on the Mechanical and Microstructure Properties of Low-Alloy Steel, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.4, 2015
• Mohamed H. Frihat
• Citations: 16 (Details)

• Experimental Adsorption and Modelisation of CO₂ on Adsorbents Collected from Elborma Field in South Tunisia, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.1, 2015
• Souhail Bouzgarrou, Hadi Jedli, Nadra Stiti, Nourdine Hamdi, Khalifa Slimi, Mohamed Bagana
• Citations: 16 (Details)

• Corrosion of Nanocrystalline Ni-W Coated Copper, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.2, 2015
• Christos N. Panagopoulos, Georgios D. Plainakis, Maria G. Tsoutsouva
• Citations: 15 (Details)

• Experimental Study on Solvent Extraction of Quseir Oil Shale in Egypt, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.3, 2015
• Ehssan Nassef, Aya Soliman, Ramadan Abou Al-Alla, Yehia Eltaweel
• Citations: 15 (Details)

• Correlations of Materials Surface Properties with Biological Responses, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.1, 2015
• Robert E. Baier
• Citations: 15 (Details)

• Improvement the Corrosion Resistance for the Galvanized Steel by Adding Sn, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.2, 2016
• Z. Abdel Hamid, S. S. Abd El Rehim, A. Abou Shama, M. Ebrahim
• Citations: 15 (Details)

• Advances in Probing Wood-Coating Interface by Microscopy: A Review, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013
• Adya P. Singh, Byung-Dae Park, Arif Nuryawan, Menda Kazayawoko
• Citations: 15 (Details)

• Dynamic Electropulsing Induced Phase Transformations and Their Effects on Single Point Diamond Turning of AZ91 Alloy, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.1, 2012
• Duo Zhang, S. To, Yaohua Zhu, Hao Wang, Guoyi Tang
• Citations: 15 (Details)

• On Some Applications of Nanoparticles Synthesized in the Gas Phase by Magnetron Discharges, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Virginie Bouchat, N. Moreau, J.-F. Colomer, S. Lucas
• Citations: 15 (Details)

• Effect of Carbonitriding on Endurance Life of Ball Bearing Produced from SAE 52100 Bearing Steels, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Karthikeyan Rajan, Vinod Joshi, Arindam Ghosh
• Citations: 14 (Details)

• Microwave Plasma Enhanced Chemical Vapor Deposition of Carbon Nanotubes, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.4, 2014
• Ivaylo Hinkov, Samir Farhat, Cristian P. Lungu, Alix Gicquel, François Silva, Amine Mesbahi, Ovidiu Brinza, Cornel Porosnicu, Alexandru Anghel
• Citations: 14 (Details)

• Finite Element Analysis of Elastic-Plastic Contact Mechanic Considering the Effect of Contact Geometry and Material Properties, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
• Abodol Rasoul Sohouli, Ali Maozemi Goudarzi, Reza Akbari Alashti
• Citations: 14 (Details)

• Oxidation Behaviour of a Newly Developed Superalloy, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
• I.V.S. Yashwanth, I. Gurrappa, H. Murakami
• Citations: 14 (Details)

• The Effect of Chemical Composition and Thermal Sprayed Method on the Chromium and Tungsten Carbides Coatings Microstructure, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1, 2013
• Maria W. Richert, Borys Mikułowski, Pawel Pałka, Agnieszka Hotloś, Malgorzata Perek-Nowak
• Citations: 14 (Details)

• Study on a Novel Composite Eco-Friendly Corrosion and Scale Inhibitor for Steel Surface in Simulated Cooling Water, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3, 2012
• Defang Zeng, Wen Qin
• Citations: 14 (Details)

• Electrodeposition of Gold to Conformally Fill High-Aspect-Ratio Nanometric Silicon Grating Trenches: A Comparison of Pulsed and Direct Current Protocols, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.4, 2015
• Sami Znati, Nicholas Chedid, Houxun Miao, Lei Chen, Eric E. Bennett, Han Wen
• Citations: 14 (Details)

• Influence of Ageing with UV Radiation on Physicochemical Properties of Acrylic-Polyurethane Coatings, Journal of Surface Engineered Materials and Advanced Technology, Vol.8 No.4, 2018
• Danuta Kotnarowska
• Citations: 14 (Details)

• Vegetable and Mineral Used Oils as Cutting Fluids: Effect on Surface Roughness of Aluminum Alloy, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.4, 2016
• Nabeel Gharaibeh
• Citations: 13 (Details)

• Plasma Treatment for Preparing Durable Water Repellent and Anti-Stain Synthetic Fabrics for Automotive Applications, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.3, 2015
• Nicoletta De Vietro, Luca Belforte, Vito Lambertini, Bartolomeo Placenza, Francesco Fracassi
• Citations: 13 (Details)

• Comparison on Morphological and Optical Properties of TiO₂ Thin Films Grown by Single-Pulse and Multi-Pulse Laser Ablation, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.1, 2015
• Yonic Peñaloza-Mendoza, Luis Ponce-Cabrera
• Citations: 13 (Details)

• In-Situ Monitoring of Chemical Vapor Deposition from Trichlorosilane Gas and Monomethylsilane Gas Using Langasite Crystal Microbalance, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013
• Hitoshi Habuka, Yurie Tanaka
• Citations: 13 (Details)

• Role of Substrate Temperatures on Structural, Optical, Wetting and Electrical Transport Properties of CdS Thin Films, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1, 2013
• P. D. More
• Citations: 13 (Details)

• High Pressure Water-Jet Technology for the Surface Treatment of Al-Si Alloys and Repercussion on Tribological Properties, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
• Md. Aminul Islam, Zoheir Farhat, Jonathon Bonnell
• Citations: 13 (Details)

• Synthesis and Characterization of Polysulfone Hydrogels, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.4, 2014
• Francis N. Muya, Lisebo Phelane, Priscilla G. L. Baker, Emmanuel I. Iwuoha
• Citations: 13 (Details)

• Solid Particle Erosion Behaviour of TiN Coating on AISI 4140 Steel, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.1, 2014
• J. R. Laguna-Camacho, J. E. Escalante-Martínez, R. Cruz-Vicencio, J. V. Méndez-Méndez, I. Arzate-Vázquez, I. Hernández-Romero, M. Vite-Torres
• Citations: 13 (Details)

• Synthesis and Characterization of Some New Cationic Derivatives of Biological Interest, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Moshera Z. Mohamed, Samar A. Abubshait, Eqbal J. Bushlaibi
• Citations: 12 (Details)

• New Methods Testing of Adhesion of the Coating to Sheet Metal by Bending, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, 2012
• Milan Dvořák, Emil Schwarzer
• Citations: 12 (Details)

• Evolution of Morphology of Nano-Scale CuO Grown on Copper Metal Sheets in 5 wt% NaCl Solution of Spray Fog Environment, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.4, 2012
• Hao-Long Chen, Tsung-Hsun Chiang, Ming-Cheng Wu
• Citations: 12 (Details)

• Geochemical Characterization and Mineralogy of Babouri-Figuil Oil Shale, North-Cameroon, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.6, 2014
• Alexis Jacob Nyangono Abolo, Simon Ngos III, Augustin Desire Balla Ondoa, Bruno Garcia, Maria Fernanda-Sarmiento, Olive Cecile Mbesse, Guy Martin Abolo, Daniel Mackaire Eloung Nna, Augustin Ephraim Nkengfack, Emmanuel Ndjeng, Jialin Qian
• Citations: 12 (Details)

• Adsorption of CO, CO₂, NO and NO₂ on Carbon Boron Nitride Hetero Junction: DFT Study, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.4, 2015
• A. A. El-Barbary, Kh. M. Eid, M. A. Kamel, H. O. Taha, G. H. Ismail
• Citations: 12 (Details)

• Anisotropic Structure of Glass Wool Determined by Air Permeability and Thermal Conductivity Measurements, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.2, 2016
• Laurent Marmoret, Hussein Humaish, Anne Perwuelz, Hassen Béji
• Citations: 11 (Details)

• Determination of Coke, Pitch and Pores/Cracks in Green Anode by Image Analysis, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3A, 2013
• Dipankar Bhattacharyay, Duygu Kocaefe, Yasar Kocaefe, Brigitte Morais
• Citations: 11 (Details)

• Adsorption of α-Chymotrypsin on Plant Biomass Charcoal, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4, 2013
• Hidetaka Noritomi, Keito Hishinuma, Shunichi Kurihara, Jumpei Nishigami, Tetsuya Takemoto, Nobuyuki Endo, Satoru Kato
• Citations: 11 (Details)

• Efficient Protein Refolding Using Surfactants at High Final Protein Concentration, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.1, 2014
• Hidetaka Noritomi, Yoshiyuki Kato, Satoru Kato
• Citations: 11 (Details)

• Effect of Monovacancy Defects on Adsorbing of CO, CO₂, NO and NO₂ on Carbon Nanotubes: First Principle Calculations, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4, 2013
• Ahlam A. EL-Barbary, Gehan H. Ismail, Afaf M. Babeer
• Citations: 11 (Details)

• Experimental Investigation of the Effect of Working Parameters on Wire Offset in Wire Electrical Discharge Machining of Hadfield Manganese Steel, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4, 2013
• Ashok Kumar Srivastava, Surjya Kanta Pal, Probir Saha, Karabi Das
• Citations: 10 (Details)

• Effect of Carbon Content on Ti Inclusion Precipitated in Tire Cord Steel, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4, 2013
• Yuedong Jiang, Jialiu Lei, Jing Zhang, Rui Xiong, Feng Zou, Zhengliang Xue
• Citations: 10 (Details)

• Thermal Behavior and UV Properties of Organomodified Kaolin Oleochemically Derived from Rubber Seed Oils (Hevea brasiliensis) and Tea Seed Oils (Camellia sinensis), Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Chinedum Ogonna Mgbemena, Naboth O. Ibekwe, Abdul Azeez Peer Mohamed, Rugmini Sukumar, Aryiappallil Ramankuttymenon Ravindranatha Menon
• Citations: 10 (Details)

• Effect of Self-Assembled Monolayers on the Performance of Organic Photovoltaic Cells, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.2, 2011
• Hanène Bedis
• Citations: 10 (Details)

• H₂ and CH₄ Sorption on Cu-BTC Metal Organic Frameworks at Pressures up to 15 MPa and Temperatures between 273 and 318 K, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.2, 2011
• Yves Gensterblum
• Citations: 10 (Details)

• The Optical Parameters of Zn_xCd_(1-x)Te Chalcogenide Thin Films, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.2, 2011
• Umeshkumar P. Khairnar, Sulakshana S. Behere, Panjabrao H. Pawar
• Citations: 10 (Details)

• Development of the Biopolymeric Optical Planar Waveguide with Nanopattern, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.2, 2011
• Seung H. Yoon, Won T. Jeong, Kyung C. Kim, Kyung J. Kim, Min C. Oh, Sang M. Lee
• Citations: 9 (Details)

• Formation Process and Properties of Phytic Acid Conversion Coatings on Magnesium, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.1, 2011
• Jian-Rui Liu, Yi-Na Guo, Wei-Dong Huang
• Citations: 9 (Details)

• Influence of Substrate Bias Voltage on the Properties of Sputtered Aluminum-Scandium Thin Sheets, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, 2012
• Julien Kovac, Heinz-Rolf Stock, Hans-Werner Zoch
• Citations: 9 (Details)

• E-Beam Graft Polymerization of Hydrophilic PEG-Methacrylate on the Surface of PMMA, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.4, 2012
• Seong-Cheol Kim, PilHo Huh
• Citations: 9 (Details)

• Development of Antioxidants Synthesized by Phase Transfer Catalysts for Lubricating Oil, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.1, 2014
• Noura El Mehbad
• Citations: 9 (Details)

• Evaluation and Analysis of Oil Shale in Quseir-Safaga and Abu-Tartur Western Desert, Egypt, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.2, 2014
• El-Abbas Moustafa, Ahmed Noah, Adel Salem, Ahmed Nehad, Maureen Amir, Mohamed Nosr, Radwa Awad, Mahmoud Gomaa, Marawan Moussa
• Citations: 9 (Details)

• Preparation of Water Based Polymeric Binders for Paper Surface Coating, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.3, 2014
• Samya El-Sherbiny, Fatma A. Morsy, Ayman M. Atta, Salwa A. Ahmed
• Citations: 9 (Details)

• Modification of Steel Surface Using the Laser Energy Olga Chudina, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.4, 2014
• Olga Chudina
• Citations: 9 (Details)

• Influence of Paint on Steel Corrosion for Marine Applications, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.4, 2014
• Abdou Abdel-Samad, Yaser Soud, M. Zaki
• Citations: 9 (Details)

• Development of Coatings Marine Antifouling Based on Perfluorinated Surfactants Synthesis and Physicochemical Study, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.2, 2014
• Abdelkader Bacha, Rachid Méghabar
• Citations: 8 (Details)

• Dynamic Impact Absorption Behaviour of Glass Coated with Carbon Nanotubes, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4, 2013
• Prashant Jindal, Meenakshi Goyal, Navin Kumar
• Citations: 8 (Details)

• Estimate of the Crystallization Kinetics in Stoichiometry Compositions Films of Ge:Sb:Te, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.1, 2012
• Carlos Virgilio Rivera Rodríguez, Eduardo Morales Sanchez, Jesús González Hernández, Evgen Prokhorov, Juan Muñoz Saldaña, Gerardo Trapaga Martínez
• Citations: 8 (Details)

• Nanostructured Microemulsion Phase Behavior Using AOT or Extended Surfactant Combined with a Cationic Hydrotrope, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.1, 2012
• Khalid Kanan, Hala Yousef, Ibrahim Kayali
• Citations: 8 (Details)

• Tribological Characteristics of DLC Coatings in Vacuum under Sliding Contact, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.1, 2012
• M. Ananth Kumar, Masahiro Fujii, Takuya Fukuda
• Citations: 7 (Details)

• Modeling of the Electrical Conductivity of Graphite Dispersions in Electrolytes, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.1, 2012
• Alexander Nikolaevich Lopanov, Evgeniya Aleksandrovna Fanina, Igor Valentinovich Prushkovsky
• Citations: 7 (Details)

• Charge Transfer Properties in MEH-PPV/PS:MWCNTs Nanocomposites, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3, 2012
• Nadia Chehata, Olfa Dhibi, Adnen Ltaief, Ali Farzi, Abdelaziz Bouazizi
• Citations: 7 (Details)

• Joint Operation of Atomic Force Microscope and Advanced Laser Confocal Microscope for Observing Surface Processes in a Protein Crystal, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3A, 2012
• Shin-ichiro Yanagiya, Nobuo Goto
• Citations: 7 (Details)

• Structural Characteristics of Porous Silicon, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.2, 2014
• Qadeer Hussain, Arifullah  , Nazir A. Naz, Ammar Akbar, Akbar Ali
• Citations: 7 (Details)

• Dependence of Atomic-Scale Si(110) Surface Roughness on Hydrogen Introduction Temperature after High-Temperature Ar Annealing, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.5, 2014
• Koji Araki, Ryuji Takeda, Haruo Sudo, Koji Izunome, Xinwei Zhao
• Citations: 7 (Details)

• The Effect of Tightening on the Corrosion Properties of the PVD Layers on Magnesium AZ91D Alloy, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.5, 2014
• Janusz Kaminski, Michał Tacikowski, Agnieszka Brojanowska, Beata Kucharska, Tadeusz Wierzchon
• Citations: 7 (Details)

• Film-Forming Properties of Fullerene Derivatives in Electrospray Deposition Method, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013
• Kazumasa Takeshi, Kenji Takagi, Takeshi Fukuda, Teiji Chihara, Yusuke Tajima
• Citations: 7 (Details)

• AFM Investigation of the Organization of Actin Bundles Formed by Actin-Binding Proteins, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4A, 2013
• Jamie L. Gilmore, Masahiro Kumeta, Kunio Takeyasu
• Citations: 7 (Details)

• Characterization of Pectin Nanocoatings at Polystyrene and Titanium Surfaces, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4A, 2013
• Katarzyna Gurzawska, Kai Dirscherl, Yu Yihua, Inge Byg, Bodil Jørgensen, Rikke Svava, Martin W. Nielsen, Niklas R. Jørgensen, Klaus Gotfredsen
• Citations: 7 (Details)

• Synthesis and Characterization of Air-Stable Elemental Fe Thin Films by Chemical Vapor Deposition of Fe₃(CO)₁₂, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• On Mero, Nava Shpaisman, Judith Grinblat, Shlomo Margel
• Citations: 7 (Details)

• The Surface Reactivity and Electronic Properties of Small Hydrogenation Fullerene Cages, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.3, 2015
• A. A. El-Barbary
• Citations: 7 (Details)

• A Study of Surface Modification of Poly(lactic-co-glycolic) Acid Using Argon Ion Irradiation, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.6, 2014
• Ananta Raj Adhikari, Buddhi Prasanga Tilakaratne, Dharshana Wijesundera, Wei-Kan Chu
• Citations: 7 (Details)

• Surface Roughness Modification of Free Standing Single Crystal Silicon Microstructures Using KrF Excimer Laser Treatment for Mechanical Performance Improvement, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.1, 2015
• Mohamed Elwi Mitwally, Toshiyuki Tsuchiya, Osamu Tabata, Sherif Sedky
• Citations: 7 (Details)

• Dependence of Nanotextured Titanium Orthopedic Surfaces on Electrolyte Condition, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.4, 2016
• Sachin M. Bhosle, Radheshyam Tewari, Craig R. Friedrich
• Citations: 7 (Details)

• A Predictive Modeling Based on Regression and Artificial Neural Network Analysis of Laser Transformation Hardening for Cylindrical Steel Workpieces, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.4, 2016
• Ahmed Ghazi Jerniti, Abderazzak El Ouafi, Noureddine Barka
• Citations: 6 (Details)

• Impact of Corrosive Liquid on Trivalent Chromium over Aluminium Alloys, Journal of Surface Engineered Materials and Advanced Technology, Vol.7 No.3, 2017
• Kalaivanan Thirupathi, Pál Bárczy, Béla Márton Somosvári
• Citations: 6 (Details)

• Effect of Adding Sb on Microstructure, Mechanical Properties and in Vitro Degradation Behavior of as Cast Mg-4wt% Zn Alloy for Medical Application, Journal of Surface Engineered Materials and Advanced Technology, Vol.7 No.4, 2017
• Hadeer I. Mohamed, Mohamed E. Moussa, Mohamed A. Waly, Gamilla S. Al-Ganainy, Aya B. Ahmed, Mona S. Talaat
• Citations: 6 (Details)

• Polyamide Fibers Covered with Chlorhexidine: Thermodynamic Aspects, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.4, 2015
• E. Giménez-Martín, M. López-Andrade, J. A. Moleón-Baca, M. A. López, A. Ontiveros-Ortega
• Citations: 6 (Details)

• High Temperature Sintering and Oxidation Behavior in Plasma Sprayed TBCs [Single Splat Studies] Paper 2—Relevance of Variation in Materials Systems of TBC Components, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013
• Swarnima Deshpande
• Citations: 6 (Details)

• Instantly Investigating the Adsorption of Polymeric Corrosion Inhibitors on Magnesium Alloys by Surface Analysis under Ambient Conditions, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.5, 2014
• Lívia M. Garcia Gonçalves, Larissa C. Sanchez, Stephani Stamboroski, Yendry R. Corrales Urena, Welchy Leite Cavalcanti, Jörg Ihde, Michael Noeske, Marko Soltau, Kai Brune
• Citations: 6 (Details)

• On the Use of Laser Ablation for Cleaning High Voltage Ceramic Insulators, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.5, 2014
• E. de Posada, L. Moreira, M. Arronte, L. Ponce, T. Flores
• Citations: 6 (Details)

• Evaluation of Additives as Corrosion Inhibitors/Antioxidants for High Quality Nano Emulsifiable Oils of Metalworking Fluids, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.3, 2014
• Noura El Mehbad
• Citations: 6 (Details)

• Nanocomposites Based on Conducting Polymers and Functionalized Carbon Nanotubes with Different Dopants Obtained by Electropolymerization, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.3, 2014
• Florina Branzoi, Viorel Branzoi
• Citations: 6 (Details)

• Laser Surface Annealing of Plasma Sprayed Coatings, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3A, 2012
• Ahmed Ibrahim, Yue Hung
• Citations: 6 (Details)

• Preparation of Perfluorinated Surfactant Activates for Antifouling Paints, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.4, 2012
• A. Bacha, R. Méghabar
• Citations: 6 (Details)

• Numerical-Experimental Updating Identification of Elastic Behavior of a Composite Plate Using New Multi-Objective Optimization Procedure, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1, 2013
• Samir Ghanmi, Sofiane Bouajila, Mohamed Guedri
• Citations: 6 (Details)

• Microstructure and Properties of Fe-Based Coating on Column Surface Formed by High Frequency Induction Cladding, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.1, 2012
• Huilong Yang, Yufu Sun, Jingjie Shen, Sumeng Hu, Qing Zhao, Xiangcai Jia, Jingchao Zhang
• Citations: 6 (Details)

• Modeling of Adsorption of Bi(III) from Nitrate Medium by Impregnated Resin D2EHPA/XAD-1180, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.2, 2011
• Nasr-Eddine Belkhouche, Nacera Benyahia
• Citations: 5 (Details)

• Effect of Nitriding on Wear Behavior of Graphite Reinforced Aluminum Alloy Composites, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.2, 2011
• Bhujang Mutt Girish, Bhujang Mutt Satish, Hanyalu Ramegowda Vitala
• Citations: 5 (Details)

• Elucidation and Identification of Double-Tip Effects in Atomic Force Microscopy Studies of Biological Structures, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3A, 2012
• Yong Chen
• Citations: 5 (Details)

• Plastic Waste Management by Substituting Natural Fibres, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.4, 2012
• Surabhi Srivastava
• Citations: 5 (Details)

• Improved Corrosion Resisting Property of Magnetism Iron Fiber by SiO₂ Coating, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3, 2012
• Dongying Niu, Jinku Yu, Qi Qiao, Dongdong Wang, Runhai Liu
• Citations: 5 (Details)

• The Impact of Microscopic Fungi on the Morphological and Structural Properties of Carbon Steel, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.4, 2014
• Elena Binkauskiene, Albinas Lugauskas, Igoris Prosyčevas, Vidas Pakštas, Aušra Selskiene, Dalia Bučinskiene, Alma Ručinskiene
• Citations: 5 (Details)

• The Metal/Electroactive Polymer Interface Studied by Surface Resistance, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Ricardo Tucceri
• Citations: 5 (Details)

• Erosion Behavior of AISI 6061-T6, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.3, 2015
• Juan Rodrigo Laguna-Camacho, Hermilo Martínez-García, Frumencio Escamilla-Rodríguez, Carlos Alarcón-Rosas, Celia María Calderón-Ramón, Lizeth Ríos-Velasco, Lizeth Ríos-Velasco, Matilde Pelcastre-Lozano, Álvaro Casados-Sánchez, Melesio González-Gómez
• Citations: 5 (Details)

• Photocatalytic Activity of Titanium Dioxide Powder Fabricated from an Anodized Titanium Sheet under Ultra-Violet and Visible Light Irradiation, Journal of Surface Engineered Materials and Advanced Technology, Vol.7 No.1, 2017
• Michio Kaneko, Kiyonori Tokuno, Kazuo Yamagishi, Takao Wada, Tsuyoshi Hasegawa
• Citations: 5 (Details)

• Evaluation of Contact Pressure in Bending under Tension Test by a Pressure Sensitive Film, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.4, 2016
• Luis Fernando Folle, Lirio Schaeffer
• Citations: 4 (Details)

• Effects of Electropulsing Induced Microstructural Changes on THz-Reflection and Electrical Conductivity of Al-Doped ZnO Thin-Films, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.3, 2016
• Yaohua Zhu, Weien Lai
• Citations: 4 (Details)

• Research on the Solid Solution Behavior of Titanium Inclusion for the High Strength Tire Cord Steel, Journal of Surface Engineered Materials and Advanced Technology, Vol.8 No.3, 2018
• Jialiu Lei, Dongnan Zhao, Yuedong Jiang
• Citations: 4 (Details)

• Erosion and Toughening Mechanisms of Electroless Ni-P-Nano-NiTi Composite Coatings on API X100 Steel under Single Particle Impact, Journal of Surface Engineered Materials and Advanced Technology, Vol.9 No.4, 2019
• Marissa MacLean, Zoheir Farhat, George Jarjoura, Eman Fayyad, Aboubakr Abdullah, Mohammad Hassan
• Citations: 4 (Details)

• Preparation, Characterization and Catalytic Activity of Alkyl Benzene Sulfonic Acid Carbon-Based Acid Catalyst, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.2, 2015
• Huoxin Luan, Yunqiang Wu, Wenxiang Wu, Quansheng Chen, Hailing Zhang, Kang Liu, Guangmiao Qu, Wei Ding
• Citations: 4 (Details)

• Photocatalytic Activity of Anodized Titanium Sheets under Ultra-Violet and Visible Light Irradiation, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.6, 2014
• Michio Kaneko, Kiyonori Tokuno, Kazuo Yamagishi, Takao Wada, Tsuyoshi Hasegawa
• Citations: 4 (Details)

• Mass Synthesis in Polyol of Tailored Zinc Oxide Nanoparticles for Photovoltaic Applications, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.1, 2016
• Mongia Hosni, Ivaylo Hinkov, Christian Ricolleau, Thierry Pauporté, Samir Farhat, Noureddine Jouini
• Citations: 4 (Details)

• Investigating the Structurization Process of Iron Monosilicide Powders Obtained by High-Temperature Synthesis from the Preliminarily Mechanoactivated Burden, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.2, 2016
• Vilena Hakob Martirosyan, Marine Eduard Sasuntsyan
• Citations: 4 (Details)

• Surface Characterisation of a Ferroelectric Single Crystal by Kelvin Probe Force Microscopy, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Kenny Lau, Yun Liu, Qian Li, Zhenrong Li, Ray L. Withers, Zhuo Xu
• Citations: 4 (Details)

• Reduced Activation Energy of Iron and Copper Ion Doped Mullite which Can Be Used as a Substrate in Electronic Industry, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3A, 2013
• Debasis Roy, Kumaresh Haldar, Biplab Kumar Paul, Alakananda Bhattacharya, Sukhen Das, Papiya Nandy
• Citations: 4 (Details)

• The Uniformal Metallization of the AlSiC Metal Matrix Composite Material Surface, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.4, 2014
• Nikolai Vladimirovich Sevostyanov, Konstantin Nikolaevich Nishchev, Mikhail Il’ich Novopoltsev
• Citations: 4 (Details)

• Adding Sn on the Performance of Amorphous Brazing Fillers Applied to Brazing TA2 and Q235, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.6, 2014
• Jie Cui, Qiuya Zhai, Jinfeng Xu, Yahui Wang, Jianlin Ye
• Citations: 4 (Details)

• Development of Alkylation Toluene with Methanol for Fuel on Modified ZSM-5 Zeolites by Amphoteric Surfactant, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.1, 2014
• Akila El Morsi, A. M. A. Omar, Nora Y. Almehbad
• Citations: 4 (Details)

• Transverse Vibration Analysis of Single-Walled Carbon Nanotubes Embedded in an Elastic Medium Using Bernoulli-Fourier Method, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3A, 2012
• Thin-Lin Horng
• Citations: 4 (Details)

• Effect of Conduction Pre-heating in Au-Al Thermosonic Wire Bonding, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
• Gurbinder Singh, Othman Mamat
• Citations: 4 (Details)

• Development of Anti-Wear/Antioxidant Additives for High Quality Metalworking Fluid from Waste Petroleum Products, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.1, 2014
• Noura Al Mehbad, A. M. A. Omar
• Citations: 3 (Details)

• Assessment of the Erosive Wear Kinetics of Epoxy Coatings Modified with Nanofillers, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013
• Danuta Kotnarowska, Michał Przerwa
• Citations: 3 (Details)

• Parameter Optimization of Amalgamated Al₂O₃-40% TiO₂ Atmospheric Plasma Spray Coating on SS304 Substrate Using TLBO Algorithm, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.3, 2016
• Thankam Sreekumar Rajesh, Ravipudi Venkata Rao
• Citations: 3 (Details)

• Influence of Surface Properties Modified with Fine Shot Peening on Scuffing, Journal of Surface Engineered Materials and Advanced Technology, Vol.8 No.3, 2018
• Yuya Omiya, Masahiro Fujii, Ryo Ochiai, Koshi Ishimoto, Akihiro Ueda
• Citations: 3 (Details)

• Enhancement of Corrosion Resistance of NiCrFeBSi Coatings Obtained by Flame Thermal Spray Process Adding an Electroless Nickel Coating Ni-P, Journal of Surface Engineered Materials and Advanced Technology, Vol.7 No.4, 2017
• Arturo Barba-Pingarrón, Raúl Valdez-Navarro, Félix Sánchez-De Jesus, Ana María Bolarín-Miró, Rafael González-Parra, Alba Covelo-Villar, Miguel Ángel Hernández-Gallegos, Carlos Domínguez-Ríos
• Citations: 3 (Details)

• Pin-on-Disc Study of Tribological Performance of PVD Coatings, Journal of Surface Engineered Materials and Advanced Technology, Vol.8 No.1, 2018
• Mária Hagarová, Dagmar Jakubéczyová, Martin Fides, Marek Vojtko, Jarmila Savková
• Citations: 3 (Details)

• Synthesis and Characterization of Organic Bio-Absorbents Coming from Sugarcane Bagasse, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.3, 2016
• Israel Hernández Romero, Juan Rodrigo Laguna Camacho, Raúl Enrique Contreras Bermúdez, Francisca Sandoval Reyes, Erika Gaona Santiago, Celia María Calderón Ramón, Lizeth Ríos Velasco, Jesús Enrique Escalante Martínez
• Citations: 2 (Details)

• Elaboration and Magnetic Properties of Cobalt-Palladium Magnetic Nanowires Encapsulated in Carbon Nanotubes, Journal of Surface Engineered Materials and Advanced Technology, Vol.7 No.1, 2017
• Olivier Rousseau, Cynthia Locard, Aïchata Kane, Yves Roussigné, Samir Farhat, Salim Mourad Chérif
• Citations: 2 (Details)

• Profile Characterization and Temperature Effect on the Wettability of Microstructured Surfaces, Journal of Surface Engineered Materials and Advanced Technology, Vol.8 No.4, 2018
• Yuxuan Han, Yingwei Liu, Minami Kaneko, Fumio Uchikoba
• Citations: 2 (Details)

• Characterization of Microstructure Coatings Used in Industry, Journal of Surface Engineered Materials and Advanced Technology, Vol.9 No.2, 2019
• Maria Richert, Ilona Nejman, Paulina Zawadzka
• Citations: 2 (Details)

• Fabrication of Aluminum/Single-Walled Carbon Nanotube Oxidation Films through CNT-Added Surface Treatment, Journal of Surface Engineered Materials and Advanced Technology, Vol.12 No.1, 2022
• Sangjae Kim, Emi Matsuyama, Hideharu Tajima, Rikuma Miyake, Takahiro Maruyama
• Citations: 2 (Details)

• Musa Paradaisica and Vitis vinifera Functionalised Ag-NPs: Electrochemical and Optical Detection of Escherichia coli in Seawater, Journal of Surface Engineered Materials and Advanced Technology, Vol.12 No.3, 2022
• Sphamandla Nqunqa, Takalani Mulaudzi, Njagi Njomo, Usisipho Feleni, Rachel F. Ajayi
• Citations: 2 (Details)

• Modeling the Adsorption Kinetics of Activated Carbon for Oil Vapor Recovery and Applications, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.2, 2016
• Qi Wang, Zhipeng Wang, Zhun Zhao
• Citations: 2 (Details)

• Cracking of S235JR Cold-Deformed Steel during Galvanizing—Developing a Test to Evaluate and Predict the Effect of the Zinc Alloy Composition, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013
• Anne-Lise Cristol, David Balloy, Christophe Niclaeys, Philippe Quaegebeur, Ludovic Néel
• Citations: 2 (Details)

• High Temperature Sintering and Oxidation Behavior in Plasma Sprayed TBCs [Single Splat Studies] Paper 1—Role of Heat Treatment Variations, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013
• Swarnima Deshpande
• Citations: 2 (Details)

• Surface Characterization of As-Spun and Supercontracted Nephila clavipes Dragline Silk, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3A, 2013
• Benoit Faugas, Michael S. Ellison, Delphine Dean, Marian S. Kennedy
• Citations: 2 (Details)

• ATR-FTIR and XPS Evaluation of Alkyl Immobilization by Hydrosilylation on n-Si(111) for Photoelectrochemical Cell Electrode, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3A, 2013
• Toshihito Ohtake
• Citations: 2 (Details)

• Effect of Pulsed Laser on the Structure and Morphology of Alumina-Zirconia Coatings, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.3, 2013
• Hala Omar, Ahmed Ibrahim, Hanadi Salem, Sherif Sedky
• Citations: 2 (Details)

• Diamond Particles Deposited among Nickel/Copper Particles in Energy Controlled CH₄/H₂ RF Discharge Plasmas, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3, 2012
• Junichi Emi, Satoru Iizuka
• Citations: 2 (Details)

• A First Principles Simulation Framework for the Interactions between a Si(001) Surface and a Scanning Probe, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3A, 2012
• Dung Q. Ly, Charalampos Makatsoris
• Citations: 1 (Details)

• Lithography and Fabrication of Frictional Tiers on Poly(Dimethylsiloxane) Using Atomic Force Microscopy, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.3A, 2012
• Gregory S. Watson, Jolanta A. Watson
• Citations: 1 (Details)

• Surface and Bulk Defects in Cr-Mn Iron Alloy Cast in Metal and Sand Moulds: Characterization by Positron Annihilation Techniques, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
• Parthasarathy Sampathkumaran, Subramanyam Seetharamu, Chikkakuntappa Ranganathaiah, Jaya Madhu Raj, Pradeep Kumar Pujari, Priya Maheshwari, Debashish Dutta, S. Kishore
• Citations: 1 (Details)

• Interfacial Actions and Adherence of an Interpenetrating Polymer Network Thin Film on Aluminum Substrate, Journal of Surface Engineered Materials and Advanced Technology, Vol.1 No.3, 2011
• Weiwei Cui, Dongyan Tang, Jie Liu, Fan Yang
• Citations: 1 (Details)

• A Fast Algorithm for Automated Quality Control in Surface Engineering, Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, 2012
• Ehsan Sheybani, Singli Garcia-Otero, Fedra Adnani, Giti Javidi
• Citations: 1 (Details)

• The Use of Light Diffracted from Grating Etched onto the Backside Surface of an Atomic Force Microscope Cantilever Increases the Force Sensitivity, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.4A, 2013
• Sergey K. Sekatskii, Mounir Mensi, Andrey G. Mikhaylov, Giovanni Dietler
• Citations: 1 (Details)

• New Trends in Non-Destructive Evaluation of Surface Hardened Layers and Coatings, Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.2, 2013
• Valery Vengrinovich
• Citations: 1 (Details)

• In Situ ATR-FTIR Observation about Surfactant/Hydrogen-TerminatedSi(111) Interface in Solution, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.2, 2014
• Toshihito Ohtake
• Citations: 1 (Details)

• Transfer of Machined Patterns on an Aluminum Plate to Pyrex Glass Using Reactive Ion Etching SF₆ Plasma without Masks, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.5, 2014
• Carlos M. Ortiz-Lima, Fernando J. Quiñones-Novelo, Alberto Jaramillo-Núñez, Jorge Castro-Ramos
• Citations: 1 (Details)

• The Investigation of Replacing Ceramic Bushings with Silicon Bushings in the Distribution Transformers, Journal of Surface Engineered Materials and Advanced Technology, Vol.4 No.6, 2014
• Maryam Amirbandeh, Abdol Amir Yaghoti, Gholam-Reza Sharifi-Tameh
• Citations: 1 (Details)

• New Polysiloxane Surfaces Modified with Ortho-, Meta-, or Para-Nitrophenyl Moieties for Cadmium Removal from Water, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.2, 2016
• Shehdeh Jodeh, Bayan Khalaf, Smaail Radi, Said Tighadouini, Rachid Salghi, Sobhi Samhan, Ismail Warad, Diana Jodeh
• Citations: 1 (Details)

• The Inhibition Effect of Cinnamon Extract on Leaching of Aluminum Cook Wares in NaCl Solutions at Quasi-Cooking Condition, Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.4, 2015
• Layla A. Al Juhaiman, Raesah A. Al-Shihry, Hassan M. Al Hazmei
• Citations: 1 (Details)

• Influence of Equal Channel Angular Pressing on Tribological Properties of Low Carbon Steel (Fe-0,09C-0,64Si-,26Mn), Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.1, 2015
• P. G. Mordovskoi, S. P. Yakovleva, S. N. Maharova
• Citations: 1 (Details)

• Erratum to “Multilevel B-Spline Repulsive Energy in Nanomodeling of Graphenes” [Journal of Surface Engineered Materials and Advanced Technology Vol. 4 No. 2 (April 2014) 75-86], Journal of Surface Engineered Materials and Advanced Technology, Vol.5 No.2, 2015
• Maharavo Randrianarivony
• Citations: 1 (Details)

• Analytical Study of Precision Optical Glass Surface and Its Effect on Some Polarimetric Parameters, Journal of Surface Engineered Materials and Advanced Technology, Vol.12 No.1, 2022
• Naglaa Aboe-Ella Mahmoud
• Citations: 1 (Details)

• Influence of Laser-Induced Bubble Formation on Laser Chemical Machining, Journal of Surface Engineered Materials and Advanced Technology, Vol.10 No.2, 2020
• Marcel Simons, Tim Radel, Raj Shanta Kajsaravally, Frank Vollertsen
• Citations: 1 (Details)

• Physical Alloying of Plasma Metallization Carbide Nanocomposite Coating by Allotropic Carbon Nanostructures, Journal of Surface Engineered Materials and Advanced Technology, Vol.11 No.1, 2021
• Philipp I. Vysikaylo, Valeriy S. Mitin, Alexey A. Yakushkin
• Citations: 1 (Details)

• Investigation of Physico-Chemical Characteristics of Stainless Steel Surface and Their Effect on the Appearance Aspects of the Alloy Surface, Journal of Surface Engineered Materials and Advanced Technology, Vol.9 No.4, 2019
• Shilpa Vaidya, N. C. Debnath
• Citations: 1 (Details)

• Polarizabilities and Orientational Order Parameter in N-(p-n-Ethoxybenzylidene)- p-n-Alkoxy Anilines, 2O.Om LC Compounds, Journal of Surface Engineered Materials and Advanced Technology, Vol.6 No.3, 2016
• Putcha Srinivasa Sastry, Chintalapati Srinivas, Pokkunuri Pardhasaradhi, Venkata Gopala Krishna Murthy Pisipati
• Citations: 1 (Details)

• Mechanistic Study of Ruthenium(III) Catalyzed Oxidation of Cyclohexanone by Acidic Bromate, Journal of Surface Engineered Materials and Advanced Technology, Vol.8 No.2, 2018
• Yasir Arafat Lone, Masood Ayoub Kaloo, Faizan Danish Khaleel
• Citations: 1 (Details)

• Simulation of Hydrophobicity Evaluation and Structural Optimization Design Method for Micro-Array Units, Journal of Surface Engineered Materials and Advanced Technology, Vol.8 No.2, 2018
• Yang Shen, Ge Guo, Yafeng Zhang, Yuan Lu, Xin Wang
• Citations: 1 (Details)

• Influence of Fine Zirconia Particle Shot Peening on Sliding Wear of Zirconia-Silicon Carbide Composites, Journal of Surface Engineered Materials and Advanced Technology, Vol.7 No.2, 2017
• Hitonobu Koike, Koji Takahashi
• Citations: 1 (Details)