A. Abdipour and A. Pacaud, “Complete Sliced Model of Microwave FETs and Comparison with Lumped Model and Experimental Results,” IEEE Transactions on Microwave Theory and Techniques, Vol. 44, No. 1, 1996, pp. 4-9. doi:10.1109/22.481378

has been cited by the following article:

• TITLE: Efficient Time-Domain Signal and Noise FET Models for Millimetre-Wave Applications

  AUTHORS: Shahrooz Asadi, Mustapha C. E. Yagoub

  KEYWORDS: Distributed Model; FDTD; Noise Correlation Matrix; FET

  JOURNAL NAME: Journal of Electromagnetic Analysis and Applications, Vol.5 No.1, January 29, 2013

  ABSTRACT: Based on the active coupled line concept, a novel approach for efficient signal and noise modeling of millimeter-wave field-effect transistors is proposed. The distributed model considers the effect of wave propagation along the device electrodes, which can significantly affect the device performance especially in the millimetre-wave range. By solving the multi-conductor transmission line equations using the Finite-Difference Time-Domain technique, the proposed procedure can accurately determine the signal and noise performance of the transistor. In order to demonstrate the proposed FET model accuracy, a distributed low-noise amplifier was designed and tested. A model selection is often a trade-off between procedure complexity and response accuracy. Using the proposed distributed model versus the circuit-based model will allow increasing the model frequency range.