C. Anastasiadis, I. Stavrakas, D. Triantis, A. Kyriazopoulos and K. Ninos, “Rock Damage Estimation with Dielec- tric Loss (tanδ) Measurements,” International Journal of Microstructure and Materials Properties, Vol. 1, No. 3-4, 2006, pp. 421-429.

has been cited by the following article:

• TITLE: Using AC Conductivity Measurements to Study the Influence of Mechanical Stress on the Strength of Geomaterials

  AUTHORS: Ilias Stavrakas, Kostantinos Moutzouris, Kostantinos Ninos, Nikos Mitritsakis, Zacharias Agioutantis, Dimos Triantis

  KEYWORDS: AC Conductivity Measurements; Marble; Mechanical Load

  JOURNAL NAME: Open Journal of Applied Sciences, Vol.2 No.2, June 27, 2012

  ABSTRACT: The Dielectric Spectroscopy technique is a tool that can be used to provide information regarding the physical and chemical properties of materials. In this work Dielectric Spectroscopy (DS) measurements were conducted on marble specimens that were previously subjected to uniaxial compressive stress up to fracture in order to investigate the influence of the mechanical stress on the dielectric properties of the specimens. Specifically, the ac conductivity (σac) was measured when an ac electric field in the frequency range 1 kHz - 1 MHz was applied upon dry and saturated specimens which were subjected successively to higher levels of mechanical stress. The experimental results indicate that there are systematic variations in the values of the ac conductivity after each stress application at a higher stress level. Such variations become more intense at higher stress values and can be used to indicate the upcoming fracture since significant increase of conductivity is recorded when microcracks formations appear and propagate in the sample bulk.