Laureto, J.J. and Pearce, J.M. (2018) Anisotropic Mechanical Property Variance between ASTM D638-14 Type I and Type IV Fused Filament Fabricated Specimens. Polymer Testing, 68, 294-301. https://doi.org/10.1016/j.polymertesting.2018.04.029

has been cited by the following article:

• TITLE: The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques

  AUTHORS: Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

  KEYWORDS: Acrylonitrile Butadiene Styrene (ABS), Injection Molding, Additive Manufacturing, Compression Molding, Universal Testing Machine (UTM)

  JOURNAL NAME: Open Access Library Journal, Vol.10 No.5, May 24, 2023

  ABSTRACT: This project presents a comparative study of the mechanical properties of Acrylonitrile Butadiene Styrene (ABS). The specimens per ASTM D638 type IV were fabricated by injection molding, compression molding, and 3D printing. ABS is recommended for the precision machining of ABS structural parts. ABS has a good balance of impact, heat, chemical resistance, dimensional stability, tensile strength, and surface hardness. ABS pallets from one batch are used in compression molding, injection molding, and filament extrusion for 3D printing. The compression molding process parameters are optimized to obtain high mechanical properties of ABS specimens. After building models in the preceding three processes, samples were evaluated using a Universal Tensile Machine (UTM). Then, using the UTM machine, Young’s modulus (GPa), yield strength, and strain were calculated at the various test speeds (mm/min). The later obtained results were calculated in conjunction with previous studies and results.