Gil, A.G., Wu, Z., Chadwick, D. and Li, K. (2015) Ni/SBA-15 Catalysts for Combined Steam Methane Reforming and Water Gas Shift-Prepared for Use in Catalytic Membrane Reactors. Applied Catalysis A: General, 506, 188-196.
http://dx.doi.org/10.1016/j.apcata.2015.09.009

has been cited by the following article:

• TITLE: A Simulation Study of the Steam Reforming of Methaneina Fixed-Bed Reactor

  AUTHORS: Fernando Antôniode Araújo Silva, Kenia Carvalho Mendes, Jornandes Dias da Silva

  KEYWORDS: Simulation, Methane, Modelling, Steam Reforming, Fixed-Bed Reactor

  JOURNAL NAME: Engineering, Vol.8 No.4, April 29, 2016

  ABSTRACT: In this work a one-dimensional mathematical model was developed to simulate methane conversion and hydrogen yield in a fixed-bed reactor filled with catalyst particles. For the reason that reforming reactions are sorely endothermic process, the heat is supplied to the reactor through electrical heating. The reforming reactions have been investigated from a modelling view point considering the effect of different temperatures ranging from 500℃ and 977℃ on the conversion of methane and hydrogen yield. Simulation results show that the steam reforming of methane in a fixed-bed reactor can efficiently store high temperature end thermal energy. When the operating temperature is increased to 977℃, the conversion of methane is 97.48% and the hydrogen yield is 2.2408. As a conclusion, the maximum thermochemical efficiency will be obtained under optimal operating temperature (977℃) and the steam/methane (3.86) ratio.