Materials Sciences and Applications

Volume 1, Issue 6 (December 2010)

ISSN Print: 2153-117X   ISSN Online: 2153-1188

Google-based Impact Factor: 1.34  Citations  

Characteristic and Performance of Elementary Hemp Fibre

HTML  Download Download as PDF (Size: 568KB)  PP. 336-342  
DOI: 10.4236/msa.2010.16049    8,824 Downloads   15,794 Views  Citations
Author(s)

Affiliation(s)

.

ABSTRACT

This paper presents systematic and improved methodologies to characterize the surface and fracture of elementary hemp fibres by Field Emission Scanning Microscope (FE-SEM), determine the Microfibril Angles (MFA) by an advanced microscopy technology and examine the crystallinity by X-Ray Diffraction (XRD) and Fourier Transform Infrared (FTIR). The results showed that 1) There existed various deformations/defects in elementary hemp fibres, showing four types of deformations, namely kink bands, dislocations, nodes and slip planes. The crack on the surface of elementary fibres was the initial breaking point under stress; 2) Under tension the primary wall and secondary wall of hemp fibres showed different deformation and breaking behaviour. The crack initiated in a weak point of primary wall and subsequently propagated along radial direction from S1 to S2 layers; 3) The average MFA for the broken regions of S2 layer was 6.16? compared to 2.65? for the normal hemp fibres and the breaking of hemp fibres occurred at the points where had the biggest MFA; 4) The average MFA was 2.65? for S2 layer and 80.35? for S1 layer; 5) the Crystallinity Index (CI) determined by XRD and FTIR was very similar, showing the lattice parameters of the hemp fibres tested a = 6.97 Å, b = 6.26 Å, c = 11.88 Å and γ = 97.21?, and the ratio of 1423 to 896 cm-1 was found more suitable for CI evaluation for hemp fibres.

Share and Cite:

D. Dai and M. Fan, "Characteristic and Performance of Elementary Hemp Fibre," Materials Sciences and Applications, Vol. 1 No. 6, 2010, pp. 336-342. doi: 10.4236/msa.2010.16049.

Cited by

[1] Copper Stimulation of Tetrahydrocannabinol and Cannabidiol Production in Hemp (Cannabis sativa L.) Is Copper-Type, Dose, and Cultivar Dependent
Journal of Agricultural …, 2024
[2] Examination of compressive and flexural behaviors of acrylonitrile-butadiene-styrene filled with hemp fiber particles
Journal of Thermoplastic …, 2024
[3] Novel hemp biomass-derived activated carbon as cathode material for aqueous zinc-ion hybrid supercapacitors: Synthesis, characterization, and electrochemical …
Journal of Energy Storage, 2024
[4] Effects of chemical treatment and gamma-ray irradiation on the structure-properties of sunn hemp and okra hessian cloth reinforced high-density polyethylene …
Journal of …, 2024
[5] Characterization of a novel natural cellulosic fiber obtained from the fruit of Tipuana tipu
Biomass Conversion and …, 2024
[6] DES-like mixtures based on choline chloride and lactic acid for fractionation of hemp fibers
Journal of Ionic …, 2024
[7] Production of reducing sugars from leavescrown of pineapple, corn stalk and rose stalk using phosphoric acid: Kinetics and thermodynamics
Alamo, D Gutiérrez-López… - REVISTA MEXICANA …, 2024
[8] Structure of bacterial nanocellulose membrane reinforced by zinc oxide nanoparticles
AIP Conference …, 2024
[9] Investigation of the use of hemp fibers in recycling spinning
Acta Scientiarum-Technology, 2023
[10] STUDY OF INTEGRATION, DISTRIBUTION AND DEGRADATION OF SUGARCANE BAGASSE FIBER AS PARTIAL REPLACEMENT FOR FINE AGGREGATE IN …
Cellulose Chemistry …, 2023
[11] Thermal Response of Biocarbon-Filled Hemp Fiber-Reinforced Bioepoxy Composites
ACS omega, 2023
[12] The Interaction Effect of the Design Parameters on the Water Absorption of the Hemp-Reinforced Biocarbon-Filled Bio-Epoxy Composites
International Journal of Molecular …, 2023
[13] Nano-Biocomposite Materials Obtained from Laser Ablation of Hemp Stalks for Medical Applications and Potential Component in New Solar Cells
International Journal of …, 2023
[14] Physico-mechanical, thermo-mechanical, and biodegradation properties of unidirectional green-composites from nettle (Girardinia diversifolia) yarn preform and poly …
European Polymer Journal, 2023
[15] Extraction and characterization of novel lignocellulosic fibers from Centaurea hyalolepis plant as a potential reinforcement for composite materials
Journal of …, 2023
[16] Unleashing the potential of bio-based concrete: Investigating its long-term mechanical strength and drying shrinkage in real climatic environments
Cement and Concrete Composites, 2023
[17] A robust process to produce lignocellulosic nanofibers from corn Stover, reed canary grass, and industrial hemp
Polymers, 2023
[18] Influence of Chemical Treatments on the Physical and Mechanical Properties of Furcraea Foetida Fiber for Polymer Reinforcement Applications
Journal of Natural …, 2023
[19] Preparation of Cellulose Nanofibers from Agricultural Waste Hemp by Mechanical Defibrillation
Key Engineering …, 2023
[20] Hemp-based biocarbon-filled biopolymer composites: Its preparation, characterization, and optimization
2023
[21] Estudo de fibras de base natural para aplicação na indústria têxtil
2023
[22] Študij biorazgradnje zaščitnih mask (covid-19) na osnovi respirometrijskih meritev v kompostu
2023
[23] UNAM–Dirección General de Bibliotecas Tesis Digitales Restricciones de uso
2023
[24] Natural fibre reinforced vegetable-oil based polyurethane composites: A review
Journal of Polymer …, 2023
[25] Cellulose-supported bioadsorbent from natural hemp fiber for removal of anionic dyes from aqueous solution
International Journal of Biological Macromolecules, 2023
[26] Thermal steam methane reforming over bimetal-loaded hemp-derived activated carbon-based catalyst for hydrogen production
Research on Chemical …, 2023
[27] A unique approach for in-situ monitoring of the THCA decarboxylation reaction in solid state
… Acta Part A: Molecular …, 2022
[28] Characterization Studies on Novel Cellulosic Fiber Obtained from the Bark of Madhuca Longifolia Tree
Journal of Natural …, 2022
[29] Obtención de fibras de celulosa a partir del líber de la planta cáñamo industrial (Cannabis Sativa L.) mediante tratamiento químico para uso textil.
2022
[30] Enhanced mechanical properties of potassium permanganate treated areca sheath fibre epoxy composite
Materials Today: Proceedings, 2022
[31] Biosorption of methyl orange from aqueous solution with hemp waste, investigation of isotherm, kinetic and thermodynamic studies and modeling using multigene …
Chemical Papers, 2022
[32] Synergistic effect of alkali and silane treatment on mechanical, flammability, and thermal degradation of hemp fiber/epoxy composite
Polymer Composites, 2022
[33] Accelerated Aging Effect in Physical and Thermo-mechanical Properties of Maize Starch Biocomposites Reinforced with Agave Salmiana Fibers from Different Leaf …
Fibers and …, 2022
[34] The morphological and anatomical variability of the stems of an industrial hemp collection and the properties of its fibres
Heliyon, 2022
[35] Hemp-Based Materials for Applications in Wastewater Treatment by Biosorption-Oriented Processes: A Review
Crini, V Placet, C Bradu… - Cannabis/Hemp for …, 2022
[36] Influence of alkalinity on self-treatment process of natural fiber and properties of its geopolymeric composites
… and Building Materials, 2022
[37] Sustainable, Tree-Free, PLA Coated, Biodegradable, Barrier Papers from Kendir (Turkish Hemp)
Journal of Natural …, 2022
[38] Effect of Alkaline Treatment and Graphene Oxide Coating on Thermal and Chemical Properties of Hemp (Cannabis Sativa L.) Fibers
Journal of Natural …, 2022
[39] Characterisation of Elementary Kenaf Fibres Extracted Using HNO3 and H2O2/CH3COOH
Fibers, 2022
[40] Thermal and mechanical characterization of adobes bio-sourced with Pennisetum setaceum fibers and an application for modern buildings
… and Building Materials, 2022
[41] Investigation on Physicochemical, Thermal and Mechanical Properties of New Cellulosic Fiber Obtained from the Stem of Tecoma Stans
Journal of Natural …, 2022
[42] Dilute Acid Pretreatment of Wheat Stubble Agro-Residues to Eliminate Non-Process Components Meant for Papermaking and its Impact on Mechanical Strength …
Asian Journal of Science and Applied Technology, 2022
[43] Nanocellulose Production from Low-Cost Agricultural Residues: Process Development, Economic Assessment, and Process Robustness
2022
[44] Behaviour and design of natural fibre reinforced concrete
2022
[45] Structural and Diagnostic Investigations on Materials and Plasters of the Biblioteca Umanistica of the University of Florence
… Florence Heri-Tech: the …, 2022
[46] Suitability of surface-treated flax and hemp fibers for concrete reinforcement
Fibers, 2022
[47] Water Down Acid Pretreatment of Wheat Stubble Agro-residues to Eliminate Non-process Components Meant for Papermaking and Its Impact on Mechanical Strength …
2022
[48] ANALYTICAL CHARACTERIZATION OF BIBLE AND TEXTILES ARTIFACTS FROM SINOPE BALATLAR CHURCH EXCAVATIONS FOR CONSERVATION …
Mediterranean …, 2022
[49] Design and test of bioinspired specimens by using tensile testing machine and Digital Image Correlation
2021
[50] Properties of Hemp Fibre Reinforced Polymer Composites
Vegetable Fiber Composites and their …, 2021
[51] The influence of different chemical treatments on the mechanical properties of hemp fibre-filled polymer composites
2021
[52] Characterization of Sida acuta fiber and its polymer composites with effect of fly ash
Journal of Natural …, 2021
[53] Physicochemical and Thermal Properties of New Cellulosic Fiber Obtained from the Stem of Markhamia lutea
Journal of Natural …, 2021
[54] Use of Chènevotte, a valuable co-product of industrial hemp fiber, as adsorbent for pollutant removal. Part I: chemical, microscopic, spectroscopic and …
Crini, X Gabrion… - Molecules, 2021
[55] Characterization of flax and hemp using spectrometric methods
Applied Sciences, 2021
[56] Vibrational Spectroscopic Analyses and Imaging of the Early Middle Ages Hemp Bast Fibres Recovered from Lake Sediments
2021
[57] The Utilization of Water Hyacinth for Biogas Production in a Plug Flow Anaerobic Digester
2021
[58] Potential Use of Alternative Binder to Improve Durability of Hemp Concrete Under Cyclic Wetting/Drying Aging
SSRN Electronic Journal, 2021
[59] Bacterial Cellulose Nanocomposites with Lignin: Fabrication and Characterization of Structure, Mechanical & Thermal Properties
2021
[60] KENEVİR LİFLERİNİN ELDESİ, ÖZELLİKLERİ VE KOMPOZİT UYGULAMA ALANLARI
Bart?n University International Journal of Natural and Applied Sciences, 2021
[61] Influence of acrylic latex and pre-treated hemp fibers on cement based mortar properties
2021
[62] Sphere-like and flake-like ZnO immobilized on pineapple leaf fibers as easy-to-recover photocatalyst for the degradation of congo red
2021
[63] Hydrothermal production of high-molecular weight hemicellulose-pectin, free sugars and residual cellulose pulp from discarded carrots
2021
[64] Overview of nanocellulose as additives in paper processing and paper products
2021
[65] Sustainable process for the production of cellulose by an Acetobacter pasteurianus RSV-4 (MTCC 25117) on whey medium
2021
[66] Extraction and characterization of indigenous Ethiopian castor oil bast fibre
2021
[67] A Comparative Study of Ni (II) Removal from Aqueous Solutions on Ca-Alginate Beads and Alginate-Impregnated Hemp Fibers
2021
[68] PECTIN QUANTIFICATION FROM CELLULOSIC/LIGNOCELLULOSIC RAW MATERIALS BY FT-IR ATR ANALYSIS
2020
[69] Characterization of Urena lobata Fibers after Alkaline Treatment for Use in Polymer Composites
2020
[70] Mechanical, thermal, hygroscopic and acoustic properties of bio-aggregates–lime and alkali-activated insulating composite materials: A review of current status and …
2020
[71] Hemp Fibers for Wastewater Treatment
2020
[72] Physicomechanical Properties of Treated Oil Palm-Broom Fibers for Cementitious Composites
2020
[73] Rheological, tensile, and thermal properties of poly (butylene succinate) composites filled with two types of cellulose (kenaf cellulose fiber and commercial cellulose)
2020
[74] Biodegradable Copolyester-Based Natural Fibers–Polymer Composites: Morphological, Mechanical, and Degradation Behavior
2020
[75] Effect of the interplay of composition and environmental humidity on the nanomechanical properties of hemp fibers
2020
[76] Effect of self-treatment process on properties of natural fiber-reinforced geopolymer composites
2020
[77] Investigation on the tensile and flexural behavior of coconut inflorescence fiber reinforced unsaturated polyester resin composites
2020
[78] Physicochemical characterisation of bio-based insulation to explain their hygrothermal behaviour
2020
[79] Hemp Fiber Reinforced Geopolymer Composites: Effects of NaOH Concentration on Fiber Pre-Treatment Process
2020
[80] Biocomposites based on plasticized starch: thermal, mechanical and morphological characterization
2020
[81] Chemical and mineral characterization of Romanian book paper materials (XVII–XIXth century)
2020
[82] Enhanced room-temperature NO 2 sensing properties of biomorphic hierarchical mixed phase WO 3
Nanoscale, 2020
[83] Impact of a microwave treatment of hemp fibers on the hemp/cement interaction
2020
[84] Optimising Moisture Transport in Bio-Based, Earth and Natural Hydraulic Lime Mortars Using Hygrothermal and Chemical Characteristics
2020
[85] High stiffness, high strength and high toughness green composites based on poly (hydroxybutyrate-co-valerate)(PHBV)
2019
[86] Characterization of Manmade and Recycled Cellulosic Fibers for Their Application in Building Materials
2019
[87] The application of hemp (Cannabis sativa L.) for a green economy: a review
2019
[88] Utilization of industrial and hazardous waste materials to formulate energy-efficient hygrothermal bio-composites
2019
[89] Effect of Alkali Treatment on Mechanical and Morphological Properties of Pineapple Leaf Fibre/Polyester Composites
2019
[90] Thermo-physico-chemical and statistical mechanical properties of Washingtonian filifera new lignocellulosic fiber
2019
[91] Development of a sustainable and innovant hygrothermal bio-composite featuring the enhanced mechanical properties
2019
[92] Beating of hemp bast fibres: an examination of a hydro-mechanical treatment on chemical, structural, and nanomechanical property evolutions
2019
[93] Assessment of natural cellulosic fibers derived from Senna auriculata for making light weight industrial biocomposites
2019
[94] Extraction and nutritional properties of protein derived from rice (Oryza sativa) based distillery byproducts: a potential substrate for food formulation
2019
[95] Study on the multi-scale structure and interfacial properties of plant fiber reinforced composites
2019
[96] Structural and thermal characterization of different types of cellulosic fibers
2019
[97] Determinación del efecto de la adición del bagazo de ca?a en la reacción álcali-hidrólisis, sobre las propiedades mecánicas y electroquímicas del sistema concreto-acero de refuerzo
Thesis, 2019
[98] Extraction and Characterization of Lignocellulosic Fibers from Girardinia Bullosa (Steudel) Wedd. (Ethiopian Kusha Plant)
Journal of Natural Fibers, 2018
[99] Estudio del efecto del contenido y tamaño de partículas de la testa de la semilla del fruto de pich (Enterolobium cyclocarpum) sobre las propiedades de un …
2018
[100] Degradation behavior and kinetics of sisal fiber in pore solutions of sustainable cementitious composite containing metakaolin
Polymer Degradation and Stability, 2018
[101] Development of distinct cell wall layers both in primary and secondary phloem fibers of hemp (Cannabis sativa L.)
Industrial Crops and Products, 2018
[102] Hemp fibers (Cannabis sativa) impregnated by Ca-alginate gel as a novel biosorbent for the removal of Pb (II) and Zn (II) ions
2018
[103] Caracterización térmica, mecánica y morfológica de fibras naturales colombianas con potencial como refuerzo de biocompuestos
2018
[104] Ferromagnetic iron oxide–cellulose nanocomposites prepared by ultrasonication
Polymer Chemistry, 2018
[105] Doctorat en
2018
[106] Contribution à l'étude de la durabilité et les performances des bétons autoplaçants (fibres végétales, milieu agressif, formulation, modélisation
2018
[107] MOLECULAR CHARACTERIZATION OF MYXOMYCETES AND FUNGI COLONIZING HEMP HURDS IN WATER ENVIRONMENT
Asian Jr. of Microbiol. Biotech. Env. Sc., 2018
[108] Extraction and characterization of lignocellulosic fibers from girardinia bullosa (Steudel) wedd.(Ethiopian Kusha Plant)
2018
[109] Ash content vs. the economics of using wood chips for energy: Model based on data from Central Europe
2017
[110] Toward the cottonisation of hemp fibers by steam explosion-Part 1: Defibration and morphological
2017
[111] Interactions between volatile organic compounds and natural building materials
2017
[112] CONVERSION OF CHITIN ISOLATED FROM FRESH-WATER PRAWNS TO CHITOSAN AND ITS CHARACTERIZATION
Polymers Research Journal, 2017
[113] Production and characterization of bacterial cellulose before and after enzymatic hydrolysis
African Journal of Biotechnology, 2017
[114] An Efficient Method of Bio-Chemical Combined Treatment for Obtaining High-Quality Hemp Fiber
2017
[115] Toward the cottonization of hemp fibers by steam explosion–Part 1: defibration and morphological characterization
Textile Research Journal, 2017
[116] Degradation of natural fiber in ternary blended cement composites containing metakaolin and montmorillonite
Corrosion Science, 2017
[117] Forensic identification of bast fibres
2017
[118] Thermal, mechanical, and morphological characterization of Colombian natural fibers as potential reinforcement for biocomposites
Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales?, 2017
[119] Development of Hemp Fibers: The Key Components of Hemp Plastic Composites
Natural and Artificial Fiber-Reinforced Composites as Renewable Sources, 2017
[120] Fire performance of natural fibre composites in construction
Advanced High Strength Natural Fibre Composites in Construction, 2017
[121] Targeted pre-treatment of hemp bast fibres for optimal performance in biocomposite materials: A review
Industrial Crops and Products, 2017
[122] Selective Depolymerization of Industrial Hemp and its Effects on Thermal Resistivity
2017
[123] CONVERSION OF CHITIN ISOLATED FROM FRESH-WATER PRAWNS TO CHITOSAN AND ITS CHARACTERIZATION.
Polymers Research …, 2017
[124] Theoretical analysis and FTIR of cellulose nanowhiskers/Poly (Butyl Acrylate)
2016
[125] A probabilistic model of the tensile strength of a UD flax–fabric‐reinforced polymer composite
Polymer composites, 2016
[126] OBTENCIÓN DE CELULOSA A PARTIR DE BAGAZO DE CAÑA DE AZUCAR (Saccharum spp.)
2016
[127] Cannabis sativa (Cannabaceae) in ancient clay plaster of Ellora Caves, India
2016
[128] Mechanical and thermal characterization of polyester composite containing treated wood flour from Palm oil biomass
Polymer composites, 2016
[129] Theoretical analysis and FTIR of cellulose nanowhiskers/Poly (ButylAcrylate)
2016
[130] OBTENCIÓN DE CELULOSA A PARTIR DE BAGAZO DE CAÑA DE AZUCAR (Saccharum spp.).
Agroproductividad, 2016
[131] Evaluation of the retting process as a pre-treatment of vegetable fibers for the preparation of high-performance polymer biocomposites
Industrial Crops and Products, 2016
[132] Utilization of rice husk ash in green natural fiber-reinforced cement composites: Mitigating degradation of sisal fiber
Cement and Concrete Research, 2016
[133] Correlation between hydration of cement and durability of natural fiber-reinforced cement composites
Corrosion Science, 2016
[134] Obtención de celulosa a partir de bagazo de caña de azúcar (Saccharum spp.)
2016
[135] OBTENCION DE CELULOSA A PARTIR DE BAGAZO DE CANA DE AZUCAR (Saccharum spp.).
Martínez, GI Bolio-López, L Veleva… - …, 2016
[136] Properties of bio-based insulation materials and their potential impact on indoor air quality
2015
[137] Wettability of Nanostructured Surfaces
2015
[138] Effects of Dilute Acid Pretreatment on Chemical and Physical Properties of Kenaf Biomass
Journal of Natural Fibers, 2015
[139] Low-cost hemp biomaterials for nickel ions removal from aqueous solutions
Journal of Molecular Liquids, 2015
[140] Modeling the tensile strength of hemp fibers and short-hemp-fiber reinforced composites
Natural Filler and Fibre Composites: Development and Characterisation, 2015
[141] Degradation mechanisms of natural fiber in the matrix of cement composites
Cement and Concrete Research, 2015
[142] Ground Hemp Fibers as Filler/Reinforcement for Thermoplastic Biocomposites
Advances in Materials Science and Engineering, 2015
[143] Effects of resin inside fiber lumen on the mechanical properties of sisal fiber reinforced composites
Composites Science and Technology, 2015
[144] Preparation of Durian Skin Nanofibre (DSNF) and Its Effect on the Properties of Polylactic Acid (PLA) Biocomposites
2015
[145] OBTENCIÓN Y CARACTERIZACIÓN DE CELULOSA A PARTIR DEL FRUTO DE LA ESPECIE Ceiba pentandra (L.) Gaertn (KAPOK)
2015
[146] Elementary kenaf fibre extraction
2015
[147] Injection moulded short hemp fibre polypropylene composites
2015
[148] Determination of properties of Althaea officinalis L.(Marshmallow) fibres as a potential plant fibre in polymeric composite materials
Composites Part B: Engineering, 2014
[149] Durability of Cement Composites Reinforced with Sisal Fiber
ProQuest Dissertations Publishing, 2014
[150] Caractérisation du comportement hygro-mécanique des fibres liberiennes élémentaires issues du chanvre
Thèse, 2014
[151] Properties Characterization of Chemically Modified Hemp Hurds
Materials, 2014
[152] Effect of Surface Treatment and Fiber Orientation on the Tensile and Morphological Properties of Banana Stem Fiber Reinforced Natural Rubber Composite
Journal of Minerals and Materials Characterization and Engineering , 2014
[153] Degradation rate of natural fiber in cement composites exposed to various accelerated aging environment conditions
Corrosion Science, 2014
[154] Multi-scale analysis of the structure and mechanical performance of woody hemp core and the dependence on the sampling location
Industrial Crops and Products , 2014
[155] Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibres isolated from waste plant biomass such as hemp
Composites Part B: Engineering, 2014
[156] Interacción nanowhiskas de celulosa/poli (acrilato de butilo)
2014
[157] WHISKERS DE CELULOSA A PARTIR DE RESIDUOS AGROINDUSTRIALES DE BANANO: OBTENCI ?ON Y CARACTERIZACI ?ON
Revista Mexicana de Ingeniería Química, 2013
[158] Synthetic fabrics coated with zinc oxide nanoparticles by electroless deposition: Structural characterization and wetting properties
Journal of Polymer Science Part B: Polymer Physics, 2013
[159] Moisture Absorption and Desorption in Flax and Hemp Fibres and Yarns
FIBRES & TEXTILES in Eastern Europe, 2013
[160] Strength-length scaling of elementary hemp fibers
Carbohydrate polymers, 2013
[161] Lightweight Composites Based on Cellulosic Material
International Journal of Modern Manufacturing Technologies, 2013
[162] A review of bast fibres and their composites: Part 3–Modelling
Composites Part A: Applied Science and Manufacturing , 2013
[163] Extraction and properties of Ferula communis(chakshir) fibers as novel reinforcement for composites materials
Composites Part B: Engineering, 2013
[164] Green modification of natural fibres with nanocellulose
RSC Advances, 2013
[165] Influence of alkali treatment on the structure and properties of hemp fibers
Fibers and Polymers, 2013
[166] Analysis of the hemp fiber mechanical properties and their scattering (Fedora 17)
Industrial Crops and Products , 2013
[167] Damage characterisation on PP-hemp/aluminium fibre–metal laminates using acoustic emission
Journal of Composite Materials, 2013
[168] Extraction and properties of Ferula communis (chakshir) fibers as novel reinforcement for composites materials
Composites Part B: Engineering, 2013
[169] Comparison of Spanish broom (Spartium junceum L.) and flax (Linum usitatissimum) fibre
Textile Research Journal, 2012
[170] Preparation and characterization of physical properties of durian skin fibers biocomposite
Advanced Materials Research , 2012
[171] Diameter dependence of the apparent tensile modulus of hemp fibres: A morphological, structural or ultrastructural effect?
Composites Part A: Applied Science and Manufacturing, 2012
[172] In situ observations of microscale damage evolution in unidirectional natural fibre composites
Composites Part A: Applied Science and Manufacturing, 2012
[173] Chemical modification of hemp shives and their characterization
Procedia Engineering , 2012
[174] Mechanical damage characteristics of elementary hemp fibers and scale effect of fiber strength
High Performance Structures and Materials VI, 2012
[175] Characterization on Surface Modification of Kenaf Biomass via Microbial Fermentation
Advanced Materials Research , 2012
[176] Influence of Twisting Degree and Number of Cords on the Structure of Silk
Materials Sciences and Applications, 2011
[177] Whiskers de celulosa a partir de residuos agroindustriales de banano: Obtención y caracterización
Revista mexicana de ingeniería química, 2011
[178] OBTENCIÓN DE CELULOSA A PARTIR DE RESIDUOS AGROINDUSTRIALES DE CAÑA DE AZUCAR(Saccharumofficinarum L.)
2011
[179] WHISKERS DE CELULOSA A PARTIR DE RESIDUOS AGROINDUSTRIALES DE BANANO: OBTENCION Y CARACTERIZACI ′ ON
Revista Mexicana de Ingeniería Química, 2011
[180] Cellulose whiskers from agro-industrial banana wastes: Isolation and characterization
2011
[181] SAN NICOLÁS DE HIDALGO
2010
[182] Characterization and performance of elementary hemp fibres: factors influencing tensile strength
BioResources, 2010
[183] Contribution à l'étude de la durabilité et les performances des bétons autoplaçants (fibres végétales, milieu agressif, formulation, modélisation.
[184] Determinación del efecto de la adición del bagazo de caña en la reacción álcali-hidrólisis, sobre las propiedades mecánicas y electroquímicas del …
[185] Fiber Properties of Some Non-Woods as Possible Reinforcement in Composite Making
[186] STUDY OF INTEGRATION, DISTRIBUTION AND DEGRADATION OF SUGARCANE BAGASSE FIBER AS PARTIAL REPLACEMENT FOR FINE AGGREGATE …

Copyright © 2026 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.