Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"Characteristic and Performance of Elementary Hemp Fibre"
written by Dasong Dai, Mizi Fan,
published by Materials Sciences and Applications, Vol.1 No.6, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Copper Stimulation of Tetrahydrocannabinol and Cannabidiol Production in Hemp (Cannabis sativa L.) Is Copper-Type, Dose, and Cultivar Dependent
Journal of Agricultural …, 2024
[2] Examination of compressive and flexural behaviors of acrylonitrile-butadiene-styrene filled with hemp fiber particles
Journal of Thermoplastic …, 2024
[3] Novel hemp biomass-derived activated carbon as cathode material for aqueous zinc-ion hybrid supercapacitors: Synthesis, characterization, and electrochemical …
Journal of Energy Storage, 2024
[4] Effects of chemical treatment and gamma-ray irradiation on the structure-properties of sunn hemp and okra hessian cloth reinforced high-density polyethylene …
Journal of …, 2024
[5] Characterization of a novel natural cellulosic fiber obtained from the fruit of Tipuana tipu
Biomass Conversion and …, 2024
[6] DES-like mixtures based on choline chloride and lactic acid for fractionation of hemp fibers
Journal of Ionic …, 2024
[7] Production of reducing sugars from leavescrown of pineapple, corn stalk and rose stalk using phosphoric acid: Kinetics and thermodynamics
Alamo, D Gutiérrez-López… - REVISTA MEXICANA …, 2024
[8] Structure of bacterial nanocellulose membrane reinforced by zinc oxide nanoparticles
AIP Conference …, 2024
[9] Investigation of the use of hemp fibers in recycling spinning
Acta Scientiarum-Technology, 2023
[10] STUDY OF INTEGRATION, DISTRIBUTION AND DEGRADATION OF SUGARCANE BAGASSE FIBER AS PARTIAL REPLACEMENT FOR FINE AGGREGATE IN …
Cellulose Chemistry …, 2023
[11] Thermal Response of Biocarbon-Filled Hemp Fiber-Reinforced Bioepoxy Composites
ACS omega, 2023
[12] The Interaction Effect of the Design Parameters on the Water Absorption of the Hemp-Reinforced Biocarbon-Filled Bio-Epoxy Composites
International Journal of Molecular …, 2023
[13] Nano-Biocomposite Materials Obtained from Laser Ablation of Hemp Stalks for Medical Applications and Potential Component in New Solar Cells
International Journal of …, 2023
[14] Physico-mechanical, thermo-mechanical, and biodegradation properties of unidirectional green-composites from nettle (Girardinia diversifolia) yarn preform and poly …
European Polymer Journal, 2023
[15] Extraction and characterization of novel lignocellulosic fibers from Centaurea hyalolepis plant as a potential reinforcement for composite materials
Journal of …, 2023
[16] Unleashing the potential of bio-based concrete: Investigating its long-term mechanical strength and drying shrinkage in real climatic environments
Cement and Concrete Composites, 2023
[17] A robust process to produce lignocellulosic nanofibers from corn Stover, reed canary grass, and industrial hemp
Polymers, 2023
[18] Influence of Chemical Treatments on the Physical and Mechanical Properties of Furcraea Foetida Fiber for Polymer Reinforcement Applications
Journal of Natural …, 2023
[19] Preparation of Cellulose Nanofibers from Agricultural Waste Hemp by Mechanical Defibrillation
Key Engineering …, 2023
[20] Hemp-based biocarbon-filled biopolymer composites: Its preparation, characterization, and optimization
2023
[21] Estudo de fibras de base natural para aplicação na indústria têxtil
2023
[22] Študij biorazgradnje zaščitnih mask (covid-19) na osnovi respirometrijskih meritev v kompostu
2023
[23] UNAM–Dirección General de Bibliotecas Tesis Digitales Restricciones de uso
2023
[24] Natural fibre reinforced vegetable-oil based polyurethane composites: A review
Journal of Polymer …, 2023
[25] Cellulose-supported bioadsorbent from natural hemp fiber for removal of anionic dyes from aqueous solution
International Journal of Biological Macromolecules, 2023
[26] Thermal steam methane reforming over bimetal-loaded hemp-derived activated carbon-based catalyst for hydrogen production
Research on Chemical …, 2023
[27] A unique approach for in-situ monitoring of the THCA decarboxylation reaction in solid state
… Acta Part A: Molecular …, 2022
[28] Characterization Studies on Novel Cellulosic Fiber Obtained from the Bark of Madhuca Longifolia Tree
Journal of Natural …, 2022
[29] Obtención de fibras de celulosa a partir del líber de la planta cáñamo industrial (Cannabis Sativa L.) mediante tratamiento químico para uso textil.
2022
[30] Enhanced mechanical properties of potassium permanganate treated areca sheath fibre epoxy composite
Materials Today: Proceedings, 2022
[31] Biosorption of methyl orange from aqueous solution with hemp waste, investigation of isotherm, kinetic and thermodynamic studies and modeling using multigene …
Chemical Papers, 2022
[32] Synergistic effect of alkali and silane treatment on mechanical, flammability, and thermal degradation of hemp fiber/epoxy composite
Polymer Composites, 2022
[33] Accelerated Aging Effect in Physical and Thermo-mechanical Properties of Maize Starch Biocomposites Reinforced with Agave Salmiana Fibers from Different Leaf …
Fibers and …, 2022
[34] The morphological and anatomical variability of the stems of an industrial hemp collection and the properties of its fibres
Heliyon, 2022
[35] Hemp-Based Materials for Applications in Wastewater Treatment by Biosorption-Oriented Processes: A Review
Crini, V Placet, C Bradu… - Cannabis/Hemp for …, 2022
[36] Influence of alkalinity on self-treatment process of natural fiber and properties of its geopolymeric composites
… and Building Materials, 2022
[37] Sustainable, Tree-Free, PLA Coated, Biodegradable, Barrier Papers from Kendir (Turkish Hemp)
Journal of Natural …, 2022
[38] Effect of Alkaline Treatment and Graphene Oxide Coating on Thermal and Chemical Properties of Hemp (Cannabis Sativa L.) Fibers
Journal of Natural …, 2022
[39] Characterisation of Elementary Kenaf Fibres Extracted Using HNO3 and H2O2/CH3COOH
Fibers, 2022
[40] Thermal and mechanical characterization of adobes bio-sourced with Pennisetum setaceum fibers and an application for modern buildings
… and Building Materials, 2022
[41] Investigation on Physicochemical, Thermal and Mechanical Properties of New Cellulosic Fiber Obtained from the Stem of Tecoma Stans
Journal of Natural …, 2022
[42] Dilute Acid Pretreatment of Wheat Stubble Agro-Residues to Eliminate Non-Process Components Meant for Papermaking and its Impact on Mechanical Strength …
Asian Journal of Science and Applied Technology, 2022
[43] Nanocellulose Production from Low-Cost Agricultural Residues: Process Development, Economic Assessment, and Process Robustness
2022
[44] Behaviour and design of natural fibre reinforced concrete
2022
[45] Structural and Diagnostic Investigations on Materials and Plasters of the Biblioteca Umanistica of the University of Florence
… Florence Heri-Tech: the …, 2022
[46] Suitability of surface-treated flax and hemp fibers for concrete reinforcement
Fibers, 2022
[47] Water Down Acid Pretreatment of Wheat Stubble Agro-residues to Eliminate Non-process Components Meant for Papermaking and Its Impact on Mechanical Strength …
2022
[48] ANALYTICAL CHARACTERIZATION OF BIBLE AND TEXTILES ARTIFACTS FROM SINOPE BALATLAR CHURCH EXCAVATIONS FOR CONSERVATION …
Mediterranean …, 2022
[49] Design and test of bioinspired specimens by using tensile testing machine and Digital Image Correlation
2021
[50] Properties of Hemp Fibre Reinforced Polymer Composites
Vegetable Fiber Composites and their …, 2021
[51] The influence of different chemical treatments on the mechanical properties of hemp fibre-filled polymer composites
2021
[52] Characterization of Sida acuta fiber and its polymer composites with effect of fly ash
Journal of Natural …, 2021
[53] Physicochemical and Thermal Properties of New Cellulosic Fiber Obtained from the Stem of Markhamia lutea
Journal of Natural …, 2021
[54] Use of Chènevotte, a valuable co-product of industrial hemp fiber, as adsorbent for pollutant removal. Part I: chemical, microscopic, spectroscopic and …
Crini, X Gabrion… - Molecules, 2021
[55] Characterization of flax and hemp using spectrometric methods
Applied Sciences, 2021
[56] Vibrational Spectroscopic Analyses and Imaging of the Early Middle Ages Hemp Bast Fibres Recovered from Lake Sediments
2021
[57] The Utilization of Water Hyacinth for Biogas Production in a Plug Flow Anaerobic Digester
2021
[58] Potential Use of Alternative Binder to Improve Durability of Hemp Concrete Under Cyclic Wetting/Drying Aging
SSRN Electronic Journal, 2021
[59] Bacterial Cellulose Nanocomposites with Lignin: Fabrication and Characterization of Structure, Mechanical & Thermal Properties
2021
[60] KENEVİR LİFLERİNİN ELDESİ, ÖZELLİKLERİ VE KOMPOZİT UYGULAMA ALANLARI
Bart?n University International Journal of Natural and Applied Sciences, 2021
[61] Influence of acrylic latex and pre-treated hemp fibers on cement based mortar properties
2021
[62] Sphere-like and flake-like ZnO immobilized on pineapple leaf fibers as easy-to-recover photocatalyst for the degradation of congo red
2021
[63] Hydrothermal production of high-molecular weight hemicellulose-pectin, free sugars and residual cellulose pulp from discarded carrots
2021
[64] Overview of nanocellulose as additives in paper processing and paper products
2021
[65] Sustainable process for the production of cellulose by an Acetobacter pasteurianus RSV-4 (MTCC 25117) on whey medium
2021
[66] Extraction and characterization of indigenous Ethiopian castor oil bast fibre
2021
[67] A Comparative Study of Ni (II) Removal from Aqueous Solutions on Ca-Alginate Beads and Alginate-Impregnated Hemp Fibers
2021
[68] PECTIN QUANTIFICATION FROM CELLULOSIC/LIGNOCELLULOSIC RAW MATERIALS BY FT-IR ATR ANALYSIS
2020
[69] Characterization of Urena lobata Fibers after Alkaline Treatment for Use in Polymer Composites
2020
[70] Mechanical, thermal, hygroscopic and acoustic properties of bio-aggregates–lime and alkali-activated insulating composite materials: A review of current status and …
2020
[71] Hemp Fibers for Wastewater Treatment
2020
[72] Physicomechanical Properties of Treated Oil Palm-Broom Fibers for Cementitious Composites
2020
[73] Rheological, tensile, and thermal properties of poly (butylene succinate) composites filled with two types of cellulose (kenaf cellulose fiber and commercial cellulose)
2020
[74] Biodegradable Copolyester-Based Natural Fibers–Polymer Composites: Morphological, Mechanical, and Degradation Behavior
2020
[75] Effect of the interplay of composition and environmental humidity on the nanomechanical properties of hemp fibers
2020
[76] Effect of self-treatment process on properties of natural fiber-reinforced geopolymer composites
2020
[77] Investigation on the tensile and flexural behavior of coconut inflorescence fiber reinforced unsaturated polyester resin composites
2020
[78] Physicochemical characterisation of bio-based insulation to explain their hygrothermal behaviour
2020
[79] Hemp Fiber Reinforced Geopolymer Composites: Effects of NaOH Concentration on Fiber Pre-Treatment Process
2020
[80] Biocomposites based on plasticized starch: thermal, mechanical and morphological characterization
2020
[81] Chemical and mineral characterization of Romanian book paper materials (XVII–XIXth century)
2020
[82] Enhanced room-temperature NO 2 sensing properties of biomorphic hierarchical mixed phase WO 3
Nanoscale, 2020
[83] Impact of a microwave treatment of hemp fibers on the hemp/cement interaction
2020
[84] Optimising Moisture Transport in Bio-Based, Earth and Natural Hydraulic Lime Mortars Using Hygrothermal and Chemical Characteristics
2020
[85] High stiffness, high strength and high toughness green composites based on poly (hydroxybutyrate-co-valerate)(PHBV)
2019
[86] Characterization of Manmade and Recycled Cellulosic Fibers for Their Application in Building Materials
2019
[87] The application of hemp (Cannabis sativa L.) for a green economy: a review
2019
[88] Utilization of industrial and hazardous waste materials to formulate energy-efficient hygrothermal bio-composites
2019
[89] Effect of Alkali Treatment on Mechanical and Morphological Properties of Pineapple Leaf Fibre/Polyester Composites
2019
[90] Thermo-physico-chemical and statistical mechanical properties of Washingtonian filifera new lignocellulosic fiber
2019
[91] Development of a sustainable and innovant hygrothermal bio-composite featuring the enhanced mechanical properties
2019
[92] Beating of hemp bast fibres: an examination of a hydro-mechanical treatment on chemical, structural, and nanomechanical property evolutions
2019
[93] Assessment of natural cellulosic fibers derived from Senna auriculata for making light weight industrial biocomposites
2019
[94] Extraction and nutritional properties of protein derived from rice (Oryza sativa) based distillery byproducts: a potential substrate for food formulation
2019
[95] Study on the multi-scale structure and interfacial properties of plant fiber reinforced composites
2019
[96] Structural and thermal characterization of different types of cellulosic fibers
2019
[97] Determinación del efecto de la adición del bagazo de ca?a en la reacción álcali-hidrólisis, sobre las propiedades mecánicas y electroquímicas del sistema concreto-acero de refuerzo
Thesis, 2019
[98] Extraction and Characterization of Lignocellulosic Fibers from Girardinia Bullosa (Steudel) Wedd. (Ethiopian Kusha Plant)
Journal of Natural Fibers, 2018
[99] Estudio del efecto del contenido y tamaño de partículas de la testa de la semilla del fruto de pich (Enterolobium cyclocarpum) sobre las propiedades de un …
2018
[100] Degradation behavior and kinetics of sisal fiber in pore solutions of sustainable cementitious composite containing metakaolin
Polymer Degradation and Stability, 2018
[101] Development of distinct cell wall layers both in primary and secondary phloem fibers of hemp (Cannabis sativa L.)
Industrial Crops and Products, 2018
[102] Hemp fibers (Cannabis sativa) impregnated by Ca-alginate gel as a novel biosorbent for the removal of Pb (II) and Zn (II) ions
2018
[103] Caracterización térmica, mecánica y morfológica de fibras naturales colombianas con potencial como refuerzo de biocompuestos
2018
[104] Ferromagnetic iron oxide–cellulose nanocomposites prepared by ultrasonication
Polymer Chemistry, 2018
[105] Doctorat en
2018
[106] Contribution à l'étude de la durabilité et les performances des bétons autoplaçants (fibres végétales, milieu agressif, formulation, modélisation
2018
[107] MOLECULAR CHARACTERIZATION OF MYXOMYCETES AND FUNGI COLONIZING HEMP HURDS IN WATER ENVIRONMENT
Asian Jr. of Microbiol. Biotech. Env. Sc., 2018
[108] Extraction and characterization of lignocellulosic fibers from girardinia bullosa (Steudel) wedd.(Ethiopian Kusha Plant)
2018
[109] Ash content vs. the economics of using wood chips for energy: Model based on data from Central Europe
2017
[110] Toward the cottonisation of hemp fibers by steam explosion-Part 1: Defibration and morphological
2017
[111] Interactions between volatile organic compounds and natural building materials
2017
[112] CONVERSION OF CHITIN ISOLATED FROM FRESH-WATER PRAWNS TO CHITOSAN AND ITS CHARACTERIZATION
Polymers Research Journal, 2017
[113] Production and characterization of bacterial cellulose before and after enzymatic hydrolysis
African Journal of Biotechnology, 2017
[114] An Efficient Method of Bio-Chemical Combined Treatment for Obtaining High-Quality Hemp Fiber
2017
[115] Toward the cottonization of hemp fibers by steam explosion–Part 1: defibration and morphological characterization
Textile Research Journal, 2017
[116] Degradation of natural fiber in ternary blended cement composites containing metakaolin and montmorillonite
Corrosion Science, 2017
[117] Forensic identification of bast fibres
2017
[118] Thermal, mechanical, and morphological characterization of Colombian natural fibers as potential reinforcement for biocomposites
Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales?, 2017
[119] Development of Hemp Fibers: The Key Components of Hemp Plastic Composites
Natural and Artificial Fiber-Reinforced Composites as Renewable Sources, 2017
[120] Fire performance of natural fibre composites in construction
Advanced High Strength Natural Fibre Composites in Construction, 2017
[121] Targeted pre-treatment of hemp bast fibres for optimal performance in biocomposite materials: A review
Industrial Crops and Products, 2017
[122] Selective Depolymerization of Industrial Hemp and its Effects on Thermal Resistivity
2017
[123] CONVERSION OF CHITIN ISOLATED FROM FRESH-WATER PRAWNS TO CHITOSAN AND ITS CHARACTERIZATION.
Polymers Research …, 2017
[124] Theoretical analysis and FTIR of cellulose nanowhiskers/Poly (Butyl Acrylate)
2016
[125] A probabilistic model of the tensile strength of a UD flax–fabric‐reinforced polymer composite
Polymer composites, 2016
[126] OBTENCIÓN DE CELULOSA A PARTIR DE BAGAZO DE CAÑA DE AZUCAR (Saccharum spp.)
2016
[127] Cannabis sativa (Cannabaceae) in ancient clay plaster of Ellora Caves, India
2016
[128] Mechanical and thermal characterization of polyester composite containing treated wood flour from Palm oil biomass
Polymer composites, 2016
[129] Theoretical analysis and FTIR of cellulose nanowhiskers/Poly (ButylAcrylate)
2016
[130] OBTENCIÓN DE CELULOSA A PARTIR DE BAGAZO DE CAÑA DE AZUCAR (Saccharum spp.).
Agroproductividad, 2016
[131] Evaluation of the retting process as a pre-treatment of vegetable fibers for the preparation of high-performance polymer biocomposites
Industrial Crops and Products, 2016
[132] Utilization of rice husk ash in green natural fiber-reinforced cement composites: Mitigating degradation of sisal fiber
Cement and Concrete Research, 2016
[133] Correlation between hydration of cement and durability of natural fiber-reinforced cement composites
Corrosion Science, 2016
[134] Obtención de celulosa a partir de bagazo de caña de azúcar (Saccharum spp.)
2016
[135] OBTENCION DE CELULOSA A PARTIR DE BAGAZO DE CANA DE AZUCAR (Saccharum spp.).
Martínez, GI Bolio-López, L Veleva… - …, 2016
[136] Properties of bio-based insulation materials and their potential impact on indoor air quality
2015
[137] Wettability of Nanostructured Surfaces
2015
[138] Effects of Dilute Acid Pretreatment on Chemical and Physical Properties of Kenaf Biomass
Journal of Natural Fibers, 2015
[139] Low-cost hemp biomaterials for nickel ions removal from aqueous solutions
Journal of Molecular Liquids, 2015
[140] Modeling the tensile strength of hemp fibers and short-hemp-fiber reinforced composites
Natural Filler and Fibre Composites: Development and Characterisation, 2015
[141] Degradation mechanisms of natural fiber in the matrix of cement composites
Cement and Concrete Research, 2015
[142] Ground Hemp Fibers as Filler/Reinforcement for Thermoplastic Biocomposites
Advances in Materials Science and Engineering, 2015
[143] Effects of resin inside fiber lumen on the mechanical properties of sisal fiber reinforced composites
Composites Science and Technology, 2015
[144] Preparation of Durian Skin Nanofibre (DSNF) and Its Effect on the Properties of Polylactic Acid (PLA) Biocomposites
2015
[145] OBTENCIÓN Y CARACTERIZACIÓN DE CELULOSA A PARTIR DEL FRUTO DE LA ESPECIE Ceiba pentandra (L.) Gaertn (KAPOK)
2015
[146] Elementary kenaf fibre extraction
2015
[147] Injection moulded short hemp fibre polypropylene composites
2015
[148] Determination of properties of Althaea officinalis L.(Marshmallow) fibres as a potential plant fibre in polymeric composite materials
Composites Part B: Engineering, 2014
[149] Durability of Cement Composites Reinforced with Sisal Fiber
ProQuest Dissertations Publishing, 2014
[150] Caractérisation du comportement hygro-mécanique des fibres liberiennes élémentaires issues du chanvre
Thèse, 2014
[151] Properties Characterization of Chemically Modified Hemp Hurds
Materials, 2014
[152] Effect of Surface Treatment and Fiber Orientation on the Tensile and Morphological Properties of Banana Stem Fiber Reinforced Natural Rubber Composite
Journal of Minerals and Materials Characterization and Engineering , 2014
[153] Degradation rate of natural fiber in cement composites exposed to various accelerated aging environment conditions
Corrosion Science, 2014
[154] Multi-scale analysis of the structure and mechanical performance of woody hemp core and the dependence on the sampling location
Industrial Crops and Products , 2014
[155] Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibres isolated from waste plant biomass such as hemp
Composites Part B: Engineering, 2014
[156] Interacción nanowhiskas de celulosa/poli (acrilato de butilo)
2014
[157] WHISKERS DE CELULOSA A PARTIR DE RESIDUOS AGROINDUSTRIALES DE BANANO: OBTENCI ?ON Y CARACTERIZACI ?ON
Revista Mexicana de Ingeniería Química, 2013
[158] Synthetic fabrics coated with zinc oxide nanoparticles by electroless deposition: Structural characterization and wetting properties
Journal of Polymer Science Part B: Polymer Physics, 2013
[159] Moisture Absorption and Desorption in Flax and Hemp Fibres and Yarns
FIBRES & TEXTILES in Eastern Europe, 2013
[160] Strength-length scaling of elementary hemp fibers
Carbohydrate polymers, 2013
[161] Lightweight Composites Based on Cellulosic Material
International Journal of Modern Manufacturing Technologies, 2013
[162] A review of bast fibres and their composites: Part 3–Modelling
Composites Part A: Applied Science and Manufacturing , 2013
[163] Extraction and properties of Ferula communis(chakshir) fibers as novel reinforcement for composites materials
Composites Part B: Engineering, 2013
[164] Green modification of natural fibres with nanocellulose
RSC Advances, 2013
[165] Influence of alkali treatment on the structure and properties of hemp fibers
Fibers and Polymers, 2013
[166] Analysis of the hemp fiber mechanical properties and their scattering (Fedora 17)
Industrial Crops and Products , 2013
[167] Damage characterisation on PP-hemp/aluminium fibre–metal laminates using acoustic emission
Journal of Composite Materials, 2013
[168] Extraction and properties of Ferula communis (chakshir) fibers as novel reinforcement for composites materials
Composites Part B: Engineering, 2013
[169] Comparison of Spanish broom (Spartium junceum L.) and flax (Linum usitatissimum) fibre
Textile Research Journal, 2012
[170] Preparation and characterization of physical properties of durian skin fibers biocomposite
Advanced Materials Research , 2012
[171] Diameter dependence of the apparent tensile modulus of hemp fibres: A morphological, structural or ultrastructural effect?
Composites Part A: Applied Science and Manufacturing, 2012
[172] In situ observations of microscale damage evolution in unidirectional natural fibre composites
Composites Part A: Applied Science and Manufacturing, 2012
[173] Chemical modification of hemp shives and their characterization
Procedia Engineering , 2012
[174] Mechanical damage characteristics of elementary hemp fibers and scale effect of fiber strength
High Performance Structures and Materials VI, 2012
[175] Characterization on Surface Modification of Kenaf Biomass via Microbial Fermentation
Advanced Materials Research , 2012
[176] Influence of Twisting Degree and Number of Cords on the Structure of Silk
Materials Sciences and Applications, 2011
[177] Whiskers de celulosa a partir de residuos agroindustriales de banano: Obtención y caracterización
Revista mexicana de ingeniería química, 2011
[178] OBTENCIÓN DE CELULOSA A PARTIR DE RESIDUOS AGROINDUSTRIALES DE CAÑA DE AZUCAR(Saccharumofficinarum L.)
2011
[179] WHISKERS DE CELULOSA A PARTIR DE RESIDUOS AGROINDUSTRIALES DE BANANO: OBTENCION Y CARACTERIZACI ′ ON
Revista Mexicana de Ingeniería Química, 2011
[180] Cellulose whiskers from agro-industrial banana wastes: Isolation and characterization
2011
[181] SAN NICOLÁS DE HIDALGO
2010
[182] Characterization and performance of elementary hemp fibres: factors influencing tensile strength
BioResources, 2010
[183] Contribution à l'étude de la durabilité et les performances des bétons autoplaçants (fibres végétales, milieu agressif, formulation, modélisation.
[184] Determinación del efecto de la adición del bagazo de caña en la reacción álcali-hidrólisis, sobre las propiedades mecánicas y electroquímicas del …
[185] Fiber Properties of Some Non-Woods as Possible Reinforcement in Composite Making
[186] STUDY OF INTEGRATION, DISTRIBUTION AND DEGRADATION OF SUGARCANE BAGASSE FIBER AS PARTIAL REPLACEMENT FOR FINE AGGREGATE …
Free SCIRP Newsletters
Copyright © 2006-2026 Scientific Research Publishing Inc. All Rights Reserved.
Top