World Journal of Engineering and Technology

World Journal of Engineering and Technology

ISSN Print: 2331-4222
ISSN Online: 2331-4249
www.scirp.org/journal/wjet
E-mail: wjet@scirp.org
"Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-Engineering Plastic"
written by Young-Hyu Choi, Cheol-Min Kim, Hwan-Seock Jeong, Jeong-Ho Youn,
published by World Journal of Engineering and Technology, Vol.4 No.3D, 2016
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Effects of 3D-printing processing parameters on FFF parts' porosity: outlook and trends
Materials and Manufacturing Processes, 2024
[2] Investigation on mechanical properties of polyamide 6 and carbon fiber reinforced composite manufactured by fused deposition modeling technique
Journal of Thermoplastic …, 2024
[3] Analysis of shrinkage and dimensional accuracy of additively manufactured tooling for the composite manufacturing
International Journal on Interactive Design and …, 2024
[4] Photocurable comb polyamic acid for solvent-free direct ink writing with low dimensional shrinkage
European Polymer Journal, 2024
[5] Machine Learning in Biomaterials, Biomechanics/Mechanobiology, and Biofabrication: State of the Art and Perspective
Archives of Computational Methods in …, 2024
[6] 3D printing processes in precise drug delivery for personalized medicine
, 2024
[7] Nozzle temperature calibration in 3D printing
International Journal on …, 2024
[8] Influence of the Heated-Bed Material on PLA Mechanical Properties and Energy Consumption in the FDM Process
Arabian Journal for …, 2024
[9] Comparative study of experimental thermographic data and finite element analysis on temperature evolution of PET-G layer deposition during additive manufacturing …
Bulletin of the Polish …, 2024
[10] Influence of Thermal Treatment on Surface Roughness, Microstructural, and Mechanical Properties of 3D Printed ABS
2024
[11] Check for Sustainability of Fused Deposition Modeling: The Role of the Plate Material Ersilia Cozzolino (), Francesco Napolitano, Antonello Astarita, Valentina …
Dynamic Response and Failure of Composite …, 2023
[12] Ποιοτική διερεύνηση (βελτιστοποίηση–μοντελοποίηση) παραμέτρων της τρισδιάστατης εκτύπωσης πολυμερών υλικών για την παραγωγή λεπτότοιχων φυσικών …
2023
[13] Міцність і пружність PLA+ графіт композитів: експериментальний і теоретичний аналіз
Mechanics and Advanced …, 2023
[14] A Review on the Impact of Polylactic Acid (PLA) Material on Products Manufactured Using Fused Deposition Modeling (FDM) Additive Manufacturing Method
Gazi Mühendislik Bilimleri …, 2023
[15] Experimental Investigation of Build Time During ABS Filament Material Extrusion Process
International Conference on Textile …, 2023
[16] Effect of Printing Parameters on the Internal Geometry of Products Manufactured by Fused Filament Fabrication (FFF)
Núñez, 2023
[17] Material extrusion-based additive manufacturing: G-code and firmware attacks and Defense frameworks
2023
[18] Investigation of the impact of the short fiber reinforcements on the thermal and mechanical properties of polymer-based composites manufactured by material …
The International Journal of …, 2023
[19] Influence of Raster Orientation and Feeding Rate on the Mechanical Properties of Short Carbon Fiber-Reinforced Polyamide Printed by Fused-Filament Fabrication
Filho - 3D Printing and Additive Manufacturing, 2023
[20] Characterisation of print path deviation in material extrusion
Progress in Additive Manufacturing, 2023
[21] Recycling of Acrylonitrile Butadiene Styrene from Electronic Waste for the Production of Eco-Friendly Filaments for 3D Printing
3D Printing and …, 2023
[22] Optimization of process parameters in additive manufacturing based on the finite element method
arXiv preprint arXiv:2310.15525, 2023
[23] Establishing a Framework for Fused Filament Fabrication Process Optimization: A Case Study with PLA Filaments
Polymers, 2023
[24] Acrylonitrile butadiene styrene/thermoplastic polyurethane blends for material extrusion three-dimensional printing: effects of blend composition on printability and …
ACS …, 2023
[25] Additive Manufacturing for Phase Change Thermal Energy Storage and Management
Additive Manufacturing, 2023
[26] A Bayesian regularization network approach to thermal distortion control in 3D printing
Computational Mechanics, 2023
[27] Facilitating the additive manufacture of high-performance polymers through polymer blending: A review
European Polymer …, 2023
[28] Strategies To Modify the Surface and Bulk Properties of 3D-Printed Solid Scaffolds for Tissue Engineering Applications
ACS …, 2023
[29] Optimizing fused filament fabrication process parameters for quality enhancement of PA12 parts using numerical modeling and taguchi method
Heliyon, 2023
[30] Prediction of The Mechanical Behavior of Polylactic Acid Parts with Shape Memory Effect Fabricated by FDM
Polymers, 2023
[31] Development of a large-scale multi-extrusion FDM printer, and its challenges
International Journal of …, 2023
[32] Adhesion behaviour of 3D printed polyamide–carbon fibre composite filament
Reviews on Advanced …, 2022
[33] High-performance polymer 3D printing–Open-source liquid cooled scalable printer design
HardwareX, 2022
[34] The Effects of Toolpath and Glass Fiber Reinforcement on Bond Strength and Dimensional Accuracy in Fused Filament Fabrication of a Hot Melt Adhesive
THE EFFECT OF …, 2022
[35] Influência da temperatura ambiente no comportamento mecânico do PLA utilizado em manufatura aditiva
Matéria (Rio de Janeiro), 2022
[36] Development of a Finite Element Modelling Procedure for the Prediction of Deformation in Components Produced by the Fused Depositional Modelling Process
2022
[37] Estudio y diseño de materiales de impresión 3d que soporten los sistemas de esterilización médicos
2022
[38] АДДИТИВНЫЕ ТЕХНОЛОГИИ ПРОИЗВОДСТВА ДЕТАЛЕЙ ЖИДКОСТНОКОЛЬЦЕВОГО ВАКУУМНОГО НАСОСА ДЛЯ ПРОЦЕССОВ АПК
НАУКА В ЦЕНТРАЛЬНОЙ РОССИИ, 2022
[39] The effects of toolpath and glass fiber reinforcement on bond strength and dimensional accuracy in material extrusion of a hot melt adhesive
Additive Manufacturing, 2022
[40] Additive Manufacturing of Large Size Parts Through Retrofitment of Three-Axes CNC Machining Centre
2022
[41] Key parameters controlling surface quality and dimensional accuracy: A critical review of FFF process
Materials and …, 2022
[42] A multi-parametric process evaluation of the mechanical response of PLA in FFF 3D printing
Materials and …, 2022
[43] Controlling the properties of parts 3D printed from recycled thermoplastics: A review of current practices
de-Oliveira… - Polymer Degradation and …, 2022
[44] Use of Auxetic Infill Structures for the Compensation of Shrinkage in Fused Filament Fabrication Process
… Conference on Flexible …, 2022
[45] Sustainability of Fused Deposition Modeling: The Role of the Plate Material
… Symposium on Dynamic …, 2022
[46] A study of variation in the cross-sectional areas of thermoplastic filaments on lattice structures manufactured by fused filament fabrication
2021
[47] Effect of the ironing process on parts produced by Fused Filament Fabrication
2021
[48] Autor
2021
[49] Thickness effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling
Procedia Structural Integrity, 2021
[50] On the impact of additive manufacturing processes complexity on modelling
Applied Sciences, 2021
[51] Shrinkage Compensation for FFF Printing for PLA, ABS, and PETG Thermoplastics
2021
[52] Spatiotemporal G-code modeling for secure FDM-based 3D printing
2021
[53] Research on the Fused Deposition Modeling of Polyether Ether Ketone
2021
[54] Fused filament fabrication of novel phase-change material functional composites
2021
[55] Effect of process parameters on thermal and mechanical properties of polymer‐based composites using fused filament fabrication
Polymer …, 2021
[56] Spatio-temporal analysis and monitoring of temperature in extrusion-based AM processes
2021
[57] Computational and empirical modeling of additive manufacturing processes
2021
[58] Study on the Optimal 3D Printing Conditions for Waterproof Thermal Manikin Generation
Textile Science and …, 2021
[59] Improvement of thermal conditions in extrusion additive manufacturing of ULTEM
2021
[60] Process and Material Modifications to Enable New Material for Material Extrusion Additive Manufacturing
2020
[61] Solvent-free UV-curable Acrylic Adhesives for 3D printer build sheet
2020
[62] Effect of infill pattern and density on tensile properties of 3d printed polylactic acid parts via fused deposition modeling (FDM)
2020
[63] Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects
2020
[64] DIMENSIONAL ACCURACY OF FUSED FILAMENT FABRICATION BY CASSAVA ADHESION ON PRINTING PLATFORM
2020
[65] Общедоступные технологии 3D-печати в химии, биохимии и фармацевтике: приложения, материалы, перспективы
2020
[66] Design of a low-cost, high-temperature inverted build environment to enable desktop-scale additive manufacturing of performance polymers
2020
[67] Study on the 3D printability of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/poly (lactic acid) blends with chain extender using fused filament fabrication
2020
[68] 3D printing of glass by additive manufacturing techniques: A review
2020
[69] Thermographic Analysis of 3D Printed Dental Models
2020
[70] A Short Review on Automobile Dashboard Materials
2020
[71] Study on the 3D printability of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(lactic acid) blends with chain extender using fused filament fabrication
2020
[72] Influence of bed temperature on warpage, shrinkage and density of various acrylonitrile butadiene styrene (ABS) parts from fused deposition modelling (FDM)
2020
[73] A Review on New 3-D Printed Materials' Geometries for Catalysis and Adsorption: Paradigms from Reforming Reactions and CO2 Capture
2020
[74] EFFECTS OF PRINTING CONDITIONS ON PROPERTIES OF POLYCARBONATE SAMPLES MADE BY FUSED FILAMENT FABRICATION PROCESS
2019
[75] Direct Ink Writing of High Performance Architectured Polyimides with Low Dimensional Shrinkage
2019
[76] Investigation For Shrinkage Deformation In The Desktop 3D Printer Process By Using DOE Approach Of The ABS Materials
2019
[77] Eriyik Biriktirme Yönteminde Farklı Üretim Parametrelerinin Mekanik Özelliklere Etkisi
ALKü Fen Bilimleri Dergisi, 2019
[78] Enhanced mechanical properties of plasticized polylactic acid filament for fused deposition modelling: Effect of in situ heat treatment
2019
[79] Experimental Investigations and Parametric Optimization of Selective Inhibition Sintering Process
2019
[80] Fused deposition modelling of kenaf fibre/thermoplastic polyurethane/epoxidized natural rubber composites
2019
[81] Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
2019
[82] Developing protein-based bio-inks for FDM 3D printed microfluidic and millifluidic biosensor applications
2019
[83] Accuracy (trueness and precision) of dental models fabricated using additive manufacturing methods
2018
[84] Characterization and Processing Behavior of Heated Aluminum-Polycarbonate Composite Build Plates for the FDM Additive Manufacturing Process
Journal of Manufacturing and Materials Processing, 2018
[85] Vpliv zapolnitve na mehanske lastnosti izdelkov iz PLA in ABS narejenih po metodi ciljnega nalaganja
2018
[86] Avaliação dos parâmetros de processamento em impressão 3D nas propriedades do poliácido lático
2018
[87] Accuracy (trueness and precision) of dental models fabricated using additive manufacturing methods.
International journal of …, 2018
[88] Study of Different Printing Design Type Polymer Samples Prepared by Additive Manufacturing
2017
[89] PENENTUAN PARAMETER OPTIMUM DALAM PERAKITAN 3D PRINTER REPRAP DAN PEMBUATAN PRODUK
2017
[90] An investigation on applying different types of adhesive to reduce warping deformation in open source 3D printer
2017
Free SCIRP Newsletters
Copyright © 2006-2025 Scientific Research Publishing Inc. All Rights Reserved.
Top