Top Cited Articles
(136 articles with 2016 citations as of July 2024)

• Parallel Manipulators Applications—A Survey, Modern Mechanical Engineering, Vol.2 No.3, 2012
• Y. D. Patel, P. M. George
• Citations: 318 (Details)

• Design and Development of a Competitive Low-Cost Robot Arm with Four Degrees of Freedom, Modern Mechanical Engineering, Vol.1 No.2, 2011
• Ashraf Elfasakhany, Eduardo Yanez, Karen Baylon, Ricardo Salgado
• Citations: 134 (Details)

• Axial Tensile Testing of Single Fibres, Modern Mechanical Engineering, Vol.2 No.4, 2012
• Prasanna Kumar Ilankeeran, Preetamkumar M. Mohite, Sudhir Kamle
• Citations: 98 (Details)

• Stress Analysis of Thin-Walled Pressure Vessels, Modern Mechanical Engineering, Vol.5 No.1, 2015
• Ahmed Ibrahim, Yeong Ryu, Mir Saidpour
• Citations: 91 (Details)

• A Survey of Modeling and Control of Piezoelectric Actuators, Modern Mechanical Engineering, Vol.3 No.1, 2013
• Jingyang Peng, Xiongbiao Chen
• Citations: 88 (Details)

• Numerical Study on Application of CuO-Water Nanofluid in Automotive Diesel Engine Radiator, Modern Mechanical Engineering, Vol.2 No.4, 2012
• Navid Bozorgan, Komalangan Krishnakumar, Nariman Bozorgan
• Citations: 74 (Details)

• Bio-Diesel from Mustard Oil: A Renewable Alternative Fuel for Small Diesel Engines, Modern Mechanical Engineering, Vol.1 No.2, 2011
• Zannatul Moiet Hasib, Jomir Hossain, Saikat Biswas, Asif Islam
• Citations: 70 (Details)

• Application and Analysis of Force Control Strategies to Deburring and Grinding, Modern Mechanical Engineering, Vol.3 No.2A, 2013
• Frank Domroes, Carsten Krewet, Bernd Kuhlenkoetter
• Citations: 46 (Details)

• Investigation of a Pressure Sensor with Temperature Compensation Using Two Concentric Wheatstone-Bridge Circuits, Modern Mechanical Engineering, Vol.3 No.2, 2013
• Chi-Chang Hsieh, Chih-Ching Hung, Yan-Huei Li
• Citations: 35 (Details)

• Design Optimization of Cam & Follower Mechanism of an Internal Combustion Engine for Improving the Engine Efficiency, Modern Mechanical Engineering, Vol.2 No.3, 2012
• Mahesh R. Mali, Prabhakar D. Maskar, Shravan H. Gawande, Jay S. Bagi
• Citations: 34 (Details)

• Measurement of Effective Reading Distance of UHF RFID Passive Tags, Modern Mechanical Engineering, Vol.3 No.3, 2013
• Yuan-Ping Luh, Yin-Chang Liu
• Citations: 30 (Details)

• Design and Development of Shell & Tube Heat Exchanger for Beverage, Modern Mechanical Engineering, Vol.2 No.4, 2012
• Shravan H. Gawande, Sunil D. Wankhede, Rahul N. Yerrawar, Vaishali J. Sonawane, Umesh B. Ubarhande
• Citations: 29 (Details)

• Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method, Modern Mechanical Engineering, Vol.6 No.2, 2016
• Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi
• Citations: 29 (Details)

• Tribological Properties and Machining Performance of Vegetable Oil Based Metal Working Fluids—A Review, Modern Mechanical Engineering, Vol.8 No.1, 2018
• Tamalapura Puttaswamy Jeevan, Saligrama Ramachandra Jayaram
• Citations: 28 (Details)

• Design Optimization of Shell and Tube Heat Exchanger by Vibration Analysis, Modern Mechanical Engineering, Vol.1 No.1, 2011
• S. H. Gawande, A. A Keste, L. G Navale, M. R Nandgaonkar, V. J Sonawane, U. B Ubarhande
• Citations: 26 (Details)

• Prediction of Effective Elastic Modulus of Biphasic Composite Materials, Modern Mechanical Engineering, Vol.2 No.1, 2012
• Anupama Upadhyay, Ramvir Singh
• Citations: 26 (Details)

• The Effect of Tool Construction and Cutting Parameters on Surface Roughness and Vibration in Turning of AISI 1045 Steel Using Taguchi Method, Modern Mechanical Engineering, Vol.4 No.1, 2014
• Rogov Vladimir Aleksandrovich, Ghorbani Siamak
• Citations: 26 (Details)

• Analysis of Stresses and Deflection of Sun Gear by Theoretical and ANSYS Method, Modern Mechanical Engineering, Vol.1 No.2, 2011
• Yogesh C. Hamand, Vilas Kalamkar
• Citations: 25 (Details)

• Assessment of Wind Energy Potential as a Power Generation Source in the Azraq South, Northeast Badia, Jordan, Modern Mechanical Engineering, Vol.5 No.3, 2015
• Omar Al-Nhoud, Mohammad Al-Smairan
• Citations: 25 (Details)

• Optimization of Welding Parameters for Friction Stir Lap Welding of AA6061-T6 Alloy, Modern Mechanical Engineering, Vol.8 No.1, 2018
• Rathinasuriyan Chandran, Sankar Ramaiyan, Avin Ganapathi Shanbhag, Senthil Kumar Velukkudi Santhanam
• Citations: 25 (Details)

• Study on MHD Viscous Flow over a Stretching Sheet Using DTM-Pade’ Technique, Modern Mechanical Engineering, Vol.2 No.4, 2012
• Mohammadreza Azimi, Davood Domiri Ganji, Farhad Abbassi
• Citations: 20 (Details)

• Understanding of Ultrasonic Assisted Machining with Diamond Grinding Tool, Modern Mechanical Engineering, Vol.4 No.1, 2014
• Kyung-Hee Park, Yun-Hyuck Hong, Kyeong-Tae Kim, Seok-Woo Lee, Hon-Zong Choi, Young-Jae Choi
• Citations: 19 (Details)

• Developing an Intelligent Fault Diagnosis of MF285 Tractor Gearbox Using Genetic Algorithm and Vibration Signals, Modern Mechanical Engineering, Vol.3 No.4, 2013
• Ebrahim Ebrahimi, Payam Javadikia, Nasrolah Astan, Majid Heydari, Mojtaba Bavandpour, Mohammad Hadi Jalili, Ali Zarei
• Citations: 18 (Details)

• A Theoretical Investigation of Efficiency Enhancement in Thermal Power Plants, Modern Mechanical Engineering, Vol.2 No.3, 2012
• Venkata Seshendra Kumar Karri
• Citations: 18 (Details)

• Effect of Cooling Conditions on Mechanical and Microstructural Behaviours of Friction Stir Processed AZ31B Mg Alloy, Modern Mechanical Engineering, Vol.7 No.4, 2017
• Sankar Ramaiyan, Rathinasuriyan Chandran, Senthil Kumar Velukkudi Santhanam
• Citations: 17 (Details)

• Improvement of a Joystick Controller for Electric Wheelchair User, Modern Mechanical Engineering, Vol.5 No.4, 2015
• Masatomo Shibata, Chao Zhang, Takakazu Ishimatsu, Motohiro Tanaka, Joel Palomino
• Citations: 16 (Details)

• Tool Temperature and Process Modeling of Friction Stir Welding, Modern Mechanical Engineering, Vol.8 No.1, 2018
• Takashi Nakamura, Toshiyuki Obikawa, Eitaro Yukutake, Satoru Ueda, Itaru Nishizaki
• Citations: 16 (Details)

• Application and Development of 3D Printing in Medical Field, Modern Mechanical Engineering, Vol.10 No.3, 2020
• Sun Chunhua, Shang Guangqing
• Citations: 16 (Details)

• Study on Interface Friction Model for Engineering Materials Testing on Split Hopkinson Pressure Bar Tests, Modern Mechanical Engineering, Vol.3 No.1, 2013
• Yubin Lu, Songyan Zhang
• Citations: 16 (Details)

• Comparative Study of the Impact of Corundum Particle Contaminants Size on Wear and Fatigue Life of Grease Lubricated Ball Bearings, Modern Mechanical Engineering, Vol.3 No.4, 2013
• D. Koulocheris, A. Stathis, Th. Costopoulos, G. Gyparakis
• Citations: 16 (Details)

• Cycloidal Magnetic Gear Speed Reducer, Modern Mechanical Engineering, Vol.3 No.4, 2013
• Ricardo Chicurel-Uziel
• Citations: 16 (Details)

• Vibration Control of a Gym Floor Using Tuned Mass Dampers: A Numerical Analysis, Modern Mechanical Engineering, Vol.3 No.3A, 2013
• Marcos Daniel Souza dos Santos, Daniel Valença Fiuza Lima, Jorge Eliécer Campuzano Carmona, Suzana Moreira Avila, Graciela Nora Doz de Carvalho
• Citations: 16 (Details)

• The Ratcheting Behaviour of Stainless Steel Pressurized Piping Elbows Subjected to Dynamic Out-of-Plane Moments, Modern Mechanical Engineering, Vol.4 No.3, 2014
• S. J. Zakavi, M. Nourbakhsh
• Citations: 14 (Details)

• Experimental and FEM Modal Analysis of a Deployable-Retractable Wing, Modern Mechanical Engineering, Vol.4 No.4, 2014
• P. Jia, S. K. Lai, W. Zhang, C. W. Lim
• Citations: 13 (Details)

• Determination of Factors and Quality Control of Car Painting Based on FMEA and SPC.V2, Modern Mechanical Engineering, Vol.8 No.2, 2018
• Masud Rana, Xinmin Zhang, Sayed Abdul Akher
• Citations: 13 (Details)

• The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP, Modern Mechanical Engineering, Vol.8 No.2, 2018
• Vincent A. Balogun, Omonigho B. Otanocha, Akii O. Ibhadode
• Citations: 12 (Details)

• Experimentation on Tool Wear and Surface Roughness in AISI D2 Steel Turning with WC Insert, Modern Mechanical Engineering, Vol.8 No.3, 2018
• N. López-Luiz, O. Jiménez Alemán, F. Alvarado Hernández, M. Montoya Dávila, V. H. Baltazar-Hernández
• Citations: 12 (Details)

• Study of Diffusion Instability in Some Ternary Gas Mixtures at Various Temperatures, Modern Mechanical Engineering, Vol.3 No.2, 2013
• Vladimir Kossov, Dyussembek Kulzhanov, Igor Poyarkov, Olga Fedorenko
• Citations: 12 (Details)

• Energy Efficiency Evaluation in Pumping System, Modern Mechanical Engineering, Vol.3 No.4, 2013
• Sharad P. Jagtap, Anand N. Pawar
• Citations: 12 (Details)

• Millimeter Scale MEMS Air Turbine Generator by Winding Wire and Multilayer Magnetic Ceramic Circuit, Modern Mechanical Engineering, Vol.2 No.2, 2012
• Akane Iizuka, Minami Takato, Masato Kaneko, Tatsuya Nishi, Ken Saito, Fumio Uchikoba
• Citations: 12 (Details)

• Simulating Coupled Longitudinal, Pitch and Bounce Dynamics of Trucks with Flexible Frames, Modern Mechanical Engineering, Vol.2 No.4, 2012
• D. Geoff Rideout
• Citations: 11 (Details)

• Dry Friction with Various Frictions Laws: From Wave Modulated Orbit to Stick-Slip Modulated, Modern Mechanical Engineering, Vol.5 No.2, 2015
• Paul Ndy Von Kluge, Djuidjé Kenmoé Germaine, Kofané Timoléon Crépin
• Citations: 11 (Details)

• Finite Element Model of a Filament-Wound Composite Tube Subjected to Uniaxial Tension, Modern Mechanical Engineering, Vol.7 No.4, 2017
• Gyula Szabó, Károly Váradi, Dávid Felhős
• Citations: 11 (Details)

• MHD Heat and Mass Transfer of an Oscillatory Flow over a Vertical Permeable Plate in a Porous Medium with Chemical Reaction, Modern Mechanical Engineering, Vol.8 No.3, 2018
• Mohammad Al Zubi
• Citations: 10 (Details)

• Application of Linear Model Predictive Control and Input-Output Linearization to Constrained Control of 3D Cable Robots, Modern Mechanical Engineering, Vol.1 No.2, 2011
• Ali Ghasemi
• Citations: 10 (Details)

• The Effect of Mass Ratio and Air Damper Characteristics on the Resonant Response of an Air Damped Dynamic Vibration Absorber, Modern Mechanical Engineering, Vol.1 No.2, 2011
• R. G. Todkar, S. G. Joshi
• Citations: 10 (Details)

• Structure Parameters Optimization Analysis of Hydraulic Hammer System, Modern Mechanical Engineering, Vol.2 No.4, 2012
• Guoping Yang, Jian Fang
• Citations: 10 (Details)

• Evaluation of Residual Stresses Induced by High Speed Milling Using an Indentation Method, Modern Mechanical Engineering, Vol.2 No.4, 2012
• Felipe Díaz, Claudio Mammana, Armando Guidobono
• Citations: 10 (Details)

• An Effective Approach for Optimal PZT Vibration Absorber Placement on Composite Structures, Modern Mechanical Engineering, Vol.3 No.1, 2013
• Suresh Venna, Yueh-Jaw Lin
• Citations: 9 (Details)

• Design, Development and Testing of an Air Damper to Control the Resonant Response of a SDOF Quarter-Car Suspension System, Modern Mechanical Engineering, Vol.1 No.2, 2011
• R. G. Todkar
• Citations: 9 (Details)

• Identifying Risk at the Conceptual Product Design Phase: A Web-Based Software Solution and Its Evaluation, Modern Mechanical Engineering, Vol.2 No.2, 2012
• Katie Grantham, Cassandra Elrod, Barry Flaschbart, William Kehr
• Citations: 9 (Details)

• Stress Analysis of Bolted Joints Part I. Numerical Dimensioning Method, Modern Mechanical Engineering, Vol.4 No.1, 2014
• László Molnár, Károly Váradi, Balázs Liktor
• Citations: 9 (Details)

• Design and Optimization of Wing Structure for a Fixed-Wing Unmanned Aerial Vehicle (UAV), Modern Mechanical Engineering, Vol.8 No.4, 2018
• Jiawen Yu
• Citations: 9 (Details)

• Failure Mechanism of O-Ring Seals under Extreme Operating Conditions, Modern Mechanical Engineering, Vol.8 No.1, 2018
• György Szabó, Károly Váradi
• Citations: 9 (Details)

• Optimisation of Effective Design Parameters for an Automotive Transmission Gearbox to Reduce Tooth Bending Stress, Modern Mechanical Engineering, Vol.7 No.2, 2017
• Mehmet Bozca
• Citations: 8 (Details)

• Design, Manufacture and Measurements of Beta-Type Stirling Engine with Rhombic Drive Mechanism, Modern Mechanical Engineering, Vol.6 No.4, 2016
• Mohammed Yunus, Mohammad S. Alsoufi, Anil Kumar Rathod
• Citations: 8 (Details)

• A Statistical Theory of the Damage of Materials, Modern Mechanical Engineering, Vol.6 No.4, 2016
• Georgi Zachariev
• Citations: 8 (Details)

• Pipe Inspection System by Guide Wave Using a Long Distance Waveguide, Modern Mechanical Engineering, Vol.5 No.4, 2015
• Riichi Murayama, Kenshi Matsumoto, Kenji Ushitani, Makiko Makiko
• Citations: 8 (Details)

• Intelligent Winding Machine of Plastic Films for Preventing Both Wrinkles and Slippages, Modern Mechanical Engineering, Vol.6 No.1, 2016
• Hiromu Hashimoto
• Citations: 8 (Details)

• Fault Detection of Fuel Injectors Based on One-Class Classifiers, Modern Mechanical Engineering, Vol.4 No.1, 2014
• Dimitrios Moshou, Athanasios Natsis, Dimitrios Kateris, Xanthoula-Eirini Pantazi, Ioannis Kalimanis, Ioannis Gravalos
• Citations: 8 (Details)

• The Effect of the Variation of the Downstream Region Distance and Butterfly Valve Angle on Flow Characteristics in a 90 Degree Bended Elbow, Modern Mechanical Engineering, Vol.4 No.3, 2014
• Se Youl Won, Jae Gon Lee, Jun Seok Yang
• Citations: 7 (Details)

• The Study of Contact Pressure Analyses and Prediction of Dynamic Fatigue Life for Linear Guideways System, Modern Mechanical Engineering, Vol.3 No.2, 2013
• Thin-Lin Horng
• Citations: 7 (Details)

• Artificial Neural Networks for Controlling the Temperature of Internally Cooled Turning Tools, Modern Mechanical Engineering, Vol.3 No.2A, 2013
• Frank Wardle, Timothy Minton, Saiful Bin Che Ghani, Paul Fϋrstmann, Martin Roeder, Sebastian Richarz, Fiona Sammler
• Citations: 7 (Details)

• Mechanical Behavior of Glass Fiber Reinforced Polymer Pultruded Composite Gratings, Modern Mechanical Engineering, Vol.3 No.4, 2013
• Rahul Mangire, Malur N. Srinivasan
• Citations: 7 (Details)

• A Novel Extrusion Microns Embossing Method of Polymer Film, Modern Mechanical Engineering, Vol.2 No.2, 2012
• Ying Liu, Wenlong Liu, Yajun Zhang, Daming Wu, Xinliang Wang
• Citations: 7 (Details)

• Experimental and Numerical Study of Impact of Air Filter Holes Masking on Altitude at Heavy-Duty Diesel Engine, Modern Mechanical Engineering, Vol.2 No.4, 2012
• Sepideh Hosseinzadeh, Mofid Gorji-Bandpy, Ghasem Javadi Rad, Mojtaba Keshavarz
• Citations: 7 (Details)

• Development of a Multiple Degree of Freedom Knee Disarticulation Prosthesis with Active Leg Length Variation, Modern Mechanical Engineering, Vol.4 No.4, 2014
• Berend Denkena, Martin Eckl, Dominik Brouwer
• Citations: 7 (Details)

• Elastic Bending Deformation of the Drill Strings in Channels of Curve Wells, Modern Mechanical Engineering, Vol.7 No.1, 2017
• Nabil Wanas Musa
• Citations: 7 (Details)

• Bending Analysis of a Filament-Wound Composite Tube, Modern Mechanical Engineering, Vol.8 No.1, 2018
• Gyula Szabó, Károly Váradi, Dávid Felhős
• Citations: 7 (Details)

• Model Based Pressure Control of a Push Belt Continuously Variable Transmission, Modern Mechanical Engineering, Vol.6 No.4, 2016
• Bashar Alzuwayer, Aviral Singh, Prasanth Muralidharan, Zhijun Han
• Citations: 6 (Details)

• Numerical Study of Heat Transfer and Flow Bifurcation of CuO Nanofluid in Sudden Expansion Microchannel Using Two-Phase Model, Modern Mechanical Engineering, Vol.7 No.2, 2017
• Farhad A. Abbassi, Mohsen Nazari, Mohammad Mohsen Shahmardan
• Citations: 6 (Details)

• Structural Design via Genetic Optimization, Modern Mechanical Engineering, Vol.7 No.3, 2017
• David Webb, Wissam Alobaidi, Eric Sandgren
• Citations: 6 (Details)

• Experimental Study of Soot Volume Fraction Applied in Laminar Diffusion Flames, Modern Mechanical Engineering, Vol.3 No.4, 2013
• N. R. Caetano, F. M. Pereira, H. A. Vielmo, F. T. van der Lann
• Citations: 6 (Details)

• Determination of Residuals Stresses Induced by the Autofrettage Treatment by the X-Rays Diffraction Method, Modern Mechanical Engineering, Vol.3 No.3, 2013
• Naziha Zerari, Tarik Saidouni, Abdelouaheb Benretem
• Citations: 6 (Details)

• Finite-Element Analysis of Parts Stress State of Tight Joint Assembled by Press Fitting, Modern Mechanical Engineering, Vol.4 No.4, 2014
• Sinitsyna Vasilya, Sinitsyn Anton
• Citations: 6 (Details)

• The Research about Prescribed Workspace for Optimal Design of 6R Robot, Modern Mechanical Engineering, Vol.4 No.3, 2014
• Yi Gan, Weiwei Yu, Weiming He, Junlei Wang, Fujia Sun
• Citations: 5 (Details)

• A Study on the Sensor Applications for Position Detection and Guideway Monitoring in High Speed Maglev, Modern Mechanical Engineering, Vol.4 No.4, 2014
• Jinho Lee, Jeongmin Jo, Yongjae Han, Changyoung Lee, Yan Sun
• Citations: 5 (Details)

• Semi-Analytical Approach for Stiffness Estimation of 3-DOF PKM, Modern Mechanical Engineering, Vol.4 No.2, 2014
• Hailemariam Nigus
• Citations: 5 (Details)

• Stress Analysis of Bolted Joints Part II. Contact and Slip Analysis of a Four Bolt Joint, Modern Mechanical Engineering, Vol.4 No.1, 2014
• László Molnár, Károly Váradi, János Holubán, Andor Tamási
• Citations: 5 (Details)

• Experimental Verification of Fault Predictions in High Pressure Hydraulic Systems, Modern Mechanical Engineering, Vol.4 No.2, 2014
• P. Athanasatos, D. Koulocheris, Th. Costopoulos, V. Spitas
• Citations: 5 (Details)

• Homotopy Analysis Method for Large-Amplitude Free Vibrations of Strongly Nonlinear Generalized Duffing Oscillators, Modern Mechanical Engineering, Vol.2 No.4, 2012
• Youhua Qian, Dongxu Ren, Shengmin Chen, Lin Ping
• Citations: 5 (Details)

• Micro Transportation Systems: A Review, Modern Mechanical Engineering, Vol.1 No.2, 2011
• Phuc Hong Pham, Dzung Viet Dao
• Citations: 5 (Details)

• Investigation of Hot Formability of AZ61 Mg Alloy, Modern Mechanical Engineering, Vol.5 No.2, 2015
• Maziar Ramezani, Thomas Neitzert
• Citations: 5 (Details)

• Whirl Interaction of a Drill Bit with the Bore-Hole Bottom, Modern Mechanical Engineering, Vol.5 No.3, 2015
• Nabil W. Musa, V. I. Gulyayev, L. V. Shevchuk, Hasan Aldabas
• Citations: 5 (Details)

• Pillow-Type Computer Input Device for Serious Spinal Cord Injury, Modern Mechanical Engineering, Vol.5 No.3, 2015
• Jiangli Yu, Takakazu Ishimatsu, Chao Zhang, Lawn Murray, Motohiro Tanaka
• Citations: 5 (Details)

• Response Surface Methodology Approach for Transmission Optimization of V-Belt Drive, Modern Mechanical Engineering, Vol.6 No.1, 2016
• Nurudeen A. Raji, Andrew A. Erameh, Abiodun A. Yussouff, Rasheed O. Durojaye
• Citations: 5 (Details)

• Study of Mechanical and Micro-Structural Effect on Alkaline Treated Sponge Gourd ( Luffa aegyptiaca ) Fibre Epoxy Composite, Modern Mechanical Engineering, Vol.6 No.1, 2016
• S. I. Ichetaonye, D. N. Ichetaonye, O. G. Tenebe
• Citations: 5 (Details)

• An Underactuated Linkage Finger Mechanism for Hand Prostheses, Modern Mechanical Engineering, Vol.8 No.2, 2018
• H. M. C. M. Herath, R. A. R. C. Gopura, Thilina D. Lalitharatne
• Citations: 5 (Details)

• The Light Weight Design of Mowing Vehicle Frame with a Combined Method, Modern Mechanical Engineering, Vol.8 No.3, 2018
• Shunming Li, Kun Xu, Jinrui Wang
• Citations: 4 (Details)

• Study on Aerodynamic Characteristics of Supersonic Airfoil, Modern Mechanical Engineering, Vol.9 No.1, 2019
• Wentao Yong
• Citations: 4 (Details)

• Cooling of Granules in Vibrating, Suspended Bed: Engineering Simulation, Modern Mechanical Engineering, Vol.6 No.2, 2016
• Valery Katz, Slava Katz
• Citations: 4 (Details)

• Location Results for Brace Spacing in Gap Tubular “K” Joints Using FEM, Modern Mechanical Engineering, Vol.3 No.1, 2013
• P. N. Jiki
• Citations: 4 (Details)

• An ARX-Based PID-Sliding Mode Control on Velocity Tracking Control of a Stick-Slip Pi-ezoelectric-Driven Actuator, Modern Mechanical Engineering, Vol.5 No.1, 2015
• Y. Cao, X. B. Chen
• Citations: 4 (Details)

• Use of Vehicle Power-Train Simulation with AMT for Fuel Economy and Performance, Modern Mechanical Engineering, Vol.3 No.3, 2013
• Nagwa Ahmed Abdel-Halim
• Citations: 4 (Details)

• Intelligent Fault Detection of Retainer Clutch Mechanism of Tractor by ANFIS and Vibration Analysis, Modern Mechanical Engineering, Vol.3 No.3A, 2013
• Ebrahim Ebrahimi, Payam Javadikia, Mohammad Hadi Jalili, Nasrolah Astan, Majid Haidari, Mojtaba Bavandpour
• Citations: 4 (Details)

• Flywheel Energy Storage with Mechanical Input-Output for Regenerative Braking, Modern Mechanical Engineering, Vol.4 No.4, 2014
• Ricardo Chicurel-Uziel
• Citations: 3 (Details)

• Heat Flux Analysis in Electrical Transformers through Integral Operators of Mechanics, Modern Mechanical Engineering, Vol.4 No.2, 2014
• Francisco Bulnes, Alejandro R. Tello, Máximo Livera
• Citations: 3 (Details)

• Five Degree of Freedom Manipulator Motion Simulation Based on Virtual Environment, Modern Mechanical Engineering, Vol.3 No.1, 2013
• Ling Wen, Yu Zhang, Lufeng Luo, Cong Zhang
• Citations: 3 (Details)

• Virtual Prototype Modeling and Simulation of Pipe Wagon Articulating System, Modern Mechanical Engineering, Vol.1 No.2, 2011
• Ying Li, Samuel Frimpong, Wenyuan Liu
• Citations: 3 (Details)

• Study on Performance of Laminar Taylor-Couette Flow with Different Developed Procedures, Modern Mechanical Engineering, Vol.2 No.1, 2012
• Xiantao Zhou, Yan Shi, Yinghuang Kong
• Citations: 3 (Details)

• A Comparative Study of Stress Recovery Method and Error Estimation of Plate Bending Problem Using DKMQ Element, Modern Mechanical Engineering, Vol.2 No.2, 2012
• Irwan Katili, Aziz Hamdouni, Olivier Millet, J. I. Rastandi, Imam J. Maknun
• Citations: 3 (Details)

• Influence of Internal Combustion Engine Parameters on Gas Leakage through the Piston Rings Area, Modern Mechanical Engineering, Vol.7 No.1, 2017
• Waleed Momani
• Citations: 3 (Details)

• Approaches for Detailed Modelling of Ultra-Precision Positioning Systems, Modern Mechanical Engineering, Vol.6 No.1, 2016
• Dominik Dahlmann, Nesrine Sassi, Berend Denkena
• Citations: 3 (Details)

• Adaptive Real-Coded Genetic Algorithm for Identifying Motor Systems, Modern Mechanical Engineering, Vol.5 No.3, 2015
• Rong-Fong Fung, Chun-Hung Lin
• Citations: 3 (Details)

• Thermal-Mechanical Coupled FE Analysis for Rotary Shaft Seals, Modern Mechanical Engineering, Vol.8 No.1, 2018
• György Szabó, Károly Váradi
• Citations: 3 (Details)

• An Interactive Evolutionary Environment for Creative Design, Modern Mechanical Engineering, Vol.11 No.2, 2021
• Wissam M. Alobaidi, Eric Sandgren
• Citations: 3 (Details)

• Combined Effect of a Catalytic Reduction Device with Waste Frying Oil-Based Biodiesel on NOx Emissions of Diesel Engines, Modern Mechanical Engineering, Vol.12 No.3, 2022
• Samson K. Fasogbon, Vincent N. Ugwah, Olaleye M. Amoo, Patrick Ajaero, Ogagaoghene D. Emma-Egoro
• Citations: 3 (Details)

• Disassembly Evaluation in Design of a System Using a Multi-Parameters Index, Modern Mechanical Engineering, Vol.10 No.1, 2020
• Aslain Brisco Ngnassi Djami, Wolfgang Nzié, Serge Doka Yamigno
• Citations: 2 (Details)

• Evaluating the Structural Integrity of Fibreglass for the Manufacture of Headgears, Modern Mechanical Engineering, Vol.11 No.2, 2021
• Olusegun A. Adefuye, Nurudeen A. Raji, Rafiu O. Kuku, Timothy Oyetade, Ridwan O. Ola-Gbadamosi
• Citations: 2 (Details)

• Port-Hamiltonian Based Control of the Sun-Earth 3D Circular Restricted Three-Body Problem: Stabilization of the L₁ Lagrange Point, Modern Mechanical Engineering, Vol.10 No.3, 2020
• Haotian Yan
• Citations: 2 (Details)

• Feasibility Study to Install Wind Farm in Bab Al-Hawa, Irbid, Northwest of Jordan, Modern Mechanical Engineering, Vol.9 No.1, 2019
• Mohammad Al-Smairan, Omar Al-Nhoud
• Citations: 2 (Details)

• Creep-Fatigue Interaction Life Consumption of Industrial Gas Turbine Blades, Modern Mechanical Engineering, Vol.8 No.4, 2018
• Ebigenibo Genuine Saturday, Thank-God Isaiah
• Citations: 2 (Details)

• Performance Study of Refrigeration Units That Use the Refrigerant R-404A by Using Computer Simulation, Modern Mechanical Engineering, Vol.6 No.2, 2016
• Abed Alrzaq Sleman Alshqirate
• Citations: 2 (Details)

• Optimizing the Sandwich Composite Structure in the Cantilever Beam, Modern Mechanical Engineering, Vol.7 No.4, 2017
• Tuo Hu
• Citations: 2 (Details)

• Design and Optimization of Comb Drive Accelerator for High Frequency Oscillation, Modern Mechanical Engineering, Vol.8 No.1, 2018
• Zichen Zhang
• Citations: 2 (Details)

• Analysis of Plate Vibration under Exponentially Varying Thermal Condition, Modern Mechanical Engineering, Vol.1 No.1, 2011
• Tripti johri, Indu Johri
• Citations: 2 (Details)

• Performance Improvement of the LM Device and Its Application to Precise Measurement of Motion Trajectories within a Small Range with a Machining Centre, Modern Mechanical Engineering, Vol.2 No.3, 2012
• Hua Qiu, Yong Yue, Akio Kubo, Chao Lin, Kai Cheng, Dehong Huo, Dayou Li
• Citations: 2 (Details)

• Investigation of Stresses on Tie Band Used to Wrap and Fasten Rolled Coils, Modern Mechanical Engineering, Vol.2 No.3, 2012
• Chongsun Lee, Ilsup Jung
• Citations: 2 (Details)

• Quasi-Relaxation Transforms, Meromorphic Curves and Hereditary Integrals of the Stress-Deformation Tensor to Metallic Specimens, Modern Mechanical Engineering, Vol.2 No.3, 2012
• Francisco Bulnes, Yuri Stropovsvky, Viacheslav Yermishkin
• Citations: 2 (Details)

• Semi-Automatic Modeling Technique of Torque Converter Flow Passage, Modern Mechanical Engineering, Vol.3 No.2, 2013
• Shiping Liu, Shujuan Zheng
• Citations: 2 (Details)

• Numerical Simulation of Shock Resistant Microsystems (MEMS), Modern Mechanical Engineering, Vol.4 No.3, 2014
• Yubin Lu, Yongsheng Cheng, Yuancheng Sun
• Citations: 1 (Details)

• Study of Stress Sources and Critical Stress Combinations for the Input Shaft of a Longitudinally Mounted Four Speed Automotive Automatic Transmission Model, Modern Mechanical Engineering, Vol.3 No.1, 2013
• N. A. Abdel-Halim
• Citations: 1 (Details)

• Lever-Loading System Analysis and Application, Modern Mechanical Engineering, Vol.3 No.1, 2013
• Bingli Liu, Bo Zang, Hongbiao Quan
• Citations: 1 (Details)

• A New Differential Operator Method to Study the Mechanical Vibration, Modern Mechanical Engineering, Vol.2 No.3, 2012
• Quansheng Ji, Xiaomei Ji, Linhong Ji, Yuxi Zheng
• Citations: 1 (Details)

• Research on Lubrication Model of Rock Bit Bearings with Non-Newtonian Medium, Modern Mechanical Engineering, Vol.2 No.1, 2012
• Guorong Wang, Wang Juan, Lin Zhong
• Citations: 1 (Details)

• Structural-Energy Characteristics of Tribotechnical Contact in Unsteady Operational Modes, Modern Mechanical Engineering, Vol.6 No.3, 2016
• Tareq M. A. Al-Quraan, Oksana O. Mikosyanchik, Rudolph G. Mnatsakanov, Olexander I. Zаporozhets
• Citations: 1 (Details)

• Coherent Application of a Contact Structure to Formulate Classical Non-Equilibrium Thermodynamics, Modern Mechanical Engineering, Vol.7 No.1, 2017
• Edwin Knobbe, Dirk Roekaerts
• Citations: 1 (Details)

• Development of a Flexible Multibody Model to Simulate Nonlinear Effects in Printing Process, Modern Mechanical Engineering, Vol.6 No.1, 2016
• Martin Eckl, Thomas Lepper, Berend Denkena
• Citations: 1 (Details)

• FE Dynamic Analysis Using Moving Support Element on Multi-Span Beams Subjected to Support Motions, Modern Mechanical Engineering, Vol.5 No.4, 2015
• Yong-Woo Kim, Seoung Yeal Lee
• Citations: 1 (Details)

• Pure Condition of Both 6R Serial and 3-PRS Parallel Robots Using Grassmann-Cayley Algebra, Modern Mechanical Engineering, Vol.8 No.4, 2018
• Luc Djimon Clément Akonde, Alain Adomou, Tognon Clotilde Guidi
• Citations: 1 (Details)

• Effects of the Reynolds and Weissenberg’s Numbers on the Stability of Linear Pipe Flow of Viscous Fluid, Modern Mechanical Engineering, Vol.8 No.4, 2018
• Ibrahima Kama, Mamadou Lamine Sow, Kodjo Kpode, Cheikh Mbow
• Citations: 1 (Details)

• Coupling for Parallel Non-Collinear Shafts, Modern Mechanical Engineering, Vol.9 No.3, 2019
• Ricardo Chicurel, Gabriel Ascanio
• Citations: 1 (Details)

• Koopman Reduced Order Control for Three Body Problem, Modern Mechanical Engineering, Vol.9 No.1, 2019
• Haoze Tang
• Citations: 1 (Details)

• Design Analysis of Bevel Gear for Gearmotor Selection in Revolving Platform, Modern Mechanical Engineering, Vol.11 No.1, 2021
• Nurudeen A. Raji, Kasali A. Adedeji, Elkanah O. Oyetunji, Ayodeji D. Agbelusi
• Citations: 1 (Details)

• Millimeter-Scale Liquid Droplet Migration on Solid Surface with Temperature Gradient: A Simulation Investigation, Modern Mechanical Engineering, Vol.10 No.3, 2020
• Zheng Jingyuan
• Citations: 1 (Details)

• Model Design and Development of a Telescopic Palm Fruit Harvester, Modern Mechanical Engineering, Vol.13 No.1, 2023
• Peter Okechukwu Chikelu
• Citations: 1 (Details)