Analysis of the Machining Characteristics on Surface Roughness of a Hybrid Aluminium Metal Matrix Composite (Al6061-SiC-Al<sub>2</sub>O<sub>3</sub>)

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1.55
Citations

Journals Menu

"Analysis of the Machining Characteristics on Surface Roughness of a Hybrid Aluminium Metal Matrix Composite (Al6061-SiC-Al₂O₃)"
written by T. Sasimurugan, K. Palanikumar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Growth of AlN coating on Al-6061 alloy surface
	Surface and Coatings …, 2024

[2]	Experimental Analysis of Machining Parameters In Turning of Aluminum 7075
	Journal of Computers, Mechanical and Management, 2023

[3]	Investigation of surface integrity up-milling magnesium oxide particle reinforced wood-based composite
	International Journal of …, 2023

[4]	Optimization of Surface Roughness and Tool Wear during Machining of AMMC using Taguchi Technique
	CHIANG MAI JOURNAL …, 2022

[5]	Aluminum metal composites primed by fused deposition modeling-assisted investment casting: Hardness, surface, wear, and dimensional properties
	Proceedings of the …, 2022

[6]	Workability Studies on Al6061 Alloy and Al6061 Metal Matrix Composites Reinforced with Silicon Carbide Particles Under Cold Backward Extrusion
	Journal of The Institution …, 2022

[7]	Statistical investigation of the machining of aluminum LM-25/SiC metal matrix composite
	Materials Today: Proceedings, 2022

[8]	Turning of Aluminium Composites: Characteristics and Future Prospects
	IOP Conference Series: Materials Science …, 2022

[9]	Machinability Studies on Hybrid Aluminum Metal Matrix Composites
	IOP Conference Series: Materials …, 2022

[10]	Machining Studies of Basalt Fiber Reinforced Aluminium Metal Matrix Composites Using Abrasive Jet Machining
	Functional …, 2022

[11]	Optimization of Wire Cut Electric Discharge Machining Characteristics of Hybrid Aluminium Composites (Al6061/Gr/SiCp) Using Taguchi Method
	… Machining Strategies for …, 2022

[12]	Effect of ZrB2 Nano-Ingredient on Uncoated Tool Wear for Aluminum Alloys-Based Metal Matrix Composite
	Innovations in Mechanical Engineering, 2022

[13]	Analysis of Effect of Processing Factors on Surface Roughness and Sintered Density of Powder Metallurgy Composites
	Current Advances in …, 2021

[14]	Effect of Cutting Parameters on Surface Roughness of LM2 (Al-9% Si)–Al2O3 Metal Matrix Composite fabricated by Squeeze Casting Method
	2021

[15]	Hybrid reinforced aluminum matrix composites fabricated by selective laser melting
	2021

[16]	Statistical Optimization by Response Surface Methodology of Process Parameters During the CNC Turning Operation of Hybrid Metal Matrix Composite
	2021

[17]	Influence of processing conditions and issues in Machining of aluminum metal matrix composites
	2021

[18]	Addition of Beryl Content to Aluminum 2024 Alloy Influencing the Slide Wear and Friction Characteristics
	2021

[19]	Multi-objective Optimization of Turning Parameters for SiC-or Al 2 O 3-Reinforced Aluminum Matrix Composites
	2021

[20]	Mechanical, tribological and microstructural characterization of stir cast Al-6061 metal/matrix composites—a comprehensive review
	2021

[21]	Experimental investigation of machinability in laser-assisted machining of aluminum-based nanocomposites
	Journal of Materials Research …, 2021

[22]	Review on Effect Shape and Size on Al Alloy Metal Matrix Composites in EDM of Tool
	2020

[23]	Investigation of the Effect on Copper and Silicon Additives on Machinability in Turning of Al-25Zn Alloy with CVD-Al2O3 Coated Tools
	2020

[24]	Improvement the Bar Bow of Al2O3-TiC Thinner Bar in High Precision of Grinding and Cutting Processes
	2020

[25]	Assessment of Surface Roughness in EDM of RHA, Cu and Mg Reinforced Hybrid MMC using L27 Taguchi's Orthogonal Array
	2020

[26]	Automotive industry application of aluminium-based hybrid metal matrix composite
	2020

[27]	3D Visualization and Topographical Analysis in Turning of Hybrid MMC By CNC Lathe SPRINT 16TC Made of BATLIBOI
	2020

[28]	Experimental Investigation on Microstructural and Wear Behaviour of Dual Reinforced Particles (DRP) Aluminium Alloy Composites
	2020

[29]	Bakır ve Silisyum İlavelerinin Al-25Zn Alaşımının CVD Al2O3 Kaplamalı Takımlarla Tornalanmasında İşlenebilirliğe Etkisinin İncelenmesi
	2020

[30]	Investigation of the tool wear, surface roughness, and chip formation in the machining of ZrO 2-reinforced aluminum composites
	2020

[31]	Parametric Optimization of Rice Husk Ash, Copper, Magnesium reinforced Aluminium Matrix hybrid Composite processed by EDM
	2019

[32]	Study of Peripheral Milling of Magnesium Matrix Composite
	2019

[33]	Influence of rice husk ash, Cu, Mg on the mechanical behaviour of Aluminium Matrix hybrid composites
	2019

[34]	Study on Microstructure and EDAX Analysis of Al/SiC/Gr Hybrid Metal Matrix Composites
	2019

[35]	Investigation of cutting tool wear behaviors in machining of silicon carbide and magnesium oxide reinforced aluminum 2024 matrix composites
	2019

[36]	EVALUATION OF MACHINING PARAMETERS & SURFACE ROUGHNESS OF AL4600/SIC METAL MATRIX COMPOSITE BY TAGUCHI EXPERIMENTAL …
	2019

[37]	Parametric Study During Abrasive Water Jet Turning of Hybrid Metal Matrix Composite
	Advances in Manufacturing Engineering and Materials, 2019

[38]	A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
	2018

[39]	Optimization of Process Parameters of 16-TC Botliboi CNC During Machining of Hybrid Metal Matrix Composites
	2018

[40]	Surface Integrity analysis of Wire-EDM on in-situ hybrid composite A359/Al2O3/B4C
	2018

[41]	Aluminium Composites Fabrication Technique and Effect of Improvement in Their Mechanical Properties–A Review
	2018

[42]	Aluminium metal matrix composites: A retrospective investigation
	2018

[43]	A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
	"JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY", 2018

[44]	Optimization of Machining Parameters for CNC Turning of Al/Al2O3 MMC Using RSM Approach
	Materials Today: Proceedings, 2018

[45]	An Investigation into Orthogonal and Oblique Cutting Processes
	2018

[46]	A COMPARATIVE STUDY ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF ALUMINUM ALLOY AND THE MMC
	International Journal of Research Sciences and Advanced Engineering [IJRSAE], 2017

[47]	Performance investigation of aluminum 6061 metal matrix composite
	2017

[48]	Experimental Investigation of Peripheral Milling of Functionally Gradient Al-SiC Metal Matrix Composite
	2017

[49]	Machining Investigation on Hybrid Metal Matrix Composites-A Review
	Materials Today: Proceedings, 2017

[50]	Experimental Studies on Influence of Redmud on Thrust force and Surface Roughness of Novel Al6061 Hybrid Composites
	2017

[51]	Sustainable End Milling of Difficult-Materials
	2017

[52]	COMPARISONS OF PARAMETERS IN ELE MACHINING OF ALU HYBRID NANO METAL M
	International Journal of Mechanical Engineering and Technology, 2017

[53]	Optimization of Machining Parameters in CNC Turning of Hybrid Metal Matrix Composites Using Different Techniques: A Review
	2017

[54]	A review on the intensification of metal matrix composites and its nonconventional machining
	Science and Engineering of Composite Materials, 2016

[55]	Experimental Investigation and Optimization of Machining Parameters using Grey-Relational Analysis Approach and Fuzzy Based Taguchi Loss Function Method
	2016

[56]	FABRICATION OF HYBRID MMCS AND THEIR FUTURE SCOPE–A REVIEW
	International Research Journal of Engineering and Technology, 2016

[57]	Effect of HSS and Tungsten Carbide Tools on Surface Roughness of Aluminium Alloy during Turning Operation
	2016

[58]	Manufacturing of aluminium nano hybrid composites: a state of review
	IOP Conference Series: Materials Science and Engineering, 2016

[59]	ALUMINIUM MATRIX HYBRID COMPOSITES: A REVIEW OF DIFFERENT REINFORCEMENTS ON MECHANICAL AND TRIBOLOGICAL CHARACTERISTICS
	International Journal of Exploring Emerging Trends in Engineering, 2016

[60]	Tool Wear Analysis of Al 6061 Reinforced with 10 wt% Al2O3 Using High Hardened Inserts
	Applied Mechanics and Materials, 2015

[61]	Aluminium Metal Matrix composite–an insight into solid state and liquid state processes
	2015

[62]	Studies on machining parameters while milling particle reinforced hybrid (Al6061/Al2O3/Gr) MMC
	Journal of Environmental Science and Health, Part A: Toxic/Hazardous Substances and Environmental Engineering, 2015

[63]	Contributions to understanding the high speed machining effects on aeronautic part surface integrity
	2015

[64]	Study of Cutting force and Surface Roughness in machining of Al alloy Hybrid Composite and Optimized using Response Surface Methodology
	Procedia Engineering, 2014

[65]	Electro Discharge Machining Of Hybrid Aluminum Metal Matrix Composite By Using Taguchi Method
	2014

[66]	Machining of Sic—metal matrix composite (MMC) by polycrystalline diamond (PCD) tools and effect on quality of surface by changing machining parameters
	2014

[67]	Fabrication of Aluminium Composite Using Stir Casting Process and Optimization of Machining Parameters
	Asian Review of Mechanical Engineering, 2014

[68]	Analysis of Looped Water Distribution Network with Different Head Loss Formula
	2014

[69]	Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651
	Materials, 2014

[70]	Hybrid aluminium metal matrix composite reinforced with SiC and TiB2
	2014

[71]	Effects of in-Situ TiC Reinforcements on the Machining Process Characteristics of Al+ 12Si Matrix
	2014

[72]	Исследование обрабатываемости точением дисперсно-упрочненных алюмоматричных композиционных материалов
	2014

[73]	Optimization of the machining parameters for surface roughness during turning of Al/SiC/Gr Hybrid MMC
	2013

[74]	Optimization of the machining parameters for surface roughness during turning of Al/SiC/Gr Hybrid MMC.
	2013

[75]	Optimization of Tool Shape and Size in EDM of Al Alloy Metal Matrix Composites.
	International Journal of Applied Engineering Research, 2013

[76]	Optimization of Surface Roughness and Vibration in Turning of Aluminum Alloy AA2024 Using Taguchi Technique
	International Journal of Mechanical, Industrial Science and Engineering, 2013

[77]	ANN Based Surface Roughness Prediction In Turning Of AA 6351
	KM Naidu, SR Rao - Citeseer, 2013

[78]	Characteristics of Aluminum Hybrid Composites
	International Journal of Materials and Metallurgical Engineering, 2012

[79]	ВЛИЯНИЕ РЕЖИМОВ АЛМАЗНОГО ТОЧЕНИЯ И СОСТАВА МЕТАЛЛОМАТРИЧНЫХ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ НА КАЧЕСТВЕННЫЕ …
	2012

[80]	A Review on Machining and Tribological Behaviors of Aluminium Hybrid Composites
	Procedia Engineering, 2012

[1]	Study on Machinability Behaviour and Simultaneous Optimisation of Multiple Responses Using Taguchi‐Based Grey Relational Analysis in End Milling of Aluminum Hybrid Composites Advances in Materials Science and Engineering, 2024 DOI:10.1155/2024/6620348

[2]	The comprehensive study for machining of metal matrix composites 1ST INTERNATIONAL CONFERENCE ON ADVANCES IN NOVEL MATERIALS: Towards Sustainable Future (ICAN-24), 2024 DOI:10.1063/5.0227955

[3]	Experimental Analysis of Machining Parameters In Turning of Aluminum 7075 Journal of Computers, Mechanical and Management, 2023 DOI:10.57159/gadl.jcmm.2.3.23061

[4]	Experimental Analysis of Machining Parameters In Turning of Aluminum 7075 Journal of Computers, Mechanical and Management, 2023 DOI:10.57159/gadl.jcmm.2.3.23061

[5]	Investigation of Surface Integrity Up-Milling Magnesium Oxide Particle Reinforced Wood-Based Composite International Journal of Precision Engineering and Manufacturing, 2023 DOI:10.1007/s12541-022-00737-9

[6]	Investigation of Surface Integrity Up-Milling Magnesium Oxide Particle Reinforced Wood-Based Composite International Journal of Precision Engineering and Manufacturing, 2023 DOI:10.1007/s12541-022-00737-9

[7]	Machinability Studies on Hybrid Aluminum Metal Matrix Composites IOP Conference Series: Materials Science and Engineering, 2022 DOI:10.1088/1757-899X/1258/1/012023

[8]	Bakır ve Silisyum İlavelerinin Al-25Zn Alaşımının CVD Al2O3 Kaplamalı Takımlarla Tornalanmasında İşlenebilirliğe Etkisinin İncelenmesi Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2020 DOI:10.29109/gujsc.618229

[9]	Bakır ve Silisyum İlavelerinin Al-25Zn Alaşımının CVD Al2O3 Kaplamalı Takımlarla Tornalanmasında İşlenebilirliğe Etkisinin İncelenmesi Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2020 DOI:10.29109/gujsc.618229

[10]	Experimental Investigation on Microstructural and Wear Behaviour of Dual Reinforced Particles (DRP) Aluminium Alloy Composites Advanced Materials Research, 2020 DOI:10.4028/www.scientific.net/AMR.1159.42

[11]	Influence of cutting speed and nose radius in the machining of Al-6061: FEM and experimental validation Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2019.10.142

[12]	Investigation of the tool wear, surface roughness, and chip formation in the machining of ZrO2-reinforced aluminum composites Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020 DOI:10.1007/s40430-020-02647-1

[13]	Study on Microstructure and EDAX Analysis of Al/SiC/Gr Hybrid Metal Matrix Composites Journal of Surface Science and Technology, 2019 DOI:10.18311/jsst/2019/20108

[14]	Investigation of cutting tool wear behaviors in machining of silicon carbide and magnesium oxide reinforced aluminum 2024 matrix composites Materials Research Express, 2019 DOI:10.1088/2053-1591/ab4093

[15]	Aluminium Composites Fabrication Technique and Effect of Improvement in Their Mechanical Properties – A Review Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.171

[16]	A review on the intensification of metal matrix composites and its nonconventional machining Science and Engineering of Composite Materials, 2018 DOI:10.1515/secm-2015-0287

[17]	Machining Investigation on Hybrid Metal Matrix Composites- A Review Materials Today: Proceedings, 2017 DOI:10.1016/j.matpr.2017.07.158

[18]	Manufacturing of aluminium nano hybrid composites: a state of review IOP Conference Series: Materials Science and Engineering, 2016 DOI:10.1088/1757-899X/149/1/012114

[19]	Aluminium Metal Matrix Composite – An Insight into Solid State and Liquid State Processes Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.766-767.234

[20]	Tool Wear Analysis of Al 6061 Reinforced with 10 wt% Al₂O₃ Using High Hardened Inserts Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.787.643

[21]	Studies on Machining Parameters While Milling Particle Reinforced Hybrid (Al6061/Al2O3/Gr) MMC Particulate Science and Technology, 2015 DOI:10.1080/02726351.2015.1025457

[22]	Hybrid Aluminium Metal Matrix Composite Reinforced with SiC and TiB2 Procedia Engineering, 2014 DOI:10.1016/j.proeng.2014.12.379

[23]	A Review on Machining and Tribological Behaviors of Aluminium Hybrid Composites Procedia Engineering, 2012 DOI:10.1016/j.proeng.2012.06.174

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies