Morello, A., Angenent, W.G.J., Frossati, G. and Jongh, L.J. (2005) Automated and Versatile SQUID Magnetometer for the Measurement of Materials Properties at Millikelvin Temperatures. Review of Scientific Instruments, 76, Article ID: 023902.
http://dx.doi.org/10.1063/1.1841831

has been cited by the following article:

• TITLE: A Practical and Automated Hall Magnetometer for Characterization of Magnetic Materials

  AUTHORS: Jefferson F. D. F. Araujo, Joao M. B. Pereira

  KEYWORDS: Practical Magnetometer, Hall Sensor, Characterization of Magnetic Materials

  JOURNAL NAME: Modern Instrumentation, Vol.4 No.4, September 29, 2015

  ABSTRACT: A versatile Hall magnetometer has been developed, manufactured, calibrated, and turned operational for measurements of the magnetic properties of bulk materials and magnetic micro- and nanoparticles. The magnetometer was constructed from the combination of various equipments, which was usually available in most laboratories, such as a Hall effect sensor, an electromagnet, a current source, and a linear actuator. The achieved sensitivity to the magnetic moment was approximately 10-8 Am2. The results were compared to measurements performed with commercial vibrating-sample magnetometers and superconductor quantum interference devices (SQUID) and showed errors of around 1.7% and a standard deviation of 1.2% in relation to measures themselves. The constructed Hall magnetometer records a magnetic hysteresis loop of up to 1.2 T at room temperature. This magnetometer is cost-effective, versatile, and suitable for research.