Cutting Speed - Articles - Scientific Research Publishing

Analysis of the Machining Characteristics on Surface Roughness of a Hybrid Aluminium Metal Matrix Composite (Al6061-SiC-Al₂O₃) (Articles)

T. Sasimurugan, K. Palanikumar

J. of Minerals and Materials Characterization and Eng. Vol.10 No.13，November 1, 2011

DOI: 10.4236/jmmce.2011.1013094 6,804 Downloads 10,222 Views Citations
Comprehensive Study on Machinability of Titanium Composite (Articles)

Basim A. Khidhir

Journal of Materials Science and Chemical Engineering Vol.4 No.2，February 1, 2016

DOI: 10.4236/msce.2016.42001 3,844 Downloads 5,081 Views Citations
Grey Relational Optimization of Turning Parameters in Dry Machining of Austenitic Stainless Steel Using Zr Based Coated Tools (Articles)

Kaushik Vijaya Prasad, Kishore Triambak Kashyap, Madapat Job Richard, Posina Gerard Prabhu Rao, Abhishek Rajole, Rabara Hiren

Open Journal of Applied Sciences Vol.7 No.7，July 14, 2017

DOI: 10.4236/ojapps.2017.77027 1,125 Downloads 2,186 Views Citations
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2，May 31, 2023

DOI: 10.4236/mme.2023.132003 218 Downloads 733 Views Citations
Effects of Cutting Interval between Harvests on Dry Matter Yield and Nutritive Value in Alfalfa (Articles)

Doohong Min

American Journal of Plant Sciences Vol.7 No.8，June 17, 2016

DOI: 10.4236/ajps.2016.78118 2,644 Downloads 4,109 Views Citations
A Polynomial Algorithm of Optimum Cutting a Rectangle into Rectangles with Two Heights (Articles)

M. Z. Arslanov

American Journal of Operations Research Vol.4 No.1，January 23, 2014

DOI: 10.4236/ajor.2014.41003 4,040 Downloads 5,926 Views Citations
Vegetable and Mineral Used Oils as Cutting Fluids: Effect on Surface Roughness of Aluminum Alloy (Articles)

Nabeel Gharaibeh

J. of Surface Engineered Materials and Advanced Technology Vol.6 No.4，October 12, 2016

DOI: 10.4236/jsemat.2016.64016 3,351 Downloads 6,157 Views Citations
Influence of Cutting and Geometrical Parameters on the Cutting Force in Milling (Articles)

Hedi Yangui, Bacem Zghal, Amir Kessentini, Gaël Chevallier, Alain Rivière, Mohamed Haddar, Chafik Karra

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210097 8,030 Downloads 15,502 Views Citations
The P40 Cutting Tool Wear Modelization Machining Fk20MnCr5 (Articles)

Idriss Amara, Embarek Ferkous, Fayçal Bentaleb, Razika Aouad

Engineering Vol.3 No.9，September 23, 2011

DOI: 10.4236/eng.2011.39114 5,302 Downloads 9,221 Views Citations
Elucidation on Reactions Thermodynamics and Kinetics of OFC-A of Steels (Articles)

A.V. Adedayo

J. of Minerals and Materials Characterization and Eng. Vol.9 No.7，July 20, 2010

DOI: 10.4236/jmmce.2010.97043 3,689 Downloads 5,160 Views Citations
Evaluating the Impacts of Forest Clear Cutting on Water and Sediment Yields Using SWAT in Mississippi (Articles)

Sunita Khanal, Prem B. Parajuli

Journal of Water Resource and Protection Vol.5 No.4，April 25, 2013

DOI: 10.4236/jwarp.2013.54047 5,704 Downloads 10,417 Views Citations
Identifying Optimal Cutting Parameters in Drilling of Titanium Aluminum Vanadium Using Finite Element Analysis (Articles)

M. M. Reddy, S. R. Kostka, N. S. Reddy

J. of Surface Engineered Materials and Advanced Technology Vol.10 No.3，July 12, 2020

DOI: 10.4236/jsemat.2020.103004 438 Downloads 1,174 Views Citations
The Biology of Szelenyiopria talitae (Hymenoptera: Diapriidae): Larval Parasitoid of the Leaf-Cutting Ant Acromyrmex subterraneus (Hymenoptera: Formicidae) (Articles)

Thalles Cardoso Mattoso, Denise Delores Oliveira Moreira, Thais Berçot Pontes Teodoro, Claudio Luiz Moreira de Souza, Rita de Kássia Guarnier da Silva, Veronica de Morais, Carlos Peres Silva, Milton Erthal Jr., Richard Ian Samuels

Advances in Entomology Vol.9 No.3，July 26, 2021

DOI: 10.4236/ae.2021.93012 333 Downloads 1,142 Views Citations
Assessment of Female Genital Cutting Practice and Its Drivers among Women of Reproductive Age in a Rural Community in South-West Nigeria (Articles)

Rachael Y. Ogunseun, Akintunde O Fehintola, Temitope Ilori, Akinfolarin C. Adepiti, Elizabeth O. Olagunju, Adekemi Olowokere, Caleb A Adegbenro, Anu S. Olowookere

Open Journal of Obstetrics and Gynecology Vol.14 No.12，December 23, 2024

DOI: 10.4236/ojog.2024.1412154 55 Downloads 290 Views Citations
The Study of Dichinama Marble Waste and Its Utilization in Tigray Ethiopia (Articles)

Kiross Haile Zeweli, Meskerem Teshome Hailu

International Journal of Nonferrous Metallurgy Vol.12 No.1，January 27, 2025

DOI: 10.4236/ijnm.2025.121001 33 Downloads 178 Views Citations
Artificial Logging or Natural Growth (Articles)

Ziyi Wang, Jiaxin Lu, Fuxing Chu, Xiangrui Li

Open Journal of Applied Sciences Vol.12 No.7，July 15, 2022

DOI: 10.4236/ojapps.2022.127081 187 Downloads 668 Views Citations
A Research on Emergency DC Power Support Based on DCOI (Articles)

Fan Fan, Yingmin Zhang, Xingyuan Li, Wei Ma

Energy and Power Engineering Vol.5 No.4B，November 11, 2013

DOI: 10.4236/epe.2013.54B166 4,437 Downloads 5,465 Views Citations
Cutting and other forms of derma-abuse in adolescents (Articles)

Hari D. Maharajh, Rainah Seepersad

Health Vol.2 No.4，May 4, 2010

DOI: 10.4236/health.2010.24055 5,896 Downloads 12,040 Views Citations
Optimization of Surface Milling of Hardened AISI4340 Steel with Minimal Fluid Application Using a High Velocity Narrow Pulsing Jet of Cutting Fluid (Articles)

K. Leo Dev Wins, A. S. Varadarajan, B. Ramamoorthy

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210102 5,265 Downloads 9,903 Views Citations
Deep-Sea Cobalt Crusts Water Jet Cutting Ability (Articles)

Zhonghua Huang, Ya Xie

Geomaterials Vol.1 No.2，July 29, 2011

DOI: 10.4236/gm.2011.12007 6,265 Downloads 10,850 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies