F. Michelotti, A. Belardini, M. C. Larciprete, M. Bertolotti, A. Rousseau, A. Ratsimihety, G. Schoer and J. Muller, “Measurement of the Electro-Optic Properties of Poled Polymers at 1.55 Micron by Means of Sandwich Structures with Zinc Oxide Transparent Electrode,” Applied Physics Letters, Vol. 83, No. 22, 2003, pp. 4477-4480. doi:10.1063/1.1622798

has been cited by the following article:

• TITLE: AFM Analysis on Polymer Optical Micro-Resonators: Investigation on Quality Factor Origin

  AUTHORS: David Pluchon, Nolwenn Huby, Véronique Vié, Pascal Panizza, Bruno Bêche

  KEYWORDS: Optical Micro-Resonators; Quality Factor Origin; Atomic Force Microscopy;Surface Analysis; Scattering Loss

  JOURNAL NAME: Optics and Photonics Journal, Vol.3 No.4, August 8, 2013

  ABSTRACT: This paper deals with the surface analysis of spherical polymeric optical micro-resonators in order to correlate surface defects with optical characteristics. Atomic force microscopy was used on structures to determine surface quality, which is the main origin of optical scattering losses. Surface morphologies were numerically treated to enable a relevant investigation on surface parameters such as root mean square (RMS) roughness (30.1 +/- 3.0 nm) or correlation length (few microns) necessary to express optical quality factors. A statistical analysis was conducted for calibration of these parameters as a function of cavities’ diameter. Results are in perfect agreement with spectral analyses performed in parallel on others structures. This comparison highlights the main role of scattering losses on quality factor origin.