Attivissimo, F., Adamo, F., Carullo, A., Lanzolla, A.M.L., Spertino, F. and Vallan, A. (2013) On the Performance of the Double-Diode Model in Estimating the Maximum Power Point for Different Photovoltaic Technologies. Measurement, 46, 3549-3559.
http://dx.doi.org/10.1016/j.measurement.2013.06.032

has been cited by the following article:

• TITLE: Evaluation and Validation of Equivalent Five-Parameter Model Performance for Photovoltaic Panels Using Only Reference Data

  AUTHORS: Nouar Aoun, Rachid Chenni, Boukheit Nahman, Kada Bouchouicha

  KEYWORDS: Photovoltaic, Five-Parameters, Mono-Crystalline, Relative Error, Ideality Factor

  JOURNAL NAME: Energy and Power Engineering, Vol.6 No.9, September 10, 2014

  ABSTRACT: This paper presents the modeling of electrical I-V verification of photovoltaic modules using five-parameter models based on the minimum usage of input data, which are usually provided by manufacturer’s datasheet. However, we vary them with a step of 10-4, the ideality factor between 0.0 and 4 for each iteration in order to choose the value, which gives a minimal relative error of the maximum power point. Moreover, when is known, the other four parameters (i.e., Rs, I0, Iph and Rsh) are known. Finally, the effectiveness of this approach is then validated through comparison of the experimental results data under outdoor weather conditions.