Z. L. Khatib, G. J. Hirasaki and A. H. Falls, “Effects of Capillary Pressure on Coalescence and Phase Mobilities in Foams Flowing Through Porous Media,” SPE Reservoir Engineering, Vol. 3, No. 3, 1988, pp. 919-926.
http://dx.doi.org/10.2118/15442-PA

has been cited by the following article:

• TITLE: Injection Scheme Optimization of Foam Profile Control on Block S103

  AUTHORS: Hongjun Yin, Chuan Liu, Meinan Wang

  KEYWORDS: Foam Profile Control; Numerical Simulation; Injection Pattern; Injection Cycle

  JOURNAL NAME: Engineering, Vol.6 No.1, January 13, 2014

  ABSTRACT: Facing problems with oil production decreasing quickly and water content increasing gradually in S103 well area, the Foam Profile Control was studied on the basis of its confirmed agent formula. The facies-controlled geological model of S103 well area was generated using random model based on Petrel software and using numerical simulation based on CMG software. Gas liquid alternating injection pattern was optimized as the optimal solution through the simulation optimization. Two months are optimized as the optimal solution through the simulation optimization. The cumulative oil production is 0.933 × 107 kg which is higher than the value of subsequent water flooding and the other three. Finally, it reaches the goals of slowing down the production decline and controlling the water rising.