Top Cited Articles
(564 articles with 5023 citations as of July 2024)

• Drone Applications for Supporting Disaster Management, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Agoston Restas
• Citations: 351 (Details)

• Heart Disease Detection by Using Machine Learning Algorithms and a Real-Time Cardiovascular Health Monitoring System, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Shadman Nashif, Md. Rakib Raihan, Md. Rasedul Islam, Mohammad Hasan Imam
• Citations: 207 (Details)

• Intelligent Parking Management System Based on Image Processing, World Journal of Engineering and Technology, Vol.2 No.2, 2014
• Hilal Al-Kharusi, Ibrahim Al-Bahadly
• Citations: 161 (Details)

• Review on Innovative Catalytic Reforming of Natural Gas to Syngas, World Journal of Engineering and Technology, Vol.4 No.1, 2016
• Salwa A. Ghoneim, Radwa A. El-Salamony, Seham A. El-Temtamy
• Citations: 135 (Details)

• Effect of Chitosan Supplemented Diet on Survival, Growth, Feed Utilization, Body Composition & Histology of Sea Bass (Dicentrarchus labrax), World Journal of Engineering and Technology, Vol.3 No.4C, 2015
• M. A. Zaki, M. El-S. Salem, M. M. Gaber, A. M. Nour
• Citations: 91 (Details)

• Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-Engineering Plastic, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Young-Hyu Choi, Cheol-Min Kim, Hwan-Seock Jeong, Jeong-Ho Youn
• Citations: 90 (Details)

• Potential Utilization of Sawdust in Energy, Manufacturing and Agricultural Industry; Waste to Wealth, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• O. L. Rominiyi, B. A. Adaramola, O. M. Ikumapayi, O. T. Oginni, S. A. Akinola
• Citations: 82 (Details)

• Adsorptive Treatment of Textile Wastewater Using Activated Carbon Produced from Mucuna pruriens Seed Shells, World Journal of Engineering and Technology, Vol.4 No.1, 2016
• Chinenye Adaobi Igwegbe, Pius Chukwukelue Onyechi, Okechukwu Dominic Onukwuli, Ikenna Chukwudi Nwokedi
• Citations: 53 (Details)

• Nigerian Wood Waste: A Dependable and Renewable Fuel Option for Power Production, World Journal of Engineering and Technology, Vol.2 No.3, 2014
• Kehinde Oluoti, Godswill Megwai, Anita Pettersson, Tobias Richards
• Citations: 51 (Details)

• Natural Gas Flaring—Alternative Solutions, World Journal of Engineering and Technology, Vol.5 No.1, 2017
• Azeez G. Aregbe
• Citations: 49 (Details)

• Calculations of Heat Transfer in Torch Furnaces by Gas Volume Radiation Laws, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• A. N. Makarov
• Citations: 47 (Details)

• The Contributions of Building Information Modelling to Sustainable Construction, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Sahar Soltani
• Citations: 43 (Details)

• Preventive Maintenance Characteristics towards Optimal Maintenance Performance: A Case Study of Office Buildings, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Cheong Peng Au-Yong, Azlan Shah Ali, Faizah Ahmad
• Citations: 43 (Details)

• Sundarban as a Buffer against Storm Surge Flooding, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Mohiuddin Sakib, Fatin Nihal, Anisul Haque, Munsur Rahman, Mansur Ali
• Citations: 42 (Details)

• Friction Stir Welding of Dissimilar Aluminum Alloys, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Hassan Abd El-Hafez, Abla El-Megharbel
• Citations: 42 (Details)

• Cr(VI) Removal from Aqueous Solution by Chitosan/Carboxylmethyl Cellulose/Silica Hybrid Membrane, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Xuemei He, Huidong Xu, Hui Li
• Citations: 39 (Details)

• Intelligent Parking System, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Abdul Ahad, Zishan Raza Khan, Syed Aqeel Ahmad
• Citations: 38 (Details)

• Water Related Disaster Management Supported by Drone Applications, World Journal of Engineering and Technology, Vol.6 No.2B, 2018
• Agoston Restas
• Citations: 36 (Details)

• Technical Analysis of Exoskeleton Robot, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Sungjun Yeem, Jinyeong Heo, Hongchul Kim, Yongjin Kwon
• Citations: 35 (Details)

• Estimating Mass of Harvested Asian Seabass Lates calcarifer from Images, World Journal of Engineering and Technology, Vol.6 No.3B, 2018
• Dmitry A. Konovalov, Alzayat Saleh, Jose A. Domingos, Ronald D. White, Dean R. Jerry
• Citations: 34 (Details)

• Development of Rescue Material Transport UAV (Unmanned Aerial Vehicle), World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Daeil Jo, Yongjin Kwon
• Citations: 34 (Details)

• Performance Study of PID Controller and LQR Technique for Inverted Pendulum, World Journal of Engineering and Technology, Vol.3 No.2, 2015
• Akhil Jose, Clint Augustine, Shinu Mohanan Malola, Keerthi Chacko
• Citations: 33 (Details)

• Current Trends in Competency Based Education, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Marcela Hernández-de-Menéndez, Ruben Morales-Menendez
• Citations: 31 (Details)

• Preparation of KOH/CaO/C Supported Biodiesel Catalyst and Application Process, World Journal of Engineering and Technology, Vol.2 No.3, 2014
• Jianwei Zhang, Qingming Meng
• Citations: 30 (Details)

• Evaluation of Low Saline “Smart Water” Enhanced Oil Recovery in Light Oil Reservoirs, World Journal of Engineering and Technology, Vol.2 No.1, 2014
• Yogesh Kumar Suman, Ezeddin Shirif, Hussameldin Ibrahim, Abdulsalam Ala-Ktiwi
• Citations: 30 (Details)

• Ship System Maintenance Strategy Selection Based on DELPHI-AHP-TOPSIS Methodology, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Ikuobase Emovon
• Citations: 29 (Details)

• Structural Modification of Sand Cast Eutectic Al-Si Alloys with Sulfur/Sodium and Its Effect on Mechanical Properties, World Journal of Engineering and Technology, Vol.1 No.2, 2013
• Chikezie W. Onyia, Boniface A. Okorie, Simeon I. Neife, Camillus S. Obayi
• Citations: 28 (Details)

• Green-Wave Traffic Theory Optimization and Analysis, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Xiaoping Wu, Shuai Deng, Xiaohong Du, Jing Ma
• Citations: 28 (Details)

• An Overview of Pakistan’s Textile Sector from Operational Competitive Perspective—A Suggestive Analysis!, World Journal of Engineering and Technology, Vol.2 No.2, 2014
• Syeda Asiya Zenab Kazmi, Josu Takala
• Citations: 28 (Details)

• Understanding of Earthquake Damage Pattern through Geomorphological Approach: A Case Study of 2006 Earthquake in Bantul, Yogyakarta, Indonesia, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Dwi Wahyuni Nurwihastuti, Junun Sartohadi, Djati Mardiatno, Udo Nehren, Restu  
• Citations: 28 (Details)

• Making the World More Sustainable: Enabling Localized Energy Generation and Distribution on Decentralized Smart Grid Systems, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Harrison John Bhatti, Mike Danilovic
• Citations: 28 (Details)

• Improving the Dielectric Properties of High Density Polyethylene by Incorporating Clay-Nanofiller, World Journal of Engineering and Technology, Vol.2 No.4, 2014
• Ossama E. Gouda, Sohair F. Mahmoud, Ahmed A. El-Gendy, Ahmed S. Haiba
• Citations: 27 (Details)

• Technology and Studies for Greenhouse Cooling, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• Hugang Li, Shuangxi Wang
• Citations: 27 (Details)

• Experimental Characterization of Rutting Performance of HMA Designed with Aggregate Gradations According to Superpave and Marshall Methods, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• Basim H. Al-Humeidawi
• Citations: 27 (Details)

• Effects of Different Fertilization Treatments on Soil, Leaf Nutrient and Fruit Quality of Citrus grandis var. longanyou, World Journal of Engineering and Technology, Vol.5 No.2B, 2017
• Rongfei Li, Yaodong Chang, Tao Hu, Xueyou Jiang, Guolu Liang, Zhiming Lu, Youwen Yi, Qigao Guo
• Citations: 27 (Details)

• Identifying Vehicular Crash High Risk Locations along Highways via Spatial Autocorrelation Indices and Kernel Density Estimation, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Azad Abdulhafedh
• Citations: 26 (Details)

• Physiological Changes in Red Onion Bulbs at Different Storage Temperature, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Mouluda Sohany, Md. Kamal Uddin Sarker, Md. Sultan Mahomud
• Citations: 26 (Details)

• Determination of Tea Saponin in Camellia Seed Oil with UV and HPLC Analysis, World Journal of Engineering and Technology, Vol.3 No.4C, 2015
• Hadeil Omer Abdelgadir Ahmed, Chengming Wang
• Citations: 26 (Details)

• Design of Quantification Model for Ransom Ware Prevent, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Donghyun Kim, Seoksoo Kim
• Citations: 25 (Details)

• An Overview of Folding Techniques in Architecture Design, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Tao Shen, Yukari Nagai
• Citations: 23 (Details)

• Novel Cascade Refrigeration Cycle for Cold Supply Chain of COVID-19 Vaccines at Ultra-Low Temperature -80°C Using Ethane (R170) Based Hydrocarbon Pair, World Journal of Engineering and Technology, Vol.9 No.2, 2021
• Tarek A. Mouneer, Abdelrahman M. Elshaer, Mohamed H. Aly
• Citations: 23 (Details)

• Qualitative and Quantitative Evaluation of Permeability Changes during EOR Polymer Flooding Using Micromodels, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Lucas Oliver Knobloch, Rafael E. Hincapie, Hendrik Födisch, Leonhard Ganzer
• Citations: 22 (Details)

• Three-Dimensional Thermo-Elastic-Plastic Finite Element Method Modeling for Predicting Weld-Induced Residual Stresses and Distortions in Steel Stiffened-Plate Structures, World Journal of Engineering and Technology, Vol.6 No.1, 2018
• Myung Su Yi, Chung Min Hyun, Jeom Kee Paik
• Citations: 22 (Details)

• Design Optimization of TBM Disc Cutters for Different Geological Conditions, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Yimin Xia, Kui Zhang, Jingsheng Liu
• Citations: 22 (Details)

• Acid Value Determination and Pre-Esterification of Crude Euphorbia lathyris L. Oil, World Journal of Engineering and Technology, Vol.3 No.2, 2015
• Qiuyun Zhang, Jinfeng Wu, Peihua Ma, Jie Cai, Yutao Zhang
• Citations: 22 (Details)

• Structural Glass Fiber Reinforced Concrete for Slabs on Ground, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Philipp Löber, Klaus Holschemacher
• Citations: 21 (Details)

• Design of a Fuzzy Logic Based Controller for Fluid Level Application, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• Hina Shahid, Sadia Murawwat, Intesar Ahmed, Sana Naseer, Rukhsar Fiaz, Ayesha Afzaal, Shumaila Rafiq
• Citations: 21 (Details)

• Effect of the Welding Parameters on the Structural and Mechanical Properties of Aluminium and Copper Sheet Joints by Electromagnetic Pulse Welding, World Journal of Engineering and Technology, Vol.4 No.4, 2016
• Irene Kwee, Verena Psyk, Koen Faes
• Citations: 21 (Details)

• Internet of Ships: The Future Ahead, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Guangwu Liu, Rodrigo Perez, Jesus A. Muñoz, Francisco Regueira
• Citations: 21 (Details)

• Interactive Heuristic D* Path Planning Solution Based on PSO for Two-Link Robotic Arm in Dynamic Environment, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Firas A. Raheem, Umniah I. Hameed
• Citations: 21 (Details)

• Estimation of Passenger Car Equivalents for Basic Freeway Sections at Different Traffic Conditions, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Jalal Taqi Shaker Al-Obaedi
• Citations: 20 (Details)

• Simulation of a Triple Inverted Pendulum Based on Fuzzy Control, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Wei Chen, Nkurunziza Theodomile
• Citations: 20 (Details)

• The Irony of Flood Risks in African Dryland Environments: Human Security in North Cameroon, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Henry Bang, Lee Miles, Richard Gordon
• Citations: 20 (Details)

• Fundamental Laws of Physics and Calculation of Heat Transfer in Combustion Chambers of Gas-Turbine Plants, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Anatoly Nikolaevich Makarov
• Citations: 20 (Details)

• Effective Instructions in Design Process of Urban Public Spaces to Promote Sustainable Development, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Mohsen Sanei, Mina Khodadad, Farid Panahi Ghadim
• Citations: 20 (Details)

• Influence of Macro-Topography on Damage Tolerance and Fracture Toughness of Monolithic Epoxy for Tribological Applications, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Rasheed Atif, Fawad Inam
• Citations: 19 (Details)

• Laws of Heat Radiation from Surfaces and Gas Volumes, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Anatoliy Nikolaevich Makarov
• Citations: 18 (Details)

• Assessment of Turbulence Models on Bridge-Pier Scour Using Flow-3D, World Journal of Engineering and Technology, Vol.7 No.2, 2019
• Chandara Man, Genguang Zhang, Vouchleang Hong, Shuang Zhou, Yulin Feng
• Citations: 18 (Details)

• A Review on the Role of Risk Management (RM) and Value Engineering (VE) Tools for Project Successful Delivery, World Journal of Engineering and Technology, Vol.9 No.1, 2021
• Elysé Masengesho, Ji Wei, Nadine Umubyeyi, Rosette Niyirora
• Citations: 18 (Details)

• Numerical Analysis of Thermo-Elastic Contact Problem of Disc Brakes for Vehicle on Gradient Surfaces, World Journal of Engineering and Technology, Vol.4 No.1, 2016
• Moses Omolayo Petinrin, Adewale Adedayo Oyedele, Olusegun Olufemi Ajide
• Citations: 17 (Details)

• Resilience: The New Paradigm in Disaster Management—An Australian Perspective, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Stephen Jenkins, Stephen Jenkins
• Citations: 17 (Details)

• Investigating the Effect of Various Nanomaterials on the Wettability of Sandstone Reservoir, World Journal of Engineering and Technology, Vol.3 No.3, 2015
• El-Abbas Moustafa, Ahmed Noah, Karam Beshay, Lamees Sultan, Mina Essam, Omar Nouh
• Citations: 17 (Details)

• Analysis of Vehicle Seat and Research on Structure Optimization in Front and Rear Impact, World Journal of Engineering and Technology, Vol.2 No.2, 2014
• Haining Chen, Hao Chen, Liangjie Wang
• Citations: 17 (Details)

• Procurement Method Selection for Building Maintenance Projects: The Case of Malaysian Public Universities, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Shirley Jin Lin Chua, Azlan Shah Ali, Anuar Alias
• Citations: 17 (Details)

• Progressive Collapse of Steel Frames, World Journal of Engineering and Technology, Vol.1 No.3, 2013
• Kamel Sayed Kandil, Ehab Abd El Fattah Ellobody, Hanady Eldehemy
• Citations: 17 (Details)

• Prediction of Burst Pressure of a Radial Truck Tire Using Finite Element Analysis, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Kyoung Moon Jeong
• Citations: 17 (Details)

• Anthropometry Survey of Nigerian Occupational Bus Drivers to Facilitate Sustainable Design of Driver’s Workplace, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Onawumi Ayodele Samuel, Dunmade Israel, Fajobi Moses
• Citations: 16 (Details)

• Effects on Strengths of Cement Mortar When Using Incinerator Bottom Ash as Fine Aggregate, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Min-Jen Yang, Hong-Yu Wang, Hong-Yu Wang
• Citations: 16 (Details)

• Intelligent HEV Fuzzy Logic Control Strategy Based on Identification and Prediction of Drive Cycle and Driving Trend, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Limin Niu, Hongyuan Yang, Yuhua Zhang
• Citations: 16 (Details)

• Application of Steel Fiber in Increasing the Strength, Life-Period and Reducing Overall Cost of Road Construction (by Minimizing the Thickness of Pavement), World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Abdul Ahad, Zishan Raza Khan, Shumank Deep Srivastava
• Citations: 16 (Details)

• The Hierarchical Order of Spaces in Arab Traditional Towns: The Case of Najd, Saudi Arabia, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Mohammed Mashary Alnaim
• Citations: 16 (Details)

• Development of Autonomous VTOL UAV for Wide Area Surveillance, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Daeil Jo, Yongjin Kwon
• Citations: 16 (Details)

• Challenges in Thermal Welding of Aluminium Alloys, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Emil Schubert
• Citations: 16 (Details)

• Non-Contact Terahertz Inspection of Water Content in Concrete of Infrastructure Buildings, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Tadao Tanabe, Tomoya Kanai, Kenta Kuroo, Tomoya Nishiwaki, Yutaka Oyama
• Citations: 15 (Details)

• Optimization of an Ammonia Synthesis Converter, World Journal of Engineering and Technology, Vol.2 No.4, 2014
• Jackson Gunorubon Akpa, Nwokoma Raphael Raphael
• Citations: 15 (Details)

• Numerical Study of Slip Effect of Unsteady MHD Pulsatile Flow through Porous Medium in an Artery Using Generalized Differential Quadrature Method (Comparative Study), World Journal of Engineering and Technology, Vol.2 No.2, 2014
• Islam M. Eldesoky, Mohamed H. Kamel, Ramzy M. Abumandour
• Citations: 15 (Details)

• Effectiveness of Using Natural Materials as a Coagulant for Reduction of Water Turbidity in Water Treatment, World Journal of Engineering and Technology, Vol.4 No.4, 2016
• Hussein Janna
• Citations: 15 (Details)

• Study of Zirconium and Hafnium Separation by Solvent Extraction Technique from Nitric and Hydrochloric Solutions with Acid, Basic and Neutral Extractants, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Janúbia Cristina B. S. Amaral, Carlos Antônio de Morais
• Citations: 15 (Details)

• Dynamic Analysis of the Turnout Diverging Track for HSR with Variable Curvature Sections, World Journal of Engineering and Technology, Vol.5 No.1, 2017
• Wladyslaw Koc, Katarzyna Palikowska
• Citations: 15 (Details)

• Sentinel-1 Radar Data Assessment to Estimate Crop Water Stress, World Journal of Engineering and Technology, Vol.5 No.2B, 2017
• M. A. El-Shirbeny, K. Abutaleb
• Citations: 15 (Details)

• Wellbore Stability Problems in Deepwater Gas Wells, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Azeez G. Aregbe
• Citations: 14 (Details)

• Quality Monitoring of Various Local and Imported Brands of Bottled Drinking Water in Saudi Arabia, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Hisham A. Maddah, Abdulazez S. Alzhrani
• Citations: 14 (Details)

• Static and Dynamic Analysis Web Opening of Steel Beams, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Hanady El-Dehemy
• Citations: 14 (Details)

• Effect of Different Rates of Nitrogen and Phosphorous on Growth and Nodulation of Glycine max in the Eastern Region of Sri Lanka, World Journal of Engineering and Technology, Vol.4 No.3B, 2016
• Somasundaram Sutharsan, Varuni Yatawatte, Shanmugalingam Srikrisnah
• Citations: 14 (Details)

• A Theoretical Analysis of Functionally Graded Beam under Thermal Loading, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• Abla El-Megharbel
• Citations: 14 (Details)

• Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources, World Journal of Engineering and Technology, Vol.3 No.3, 2015
• Shuhrat Mamamtovich Azizov, Hamid Tursunovich Axmedhodjaev
• Citations: 14 (Details)

• CNC Thermal Compensation Based on Mind Evolutionary Algorithm Optimized BP Neural Network, World Journal of Engineering and Technology, Vol.4 No.1, 2016
• Yuefang Zhao, Xiaohong Ren, Yang Hu, Jin Wang, Xuemei Bao
• Citations: 14 (Details)

• The Research Progress of Endogenous Formaldehyde in Aquatic Products, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Xuan Zhang, Yunhua Hui, Youqiong Cai, Dongmei Huang
• Citations: 14 (Details)

• Spatial-Temporal Sediment Hydrodynamics and Nutrient Loads in Nyanza Gulf, Characterizing Variation in Water Quality, World Journal of Engineering and Technology, Vol.6 No.2B, 2018
• Angalika W. S. Misigo, Seiji Suzuki
• Citations: 14 (Details)

• Production and Utilization of L-Arabinose in China, World Journal of Engineering and Technology, Vol.6 No.3B, 2018
• Biao Hu, Haiyang Li, Qingfu Wang, Yicong Tan, Ruirong Chen, Jingrong Li, Wenting Ban, Lei Liang
• Citations: 14 (Details)

• Practical Techniques for Restoration of Architectural Formation Elements in Historical Buildings, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Mahran Anwar
• Citations: 14 (Details)

• Vertically-Suspended Environmental Enrichment Alters the Velocity Profiles of Circular Fish Rearing Tanks, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Alissa M. Muggli, Joseph M. Barnes, Michael E. Barnes
• Citations: 13 (Details)

• Physicochemical Properties and Sensory Evaluation of Sponge Cake Supplemented with Hot Air and Freeze Dried Oyster Mushroom (Pleurotus sajor-caju), World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Rana Das, Manobendro Sarker, Mahmuda Begum Lata, Md. Atiqual Islam, Md. Azmain Al Faik, Shagor Sarkar
• Citations: 13 (Details)

• Development of a Reproducible Rating System for Sun Protective Clothing That Incorporates Body Surface Coverage, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Simone L. Harrison, Nathan Downs
• Citations: 13 (Details)

• Application of Enzyme Extracted from Aloe vera Plant in Chemical Pretreatment of Cotton Knitted Textile to Reduce Pollution Load, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• D. Jothi
• Citations: 13 (Details)

• Pressure-Driven Demand and Leakage Simulation for Pipe Networks Using Differential Evolution, World Journal of Engineering and Technology, Vol.1 No.3, 2013
• Naser Moosavian, Mohammad Reza Jaefarzadeh
• Citations: 13 (Details)

• Drone Applications for Preventing and Responding HAZMAT Disaster, World Journal of Engineering and Technology, Vol.4 No.3C, 2016
• Agoston Restas
• Citations: 13 (Details)

• Game Theory Application and Strategic Bidding in Electricity Supply Market, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Zhao Wang, Kwok Lun Lo
• Citations: 12 (Details)

• Design of a Modified Tracking Differentiator, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Zhigao Liu, Yaguang Jiang
• Citations: 12 (Details)

• Environmental Stress Cracking Resistance of Halloysite Nanoclay-Polyester Nanocomposites, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Mohd Shahneel Saharudin, Jiacheng Wei, Islam Shyha, Fawad Inam
• Citations: 12 (Details)

• Development of Advanced Radiation Resistant ODS Steel for Fast Reactor System Applications, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Tae Kyu Kim, Sanghoon Noh, Suk Hoon Kang, Hyun Ju Jin, Ga Eon Kim
• Citations: 12 (Details)

• A New Robust Color Image Watermarking Scheme Based on 3D-DCT, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Xiangguang Xiong
• Citations: 12 (Details)

• On Application of Metal Additive Manufacturing, World Journal of Engineering and Technology, Vol.9 No.1, 2021
• Chunhua Sun, Guangqing Shang
• Citations: 12 (Details)

• Development of Path Planning Algorithm Using Probabilistic Roadmap Based on Modified Ant Colony Optimization, World Journal of Engineering and Technology, Vol.7 No.4, 2019
• Firas A. Raheem, Mohammed I. Abdulkareem
• Citations: 12 (Details)

• Safety Length Simulation of Natural Gas Pipeline Subjected to Transverse Landslide, World Journal of Engineering and Technology, Vol.11 No.1, 2023
• Guizhi Li, Peng Zhang, Zhixiang Li, Zunhai Ke, Gengxin Wu
• Citations: 11 (Details)

• Wheat Yield Response to Water Deficit under Central Pivot Irrigation System Using Remote Sensing Techniques, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• M. A. El-Shirbeny, A. M. Ali, A. Rashash, M. A. Badr
• Citations: 11 (Details)

• Finite Element Modeling of Stamp Forming Process on Fiber Metal Laminates, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Xiaocen Dou, Sivakumar Dhar Malingam, Jae Nam, Shankar Kalyanasundaram
• Citations: 11 (Details)

• Impacts of the Financial Factors on Schedule Delays Risk of the International Contracting Projects: Evidence from Highway BOT Pro-jects in Vietnam, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Hong-Anh Vu, Jianqiong Wang, Lianxing Min, Thihong-Nhung Nguyen
• Citations: 11 (Details)

• A Short-Term Electricity Price Forecasting Scheme for Power Market, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Gao Gao, Kwoklun Lo, Jianfeng Lu, Fulin Fan
• Citations: 11 (Details)

• Factors Analysis of Affecting Loading and Reinforcing Scheme of Large Goods in Railway, World Journal of Engineering and Technology, Vol.4 No.3C, 2016
• Xiaohong Li
• Citations: 10 (Details)

• Characterisation of Raw Sewage and Performance Evaluation of Al-Diwaniyah Sewage Treatment Work, Iraq, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Hussein Janna
• Citations: 10 (Details)

• A Critical Review of Machine Loading Problem in Flexible Manufacturing System, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Ranbir Singh, Rajender Singh, B. K. Khan
• Citations: 10 (Details)

• Performance Evaluation of a DS-CDMA System in a Rayleigh Fading Environment, World Journal of Engineering and Technology, Vol.4 No.1, 2016
• M. A. Rahman, M. M. Alam, Md. Khalid Hossain, Md. Khairul Islam, Khan M. Nasir Uddin, Md. Shahinuzzaman
• Citations: 10 (Details)

• Usability of Polymer Concrete as a Machine-Making Material Regarding Fatigue Strength, World Journal of Engineering and Technology, Vol.1 No.3, 2013
• Ergun Ateş, Mahmut Nedim Gerger
• Citations: 10 (Details)

• Flexible Paper-Based Li-ion Batteries: A Review, World Journal of Engineering and Technology, Vol.9 No.2, 2021
• Amirhossein Ahmadian, Abbas Shafiee, Mohammadali Alidoost, Amin Akbari
• Citations: 10 (Details)

• Research on the Integration of BIM Technology in Prefabricated Buildings, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Yuge Wang, Yueming Wang
• Citations: 10 (Details)

• Carbon Equivalent Fundamentals in Evaluating the Weldability of Microalloy and Low Alloy Steels, World Journal of Engineering and Technology, Vol.9 No.4, 2021
• Munkaila Alhassan, Yussif Bashiru
• Citations: 10 (Details)

• Terahertz Non-Contact Monitoring of Cocoa Butter in Chocolate, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Sebastien Weiller, Tadao Tanabe, Yutaka Oyama
• Citations: 10 (Details)

• Necessity of Collaboration between Technology and Architectural Design in Order to Develop the Urban Space Quality, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Mina Khodadad, Mohsen Sanei
• Citations: 10 (Details)

• Standardization of the Main Dimensions of Design Container Ships in Ports—A Case Study, World Journal of Engineering and Technology, Vol.5 No.4B, 2017
• Soheil Radfar, Amir Taherkhani, Roozbeh Panahi
• Citations: 9 (Details)

• Performance of Heat Transfer Correlations Adopted at Supercritical Pressures: A Review, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Edward Shitsi, Seth Kofi Debrah, Vincent Yao Agbodemegbe, Emmanuel Ampomah-Amoako
• Citations: 9 (Details)

• Flow Instability in Parallel Channels with Water at Supercritical Pressure: A Review, World Journal of Engineering and Technology, Vol.6 No.1, 2018
• Edward Shitsi, Seth Kofi Debrah, Vincent Yao Agbodemegbe, Emmanuel Ampomah-Amoako
• Citations: 9 (Details)

• Evaluation of Ability of Two Different Pneumatic Boxing Gloves to Reduce Delivered Impact Forces and Improve Safety, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Paul Perkins, Alex Jamieson, Wayne Spratford, Allan Hahn
• Citations: 9 (Details)

• Japanese Ways of Developing Urban Underground Recreation Space, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Pei Zhang
• Citations: 9 (Details)

• Effect of Stocking Density on Growth Performance, Production Trait, Food Utilization and Body Composition, of Meagre (Argyrosomus regius), World Journal of Engineering and Technology, Vol.6 No.3B, 2018
• A. Ghozlan, M. A. Zaki, M. A. Essa, M. M. Gaber, E. H. Ebiary, A. Nour
• Citations: 9 (Details)

• The Profiling of International Roughness Index (IRI) Based on Lagrangian Method, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Schun T. Uechi, Hiroshi Uechi
• Citations: 9 (Details)

• Numerical Estimation of the Uneven Wear of Passenger Car Tires, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Sang Wook Lee, Kyoung Moon Jeong, Kee Woon Kim, Jang Hyeon Kim
• Citations: 9 (Details)

• Low Cost Filtration of Domestic Wastewater for Irrigation Purpose, World Journal of Engineering and Technology, Vol.6 No.3, 2018
• Kiemde Maximilien Sosthene, Narcisse Gahi
• Citations: 9 (Details)

• Comparison of Three Commonly Used Equations for Calculating Local Scour Depth around Bridge Pier under Ice Covered Flow Condition, World Journal of Engineering and Technology, Vol.6 No.2B, 2018
• Mohammad Reza Namaee, Yuquan Li, Jueyi Sui, Todd Whitcombe
• Citations: 9 (Details)

• Understanding the Traditional Saudi Built Environment: The Phenomenon of Dynamic Core Concept and Forms, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Mohammed Mashary Alnaim
• Citations: 9 (Details)

• Computer Aided Design of Differential Pressure Flow Meters, World Journal of Engineering and Technology, Vol.2 No.2, 2014
• Yevhen Pistun, Leonid Lesovoy, Fedir Matiko, Roman Fedoryshyn
• Citations: 9 (Details)

• CAE Characterization and Optimization of Automotive Seat Rattle Noise, World Journal of Engineering and Technology, Vol.2 No.3, 2014
• Milad Tatari, Mohammad Fard, Naser Nasrollahzadeh, Mohammad Mahjoob
• Citations: 9 (Details)

• Expression of Genes Affecting Skin Coloration and Sugar Accumulation in Apple Fruits at Ripening Stages in High Temperatures, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• Seon Ae Kim, Soon Young Ahn, Hyun Hee Han, In Chang Son, Hae Keun Yun
• Citations: 9 (Details)

• Palm Oil Microencapsulation by Coacervation, Thin Layer Drying, and Silica Dioxide Absorption Technique, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• Nur Wulandari, Tien R. Muchtadi, Tien R. Muchtadi, Rachel Irene
• Citations: 9 (Details)

• Development and Performance Study of Controlled Atmosphere for Fresh Tomato, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Md. Farid Ahmed, Md. Zahirul Islam, Md. Sazzat Hossain Sarker, S. M. Kamrul Hasan, Rakib Mizan
• Citations: 9 (Details)

• Design and Fabrication of Ginger Harvesting Machine, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• M. R. Sanjay, G. R. Arpitha, L. Laxmana Naik, B. Yogesha
• Citations: 9 (Details)

• Design and Development of Mechatronic Application in Agricultural Irrigation Device, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• Mohd Hudzari Razali, Syazili Roslan, Abdul Ssomad Mohd Abd Halim, Hayan Basit
• Citations: 9 (Details)

• Degradation of Aqueous 2,6-Dibromophenol Solution by In-Liquid Dielectric Barrier Microplasma, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• Shin-Ichiro Kojima, Keiko Katayama-Hirayama, Tetsuya Akitsu
• Citations: 9 (Details)

• Dynamic Programming to Identification Problems, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Nina N. Subbotina, Evgeniy A. Krupennikov
• Citations: 9 (Details)

• Medical Image Segmentation of Improved Genetic Algorithm Research Based on Dictionary Learning, World Journal of Engineering and Technology, Vol.5 No.1, 2017
• Xianqi Cao, Jiaqing Miao, Yu Xiao
• Citations: 9 (Details)

• Research on Quality Risk of EPC Hydropower Projects in Vietnam, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Sy Hung Mai, Jianqiong Wang
• Citations: 9 (Details)

• Simultaneous Determination of Ultraviolet Absorbers and Antibacterial Agents in Textiles by Ultra-High Performance Liquid Chromatography/Orbitrap High Resolution Mass Spectrometry, World Journal of Engineering and Technology, Vol.5 No.1B, 2017
• Chengyun Wang, Tangtang Xie, Rong Xu, Junfeng Lin, Lixia Li
• Citations: 9 (Details)

• Potentials and Constraints of Small-Scale Livestock Productions in Cambodia, World Journal of Engineering and Technology, Vol.5 No.2B, 2017
• Siek Darith, Shiwei Xu, Wen Yu, Ahmed Abdul-Gafar, Sa Kennvidy, Ou Ratanak, Eric Mukeba Mbala
• Citations: 9 (Details)

• Developments of Gussasphalt System on Steel Deck Pavement, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Min Wang, Deyong Hu, Li Xiao, Fei Shang
• Citations: 9 (Details)

• Research on the Application of Space Syntax in Urban Planning, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Xi Chen
• Citations: 9 (Details)

• Research on Lightweight Design of Automobile Lower Arm Based on Carbon Fiber Materials, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Zengfeng Song, Xiaoyu Zhao
• Citations: 9 (Details)

• Research of Lightweight Composite Automobile Wheel, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Yue Bao, Xiaoyu Zhao
• Citations: 8 (Details)

• Investigation of Semi-Active Hydro-Pneumatic Suspension for a Heavy Vehicle Based on Electro-Hydraulic Proportional Valve, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Wenchao Yue, Shoucheng Li, Xiaojun Zou
• Citations: 8 (Details)

• Experimental Investigation of Laser Welding Process in Butt-Joint Configurations, World Journal of Engineering and Technology, Vol.5 No.1, 2017
• Laurent Jacques, Abderrazak El Ouafi
• Citations: 8 (Details)

• Reduction in the Corrosion Rate of Magnesium and Magnesium Alloy Specimens and Implications for Plain Fully Bioresorbable Coronary Artery Stents: A Review, World Journal of Engineering and Technology, Vol.4 No.4, 2016
• Gladius Lewis
• Citations: 8 (Details)

• Cerium Separation from Light Rare Earth Concentrate by Liquid-Liquid Extraction, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Thiago Silveira Formiga, Carlos Antonio de Morais
• Citations: 8 (Details)

• Deepwater Horizon Oil Spill as a Case Study for Interdisciplinary Cooperation within Developmental Biology, Environmental Sciences and Physiology, World Journal of Engineering and Technology, Vol.3 No.4C, 2015
• Warren Burggren, Benjamin Dubansky, Aaron Roberts, Matthew Alloy
• Citations: 8 (Details)

• Towards Autonomous Vehicles with Advanced Sensor Solutions, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Matti Kutila, Pasi Pyykönen, Aarno Lybeck, Pirita Niemi, Erik Nordin
• Citations: 8 (Details)

• Atmospheric Remnants in the Low Earth Orbit Region around 200 km Altitude, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Konstantinos Katsonis, Chloe Berenguer, José Gonzalez del Amo, Constantinos Stavrinidis
• Citations: 8 (Details)

• Characterization of a 5 Litre Continuous Stirred Tank Reactor, World Journal of Engineering and Technology, Vol.3 No.2, 2015
• Philomena K. Igbokwe, Joseph T. Nwabanne, Samuel Wadzani Gadzama
• Citations: 8 (Details)

• Axial Load Capacity of Cast in Place Piles from SPT and CPTU Data, World Journal of Engineering and Technology, Vol.2 No.2, 2014
• Ergys Anamali, Neritan Shkodrani, Luisa Dhimitri
• Citations: 8 (Details)

• Investigating Improved Oil Recovery in Heavy Oil Reservoirs, World Journal of Engineering and Technology, Vol.2 No.1, 2014
• Yogesh Kumar Suman, Ezeddin Shirif, Hussameldin Ibrahim, Abdulsalam Ala-Ktiwi
• Citations: 8 (Details)

• Experimental Investigation of Progressive Collapse of Steel Frames, World Journal of Engineering and Technology, Vol.1 No.3, 2013
• Kamel Sayed Kandil, Ehab Abd El Fattah Ellobody, Hanady Eldehemy
• Citations: 8 (Details)

• Wake-Up-Word Feature Extraction on FPGA, World Journal of Engineering and Technology, Vol.2 No.1, 2014
• Veton Z. Këpuska, Mohamed M. Eljhani, Brian H. Hight
• Citations: 8 (Details)

• Summary of Application of Fuzzy Mathematics in Construction Project Management, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Dongyou Tong, Yueming Wang
• Citations: 8 (Details)

• Bureaucratic Factors Impeding the Delivery of Infrastructure at the Metropolitan Municipal and District Assemblies (MMDAs) in Ghana, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Joe Kingsley Hackman, Joshua Ayarkwa, Dickson Osei-Asibey, Alex Acheampong, Prince Asher Nkrumah
• Citations: 8 (Details)

• The Combination of BIM Technology with the Whole Life Cycle of Green Building, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Lili Pu, Yueming Wang
• Citations: 8 (Details)

• Influence of Building Information Modelling (BIM) on Engineering Contract Management in Nairobi, Kenya, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Hellen Nyaboke Mosse, Mugwima Njuguna, Charles Kabubo
• Citations: 8 (Details)

• Effects of Quality and Quantity of Information Processing on Design Coordination Performance, World Journal of Engineering and Technology, Vol.6 No.2B, 2018
• R. Zhang, A. M. M. Liu, I. Y. S. Chan
• Citations: 8 (Details)

• Multiple-Objective Optimization and Design of Series-Parallel Systems Using Novel Hybrid Genetic Algorithm Meta-Heuristic Approach, World Journal of Engineering and Technology, Vol.6 No.3, 2018
• Essa Abrahim Abdulgader Saleem, Thien-My Dao, Zhaoheng Liu
• Citations: 8 (Details)

• Permittivity Measurement of Low-Loss Substrates Based on Split Ring Resonators, World Journal of Engineering and Technology, Vol.5 No.4B, 2017
• Jianyi Li
• Citations: 8 (Details)

• A Comprehensive Combination of Apparent and Shear Viscoelastic Data during Polymer Flooding for EOR Evaluations, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Muhammad Tahir, Rafael E. Hincapie, Michael Be, Leonhard Ganzer
• Citations: 8 (Details)

• Research of Three-Phase Unbalanced Treatment in Low-Voltage Distribution Network Based on New Commutation Switch, World Journal of Engineering and Technology, Vol.7 No.4B, 2019
• Xue Liu, Jun Jia, Jian Wang
• Citations: 8 (Details)

• Study of Factors Causing Time and Cost Overrun in Pre-Construction Project (A Case Study of Malaysia), World Journal of Engineering and Technology, Vol.8 No.1, 2020
• Muhammad Ilyas, Jing Li, Irfan Ullah
• Citations: 8 (Details)

• Research on Logistics Demand Forecast in Southeast Asia, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Thi Yen Nguyen
• Citations: 8 (Details)

• Structural Condition and Deficiencies of Present Constructed Bridges over Zahirshahi Canal and Proposal of New Design Using AASHTO Codes, World Journal of Engineering and Technology, Vol.7 No.2, 2019
• Abdul Khaliq Karimi, Abdul Bari Jaheed, Bashir Ahmad Aasim, Javed Ahmad Farooqi
• Citations: 8 (Details)

• Helix Angle Effect on the Helical Gear Load Carrying Capacity, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Mehmet Bozca
• Citations: 7 (Details)

• Thermoelectric Energy Conversion of a Drinking Bird by Disk-Magnet Electromagnetic Induction, World Journal of Engineering and Technology, Vol.8 No.2, 2020
• Hiroshi Uechi, Schun T. Uechi
• Citations: 7 (Details)

• Perceived Benefits of Using Value Engineering on Road Projects in Ghana, World Journal of Engineering and Technology, Vol.8 No.2, 2020
• James Cofie Danku, Philip Agyekum Antwi
• Citations: 7 (Details)

• An Introduction to Architecture of Nasir Al-Mulk Mosque, World Journal of Engineering and Technology, Vol.7 No.4, 2019
• Azin Ehteshami, Mehdi Soltaninejad
• Citations: 7 (Details)

• The Analysis of Thermomechanical Periodic Motions of a Drinking Bird, World Journal of Engineering and Technology, Vol.7 No.4, 2019
• Schun T. Uechi, Hiroshi Uechi, Akihiko Nishimura
• Citations: 7 (Details)

• Aerodynamics and Flight Dynamics of Free-Falling Ash Seeds, World Journal of Engineering and Technology, Vol.5 No.4B, 2017
• Rui Fang, Yanlai Zhang, Yanpeng Liu
• Citations: 7 (Details)

• Research on Geometric Errors Measurement of Machine Tools Using Auto-Tracking Laser Interferometer, World Journal of Engineering and Technology, Vol.6 No.3, 2018
• Jr-Rung Chen, Bing-Lin Ho, Hau-Wei Lee, Shan-Peng Pan, Tsung-Han Hsieh
• Citations: 7 (Details)

• Design Analysis of a Lightweight Solar Powered System for Recreational Marine Craft, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Daniel Tamunodukobipi, Nitonye Samson, Adumene Sidum
• Citations: 7 (Details)

• Cybersecurity for Allied Future Submarines, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Keith F. Joiner, Simon Reay Atkinson, Pete Christensen, Elena Sitnikova
• Citations: 7 (Details)

• Aspects of the Powder in Metal Additive Manufacturing: A Review, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Gladius Lewis
• Citations: 7 (Details)

• Design and Simulation by HFSS of a Slim UWB PIFA Antenna, World Journal of Engineering and Technology, Vol.1 No.2, 2013
• Abdelhakim Elouadih, Ahmed Oulad-Said, Moha Mrabet Hassani
• Citations: 7 (Details)

• Land Development on High Land Areas: Comparison of Process Implementation and Legislation Effectiveness between Malaysia and Hong Kong, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Anuar Bin Alias, Azlan Shah Ali, Khairul Nizam Othman
• Citations: 7 (Details)

• Liquefaction-Induced Ground Deformations Evaluation Based on Cone Penetration Tests (CPT), World Journal of Engineering and Technology, Vol.2 No.4, 2014
• Alketa Ndoj, Neritan Shkodrani, Veronika Hajdari
• Citations: 7 (Details)

• Assessment of Physical Vulnerability in Santo Domingo De Heredia, Costa Rica, Central America, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Jonnathan Reyes Cháves, Mario Fernández Arce, Daniel Solís, Rafael Bolaños Villalobos
• Citations: 7 (Details)

• Finite Element Modeling of Stamp Forming Process on Thermoplastic-Based Fiber Metal Laminates at Elevated Temperatures, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Xiaocen Dou, Sivakumar Dhar Malingam, Jae Nam, Shankar Kalyanasundaram
• Citations: 7 (Details)

• Microstructure and Mechanical Properties of NiTi₂-TiB Composite Fabricated by Spark Plasma Sintering, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Masashi Yoshida, Hideo Shiraishi, Naoya Ikki
• Citations: 7 (Details)

• Behaviour of Reinforced Concrete Columns Strengthened with Ferrocement under Compression Conditions: Experimental Approach, World Journal of Engineering and Technology, Vol.4 No.4, 2016
• Adnan Al-Sibahy
• Citations: 7 (Details)

• Parametric Study on a Caisson Based OWC Wave Energy Converting System, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Hsien Hua Lee, Y.-F. Chiu, C.-Y. Lin, C.-H. Chen, M.-H. Huang
• Citations: 7 (Details)

• Design and Optimization of the Geometric Properties of a Crane Hook, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• Niranjan Desai, Nuri Zeytinoglu
• Citations: 7 (Details)

• Comparative Study of Different Materials with Al-Sic for Engine Valve Guide by Using FEM, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Hemendra Kumar Srivastava, Arurendra Singh Chauhan, Manmohan Kushwaha, Amaan Raza, Prashantkr Bhardwaj, Vaibhav Raj
• Citations: 7 (Details)

• Analysis of High-Power Diode Laser Heating Effects on HY-80 Steel for Laser Assisted Friction Stir Welding Applications, World Journal of Engineering and Technology, Vol.5 No.1, 2017
• Maxwell Wiechec, Brad Baker, Terry McNelley, Manyalibo Matthews, Alexander Rubenchik, Mark Rotter, Ray Beach, Sheldon Wu
• Citations: 7 (Details)

• Study of Stiffness of Linear Guide Pairs by Experiment and FEA, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Azhar Shaukharova, Yi Liang, Hutian Feng, Bin Xu
• Citations: 7 (Details)

• Study on the Effect of Production Parameters and Raw Materials Used on the Mechanical Properties of Leaded Brass (CuZn40Pb2) Alloy, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Abdulsalam A. Fadhil, Tawakol A. Enab, Magdy Samuel, Berlanty A. Iskander, Sami A. Ajeel
• Citations: 7 (Details)

• Reflections on Long-Term Development and Use of Automated Scoring Technology in a Sport (Modified Boxing) Context, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Paul Perkins, Richard J. N. Helmer, Colin Mackintosh, Allan G. Hahn
• Citations: 7 (Details)

• Research on the Evaluation of Urban Open Data, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Yue Liu, Chenyu Jiang, Su Li
• Citations: 6 (Details)

• Assessment of Microbial Communities and Their Relationship with Enzymatic Activity during Composting, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Khoshrooz Kazemi, Baiyu Zhang, Leonard M. Lye
• Citations: 6 (Details)

• Study on Food Import in D. R. Congo, World Journal of Engineering and Technology, Vol.5 No.2B, 2017
• Mukeba Mbala Eric, Shiwei Xu, Wen Yu, Shengwei Wang, Abdul-Gafar Ahmed, Siek Darith, Mujinga Bukasa Eliane
• Citations: 6 (Details)

• Amino Acid Requirements of Gilthead Bream (Sparus aurata) Juveniles, World Journal of Engineering and Technology, Vol.4 No.3B, 2016
• M. M. Gaber, M. El-S. Salem, M. A. Zaki, A. M. Nour
• Citations: 6 (Details)

• Resistance and Seakeeping Investigation for Optimization of the Floating Hull of Wave Glider, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Alaaeldeen M. E. Ahmed, Wenyang Duan
• Citations: 6 (Details)

• Study on Synchronous Generator Excitation Control Based on FLC, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Zhiting Guo, Hong Song, Penggao Wen, Zhizheng Fan
• Citations: 6 (Details)

• Estimating and Plotting of Groundwater Quality Using WQI _UA and GIS in Assiut Governorate, Egypt, World Journal of Engineering and Technology, Vol.4 No.1, 2016
• Mohamed R. El Tahlawi, Mohamed Abo-El Kassem, Gamal. Y. Baghdadi, Hussein A. Saleem
• Citations: 6 (Details)

• An Improved Iterative Closest Points Algorithm, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Hao Yang, Jialan Jiang, Guowei Zhao, Jie Zhao
• Citations: 6 (Details)

• Atmospheric Ice Accretion on Non-Rotating Vertical Circular Cylinder, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Muhammad S. Virk, Umair N. Mughal, Geanette Polanco
• Citations: 6 (Details)

• Flow Characteristics and Cavitation Effect of the Submerged Water Jet Discharged from a Central-Body Nozzle, World Journal of Engineering and Technology, Vol.2 No.4, 2014
• Haixia Liu, Qiming Shao, Can Kang
• Citations: 6 (Details)

• Influence of Heating Time of Shea Nuts (vitellariaparadoxa) on Some Chemical Properties of Shea Butter, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• V. T. Tame, I. Hassan, D. T. Gungula
• Citations: 6 (Details)

• Design Solutions for Jack up Platform Retrofitting, World Journal of Engineering and Technology, Vol.3 No.3, 2015
• Ionel Chirica, Dumitru Lupascu, Elena-Felicia Beznea
• Citations: 6 (Details)

• Sustained Deficit Irrigation and Mulching on Growth of Sourani Olive Trees in Kuwait, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• A. Al-Shatti, Habibah S. Al-Menaie
• Citations: 6 (Details)

• A Lumped-Parameter Model for Nonlinear Waves in Graphene, World Journal of Engineering and Technology, Vol.3 No.2, 2015
• Hamad Hazim, Dongming Wei, Mohamed Elgindi, Yeran Soukiassian
• Citations: 6 (Details)

• The Application of Bamboo Network Reinforcement Technology on Hydraulic Fill Soft-Soil Foundation Treatment, World Journal of Engineering and Technology, Vol.2 No.2, 2014
• Man Yuan, Jihui Ding, Yanliang Cao
• Citations: 6 (Details)

• Investigations on Structural Safety of Office Room Based on Fire Simulation and Transient Heat Transfer Analysis, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Ah Young An, Eun Mi Ryu, Hee Sun Kim
• Citations: 6 (Details)

• Machine Design Approach to Bone Waste Utilization in Slaughterhouses of Developing Countries with Focus on Nigeria, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Ayodele James Oyejide, Sunday Olufemi Adetola, Augustine Lawal
• Citations: 6 (Details)

• Automobile Crash Investigation Based on Vehicle System Related Causes: Systematic Literature Review, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Awa Terence Achiri, Innocent Ndoh Mbue, Ayissi Merlin, Azeh Gerard
• Citations: 6 (Details)

• Classification of Various Bottled Mineral Waters Marketed in Djibouti, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Elmi Idil Mouhoumed, Mohamed Mohamed-awal Abdillahi, Yacin Mouhoumed Elmi, Choukri Osman Doubad, Egueh Abdoul-Nasser Dirieh
• Citations: 6 (Details)

• Microstructures and Mechanical Properties of Al-Zn-Sn Bearing Alloys for High Performance Applications, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Nermin Ali Abdelhakim, Rizk Mostafa Shalaby
• Citations: 6 (Details)

• Nanotechnology as a Sustainable Approach for Achieving Sustainable Future, World Journal of Engineering and Technology, Vol.9 No.4, 2021
• Nora Mohammed Rehan
• Citations: 6 (Details)

• A Systematic Review of Excessive Speed Monitoring and Control System for Accident Prevention on Cameroon Highways, World Journal of Engineering and Technology, Vol.10 No.1, 2022
• Azeh Gerald, Innocent Ndoh Mbue, Ayissi Zacharie Merlin, Awa Terence Achiri
• Citations: 6 (Details)

• High-Speed Active Release End-Effector Motions for Precise Positioning of Adhered Micro-Objects, World Journal of Engineering and Technology, Vol.6 No.1, 2018
• Eunhye Kim, Masaru Kojima, Kazuto Kamiyama, Mitsuhiro Horade, Yasushi Mae, Tatsuo Arai
• Citations: 6 (Details)

• Effects of Stone Cutting Powder (Al-Khamkha) on the Properties of Self-Compacting Concrete, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Manal O. Suliman, Hesham Alsharie, Yasser I. O. Yahia, Talal Masoud
• Citations: 6 (Details)

• Structural Design of an Electrically Erasable EEPROM Memory Cell, World Journal of Engineering and Technology, Vol.8 No.2, 2020
• Lei Zhao
• Citations: 6 (Details)

• Non-Isothermal Crystallization Kinetics of a Rapidly Solidified as-Cast TiZrHfNiCu High Entropy Bulk Metallic Glass, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Norhuda Hidayah Nordin, Faiz Syazwan Mohamad, Nur Ayuni Jamal
• Citations: 6 (Details)

• Ship Maintenance and Repair Services in the Tema Drydock and Shipbuilding Yard in Ghana: Some Challenges, Opportunities and Prospects, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Nicholas Nchor Kambase
• Citations: 6 (Details)

• Black Powder in Sales Gas Pipelines: Sources and Technical Recommendations, World Journal of Engineering and Technology, Vol.8 No.1, 2020
• Faisal Saleh Al Wahedi, Mohammed Hameed Saleh, Zin Eddine Dadach
• Citations: 6 (Details)

• The “Static” and “Dynamic” Design Verification Stages of the Lean Development Process: Automotive Industry, World Journal of Engineering and Technology, Vol.8 No.1, 2020
• F. Ali Paker
• Citations: 6 (Details)

• Gender Discrimination in Building Construction Industry in Nigeria: Threat to Achieving Goal-5 of Vision 2030, World Journal of Engineering and Technology, Vol.8 No.1, 2020
• Shirka Kassam Jwasshaka, Nor Fadila Amin
• Citations: 6 (Details)

• Design and Assembly of an Improvised Logic Gates Simulator, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Ramil B. Arante
• Citations: 6 (Details)

• Mechanical Characterization and Measurement of the Damage of Pericopsis elata (Assamela), World Journal of Engineering and Technology, Vol.7 No.2, 2019
• Ulrich Gael Azeufack, Bienvenu Kenmeugne, Emmanuel Foadieng, Martial Fouotsa, Pierre Kisito Talla, M. Fogue
• Citations: 5 (Details)

• Experimental Study on Influencing Factors of Resistance Coefficient and Residual Resistance Coefficient in Oilfield Z, World Journal of Engineering and Technology, Vol.7 No.2, 2019
• Xinran Wang, Lizhen Ge, Dong Liu, Qin Zhu, Bin Zheng
• Citations: 5 (Details)

• Study on Productivity Model of Herringbone-Like Laterals Wells and Optimization of Morphological Parameters Considering Threshold Pressure Gradient in Heavy Oil Reservoirs, World Journal of Engineering and Technology, Vol.7 No.2, 2019
• Enhui Sun, Jie Tan, Dong Zhang, Wei Wang, Songru Mu
• Citations: 5 (Details)

• Comparative Study Using the 2-Hydrological Models with the Global Weather in a Small Watershed, a Case Study in the Upper Tha Chin River Basin, Thailand, World Journal of Engineering and Technology, Vol.7 No.2B, 2019
• Sombat Chuenchooklin, Udomporn Pangnakorn, Puripus Soonthornnonda
• Citations: 5 (Details)

• Development of a Microcontroller Based DC Motor Speed Control System, World Journal of Engineering and Technology, Vol.7 No.4, 2019
• O. O. Adejumo, W. A. Azeez
• Citations: 5 (Details)

• Some Technical Solutions for Environmental Protection System during Accidents at Nuclear Power Plants, World Journal of Engineering and Technology, Vol.5 No.4B, 2017
• Sergey A. Kulyukhin, Igor’ A. Rumer, Viktor M. Berkovich, Gennadii S. Taranov, Ivan V. Yagodkin, Viktor P. Osipov, Sergey S. Skvortsov, Leo N. Falkovskii
• Citations: 5 (Details)

• Effect of PWHT with Sheet-Type Ceramic Heater on Compressive Behaviors of Non-Stiffened Welded Steel Box Columns, World Journal of Engineering and Technology, Vol.6 No.1, 2018
• May Phyo Aung, Mikihito Hirohata
• Citations: 5 (Details)

• A State of the Art Review on the Behavior of Reinforced Concrete (RC) Beams under Cyclic Loading, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Bashir H. Osman
• Citations: 5 (Details)

• A Study of Structure, Thermal and Mechanical Properties of Free Machining Al-Zn-Sn-Bi Alloys Rapidly Solidified from Molten State, World Journal of Engineering and Technology, Vol.6 No.3, 2018
• Nermin Ali Abdelhakim, Rizk Mostafa Shalaby, Mustafa Kamal
• Citations: 5 (Details)

• A Data-Driven Car-Following Model Based on the Random Forest, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Huili Shi, Tingli Wang, Fusheng Zhong, Hanqing Wang, Junyan Han, Xiaoyuan Wang
• Citations: 5 (Details)

• Asset Integrity Management in Mitigating Oil and Gas Pipeline Vandalism in the Niger Delta Region—Deep Burial Solution, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Augustine E. Agomuoh, Chinwuba V. Ossia, Frankline O. Chukwuma
• Citations: 5 (Details)

• Design of Digital Circuit Experiment Course Based on FPGA, World Journal of Engineering and Technology, Vol.9 No.2, 2021
• Lei Zhao
• Citations: 5 (Details)

• Logistics Management in the Ghanaian Construction Industry, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Boateng Leslie Appiah
• Citations: 5 (Details)

• Comparative Study on Tribological Behavior of Graphene/Polyimide and Carbon Fibers/Polyimide Composites: A Review, World Journal of Engineering and Technology, Vol.9 No.1, 2021
• Niyobuhungiro Daniel, Hong Liu
• Citations: 5 (Details)

• Trend Analysis of Large-Scale Twitter Data Based on Witnesses during a Hazardous Event: A Case Study on California Wildfire Evacuation, World Journal of Engineering and Technology, Vol.9 No.2, 2021
• Syed A. Morshed, Khandakar Mamun Ahmed, Kamar Amine, Kazi Ashraf Moinuddin
• Citations: 5 (Details)

• Relationship between Project Consultants’ Performance and Project Success in the Rwandan Construction Industry, World Journal of Engineering and Technology, Vol.9 No.1, 2021
• Elysé Masengesho, Ji Wei, Rosette Niyirora, Nadine Umubyeyi
• Citations: 5 (Details)

• Overview of Industrial Materials Detection Based on Prompt Gamma Neutron Activation Analysis Technology, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Jiawen Fan, Jie Xu, Changming Wang
• Citations: 5 (Details)

• Rock Slope Stability Analysis by Using Integrated Approach, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Dyson Moses, Hideki Shimada, Takashi Sasaoka, Akihiro Hamanaka, Tumelo K. Dintwe, Sugeng Wahyudi
• Citations: 5 (Details)

• Consumer Acceptance and Physicochemical Properties of Developed Carambola (Averrhoa carambola) Candy, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Most. Jesmin Akhter, Md. Mojaffor Hosain, Md. Abdul Halim, Mehar Prabin, Shanaz Parvin, Ayesha Siddika, Fatehatun Noor, Md. Al-Amin
• Citations: 5 (Details)

• Effect of Some Environmental Factors on Incidence and Severity of Angular Leaf Spot of Cotton in Yola and Mubi, Adamawa State, Nigeria, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• N. Z. Tuti, H. Nahunnaro, K. Ayuba
• Citations: 5 (Details)

• Encapsulated Water Hammer: Theoretical/Experimental Study, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Geanette Polanco, Muhammad Shakeel Virk, Umair N. Mughal, Sojo Victor, Da Paixao José, Vidal Antonio, Aguillón Orlando
• Citations: 5 (Details)

• Diagnostics of Air-Breathing Electric Thrusters, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Constantinos Stavrinidis, José Gonzalez del Amo, Chloe Berenguer, Konstantinos Katsonis
• Citations: 5 (Details)

• Simulation Study on Series Capacitor Compensation to Improve the Voltage Quality of Rural Power Distribution Network, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Hongqiang Li, Feng Gao, Xutao Li, Shaogui Ai, Shuang Zhang, Bei Tian
• Citations: 5 (Details)

• Assessment of Seagoing Ships Longitudinal Strength in the Context of International Rules, Important Factor for Safe Operation, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Dumitru Lupascu, Ionel Chirica
• Citations: 5 (Details)

• Cutting and Welding of High-Strength Steels Using Non-Vacuum Electron Beam as a Universal Tool for Material Processing, World Journal of Engineering and Technology, Vol.4 No.4, 2016
• Thomas Hassel, Nils Murray, Georgii Klimov, Alexander Beniyash
• Citations: 5 (Details)

• Methodology for the Study of the Quality of CFRP Dry Drilling Based on Macrogeometrical and Dimensional Deviations, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• J. Salguero, S. R. Fernandez-Vidal, P. Mayuet, J. M. Vazquez-Martinez, M. Alvarez, M. Marcos
• Citations: 5 (Details)

• Analysis of Water Pipeline Breaks, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Chris Samba, Malick Baldeh, Kenneth Tuffour
• Citations: 5 (Details)

• Designing of Hot Strip Rolling Mill Control System, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• Yajun Wu
• Citations: 5 (Details)

• Design and Development of Innovative Highland Water Filtration System, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• Mohd Hudzari Razali, Syazili Roslan, Abdus Ssomad M. Abd Halim, Ahmad Farizal Md. Shokeri, Nur Azuan Husin
• Citations: 5 (Details)

• Minimum Curve Radii for High-Speed Trains, Including the Gyroscopic Moments of the Wheels, World Journal of Engineering and Technology, Vol.5 No.1, 2017
• Ronald L. Huston
• Citations: 5 (Details)

• A Finite Element Model to Investigate the Impact of Torch Angle on an Autogenous TIG Welding Process, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Richard Turner
• Citations: 5 (Details)

• Research on the Seepage Safety Monitoring Indexes of the High Core Rockfill Dam, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Bo Chen, Li Zhang, Qiupei Qian, Yanhong Dou, Zhuohao Ji
• Citations: 4 (Details)

• Vision-Based Vehicle Detection for a Forward Collision Warning System, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Din-Chang Tseng, Ching-Chun Huang
• Citations: 4 (Details)

• XRD Doping Control of Light-Emitting cBN with a Large Size Mismatch between the Dopant and Intrinsic Atoms, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• E. M. Shishonok, V. G. Luhin, J. W. Steeds
• Citations: 4 (Details)

• Effect of Carbon Price Floor on Levelised Cost of Gas-Fired Generation Technology in the UK, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Tianxiang Luan, Kwoklum Lo
• Citations: 4 (Details)

• Applicability Evaluation of a Laser Light-Mater Interaction Based Computational Tool on Status Identification of Applied Micro-Structured Coatings, World Journal of Engineering and Technology, Vol.5 No.1, 2017
• Mauricio Zadra Pacheco, Daniel Vriesman, Hauke Brüning, Kai Brune, Welchy Leite Cavalcanti, Bernd Mayer
• Citations: 4 (Details)

• Research of Dyeing Thermodynamics and Supramolecular Structure of Luteolin on Wool Fabric, World Journal of Engineering and Technology, Vol.5 No.1B, 2017
• Can Chen, Wei Zhao, Wen Liu, Yuan Zhang, Huimin Tang, Dequan Xu, Chunling Zheng
• Citations: 4 (Details)

• Finite Element Analysis and Test of an Ultrasonic Compound Horn, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Hongbing Wang, Chunhua Sun
• Citations: 4 (Details)

• Assessment of Site Parameters and Heat Recovery Characteristics on Combined Cycle Performance in an Equatorial Environment, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Sidum Adumene, Samson Nitonye
• Citations: 4 (Details)

• Prototype Road Surface Management System, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Azad Abdulhafedh
• Citations: 4 (Details)

• The Growth of Two Species of Subalpine Co-nifer Saplings in Response to Soil Warming and Inter-Competition in Mt. Gongga on the South-Eastern Fringe of the Qinghai-Tibetan Plateau, China, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• Hongtao Song, Song Cheng, Yinsheng Zhang
• Citations: 4 (Details)

• Review of Methods to Calculate Congestion Cost Allocation in Deregulated Electricity Market, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Jiawei Zhao, Jianfeng Lu, Kwok Lun Lo
• Citations: 4 (Details)

• Optimal Control and Bidding Strategy of Virtual Power Plant with Renewable Generation, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Yuchang Kang, Kwoklun Lo
• Citations: 4 (Details)

• Post-Buckling Behavior of Laminated Composite Cylindrical Shells Subjected to Axial, Bending and Torsion Loads, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Yengula Venkata Narayana, Jagadish Babu Gunda, Ravinder Reddy Pinninti, Markandeya Ravvala
• Citations: 4 (Details)

• The Effects of Growth Performance and Organosomatic Indices of Atlantic Salmon Juvenile by Using Different Carbohydrate-to-Lipid Ratios in Feeds, World Journal of Engineering and Technology, Vol.3 No.4C, 2015
• Jinghui Li, Lin Ma, Zhenyan Cheng, Dongqing Bai, Xiuting Qiao, Jinhui Sun
• Citations: 4 (Details)

• Non-Contact Velocity Measurement of Japanese Cedar Columns Using Air-Coupled Ultrasonics, World Journal of Engineering and Technology, Vol.4 No.1, 2016
• Masumi Hasegawa, Misaki Mori, Junji Matsumura
• Citations: 4 (Details)

• Automatic Modification of Local Drilling Holes via Double Pre-Assembly Holes, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Qiubai Yan, Wenliang Chen
• Citations: 4 (Details)

• Role of Surface Roughness during Natural Convection, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• M. Yousaf, S. Usman
• Citations: 4 (Details)

• A New Type of Bridge, Mobilebridge® to Super-Quickly Recover a Bridge, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Ichiro Ario, Yuki Chikahiro
• Citations: 4 (Details)

• GDOP’s Influence on Observable Degree of Multi-Antenna GPS/SINS Integrated Attitude Measuring System, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Hao He, Yuhang Zheng, Dongfang Yang, Jinsheng Zhang, Shicheng Wang
• Citations: 4 (Details)

• Seismic Soil Liquefaction for Deterministic and Probabilistic Approach Based on in Situ Test (CPTU) Data, World Journal of Engineering and Technology, Vol.3 No.2, 2015
• Shpresa Gashi, Neritan Shkodrani
• Citations: 4 (Details)

• Strain Rate Effect on the Response of Blast Loaded Reinforced Concrete Slabs, World Journal of Engineering and Technology, Vol.2 No.4, 2014
• Kamel S. Kandil, Mouhamad T. Nemir, Ehab A. Ellobody, Ramy I. Shahin
• Citations: 4 (Details)

• Implicit and Explicit Analysis of the Response of Blast Loaded Reinforced Concrete Slabs, World Journal of Engineering and Technology, Vol.2 No.3, 2014
• Kamel S. Kandil, Mouhamad T. Nemir, Ehab A. Ellobody, Ramy I. Shahin
• Citations: 4 (Details)

• Contribution to the Optimization of the Transient Stability of an Electric Power Transmission Network Using a Universal Power Flow Compensator Controlled by a Three-Stage Inverter, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Koko Koko Joseph, Nneme Nneme Léandre, Ndjakomo Essiane Salomé
• Citations: 4 (Details)

• A New Two-Parameter Heteromorphic Elliptic Equation: Properties and Applications, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Zhouhu Wu
• Citations: 4 (Details)

• Chimney Height, a Determining Factor in the Dispersion of Pollutants and Their Concentration, World Journal of Engineering and Technology, Vol.9 No.1, 2021
• Neyva Maria Lopes Romeiro, Eliandro Rodrigues Cirilo, Paulo Laerte Natti, Letícia Mayumi Doy Okamoto, Tainá Julianotti
• Citations: 4 (Details)

• Weld Seam Deviation Prediction of Gas Metal Arc Welding Based on Arc Sound Signal, World Journal of Engineering and Technology, Vol.9 No.1, 2021
• Wang Zhao, Jianfeng Yue, Wenji Liu, Haihua Liu
• Citations: 4 (Details)

• Damage Evaluation of Two Equatorial Hardwoods under Uniaxial Compression: Case of Entandrophragma cylindricum (Sapelli) and Chlorophora exelcia (Iroko), World Journal of Engineering and Technology, Vol.7 No.4, 2019
• Thierry Fothe, Ulrich Gael Azeufack, Bienvenu Kenmeugne, Pierre Kisito Talla, Médard Fogue
• Citations: 4 (Details)

• Research on Influencing Factors of Reservoir Construction Risk Based on Interpretative Structural Modeling, World Journal of Engineering and Technology, Vol.9 No.4, 2021
• Wang Xin, Yueming Wang
• Citations: 4 (Details)

• Exploring the “Green” Transformation Planning of Industrial Parks in the Era of Low Carbon Economy, World Journal of Engineering and Technology, Vol.9 No.4, 2021
• Caijuan Liang
• Citations: 4 (Details)

• Classification Study on Relative Permeability Curves, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Pingzhi Gong, Bin Liu, Junting Zhang, Zheng Lv, Guohao Zhang
• Citations: 4 (Details)

• Management and Agricultural Technology Affecting to Longan Security in Thailand, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Apichart Sudswang, Sudawan Somjai, Sriparinya Toopgrajank
• Citations: 4 (Details)

• Design of a Novel Semi-Automatic Coconut Tree Climbing Device, World Journal of Engineering and Technology, Vol.6 No.3B, 2018
• Yongfeng Liu, Jie Gong, Yanyun Lin, Fan Zhang, Hui Huang, Wen Xia, Yijun Liu, Yunfei Fu
• Citations: 4 (Details)

• The Feasibility Research on Distribution Network Closed Loop Based on the Load Transfer Model, World Journal of Engineering and Technology, Vol.5 No.4B, 2017
• Qi Yin, Rui Ding, Yongchun Zhao, Yanfen Liu, Xiaolin Liu
• Citations: 4 (Details)

• Design and Research of Active Heave Compensation System Based on Laser Ranging Sensor, World Journal of Engineering and Technology, Vol.8 No.1, 2020
• Chongyang Han
• Citations: 4 (Details)

• Open Building as a Design Approach for Adaptability in Chinese Public Housing, World Journal of Engineering and Technology, Vol.7 No.4, 2019
• Guopeng Li, Zhubin Li, Yanbing Li
• Citations: 4 (Details)

• Study of External Characteristics of Hydraulic Electromagnetic Regenerative Shock Absorber, World Journal of Engineering and Technology, Vol.7 No.3, 2019
• Muhammad Yousaf Iqbal, Zhifei Wu, Guangzhao Xu, Syed Arslan Bukhari
• Citations: 4 (Details)

• Comparative Appraisal of Response Surface Methodology and Artificial Neural Network Method for Stabilized Turbulent Confined Jet Diffusion Flames Using Bluff-Body Burners, World Journal of Engineering and Technology, Vol.8 No.1, 2020
• Tahani S. Gendy, Salwa A. Ghoneim, Amal S. Zakhary
• Citations: 4 (Details)

• Lance Design for Argon Bubbling in Molten Steel, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Servando De la Cruz, Miguel A. Barron, Dulce Y. Medina, Joan Reyes
• Citations: 4 (Details)

• Development Trend of NC Machining Accuracy Control Technology for Aeronautical Structural Parts, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Qingchun Xiong, Qinghua Zhou
• Citations: 4 (Details)

• Evaluation Model of Emergency Evacuation Capacity of Subway Station Based on Grounded Theory, World Journal of Engineering and Technology, Vol.7 No.2B, 2019
• Lianhua Cheng, Yuhang Gao
• Citations: 4 (Details)

• Quantitative Characterization and Dynamic Law of Interlayer Interference for Multilayer Commingled Production in Heavy Oil Reservoirs by Numerical Simulation, World Journal of Engineering and Technology, Vol.7 No.3, 2019
• Dong Liu, Fengyi Zhang, Qin Zhu, Xinran Wang, Jing Fan
• Citations: 4 (Details)

• Response Surface Modeling of Fuel Rich and Fuel Lean Catalytic Combustion of the Stabilized Confined Turbulent Gaseous Diffusion Flames, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Tahani S. Gendy, Salwa A. Ghoneim, Amal S. Zakhary
• Citations: 4 (Details)

• Analysis of the Factors for Displacement of Earth Retaining Wall with Twin-Stepped Construction, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Seiya Sakuma, Kazuki Maehara, Takahiro Funatsu, Akihiro Hamanaka, Takashi Sasaoka, Hideki Shimada
• Citations: 3 (Details)

• Plasma-Electrolysis of Dinitrophenol in Gas-Liquid Boundary and Interpretation Using Molecular Orbital Theory, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Hiroshi Okawa, Hiroki Kuroda, Keiko Hirayama-Katayama, Shin-Ichiro Kojima, Tetsuya Akitsu
• Citations: 3 (Details)

• Finite Element Analysis of Thiopave Modified Asphalt Pavement, World Journal of Engineering and Technology, Vol.7 No.2B, 2019
• Xiushan Wang, Junjie Wang, Yangjie Qiu
• Citations: 3 (Details)

• Experimental Study on Chloride Ion Penetration Resistance of Coal Gangue Concrete under Multi-Factor Comprehensive Action, World Journal of Engineering and Technology, Vol.7 No.2B, 2019
• Hongyu Chen, Hongguang Zhu, Hongqiang Ma, Mingyue Zhang
• Citations: 3 (Details)

• Research on Reliability of Relaying Protection in Smart Substation, World Journal of Engineering and Technology, Vol.7 No.2, 2019
• Kai Wang, Wanqing Li
• Citations: 3 (Details)

• Availability, Performance and Reliability Evaluation for PV Distributed Generation, World Journal of Engineering and Technology, Vol.7 No.3, 2019
• Abdulrahman K. Al-Sefri, Abdullah M. Al-Shaalan
• Citations: 3 (Details)

• Analysis of Influencing Factors of Silt Solidified Soil in Flowing State, World Journal of Engineering and Technology, Vol.7 No.3, 2019
• Jihui Ding, Zhongmin Feng, Dongxu Sun, Kaikai You, Minghui Yan, Yalei Xun
• Citations: 3 (Details)

• Temperature Research of Permanent Magnet Brushless DC Motor for Electric Balanced Vehicle, World Journal of Engineering and Technology, Vol.7 No.4B, 2019
• Baoguo Wang, Jiangui Li, Dong Ai
• Citations: 3 (Details)

• Enhancing Wind Power Integration through Optimal Use of Flexibility in Multi-Carrier Energy Systems from the Danish Perspective, World Journal of Engineering and Technology, Vol.5 No.4B, 2017
• Yi Zong, Awadelrahman M. A. Ahmed, Jiawei Wang, Shi You, Chresten Træholt, Xianyong Xiao
• Citations: 3 (Details)

• The Assessment of Soil Quality on the Arable Land in Yellow River Delta Combined with Remote Sensing Technology, World Journal of Engineering and Technology, Vol.5 No.5B, 2017
• Linlin Guo, Hanjie Hao, Yanghua Liu, Haibo Ma, Jingbo An, Qian Sun, Zhao Yang
• Citations: 3 (Details)

• Determination of Bonding Failures in Transparent Materials with Non-Destructive Methods—Evaluation of Climatically Stressed Glued and Laminated Glass Compounds, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Christin Sirtl, Christin Sirtl, Matthias Kraus, Matthias Kraus, Christiane Hadlich, Christiane Hadlich, Andrea Osburg, Andrea Osburg
• Citations: 3 (Details)

• Engineering Intelligent Racing Concepts Using Design Research Methods, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Trevor Hyman, Wayne Li
• Citations: 3 (Details)

• Segregation Correlation of SSR Markers and Flower Traits in Aneuploid Tobacco, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Chao Liu, Jiangbo Dang, Lingli Wang, Zhi Chen, Ying Wang, Guanrong Li, Guolu Liang
• Citations: 3 (Details)

• Nitrogen Injection in Molten Aluminum in a Tank Degasser, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Luis A. Maldonado, Miguel A. Barron, Dulce Y. Miranda
• Citations: 3 (Details)

• Determination AHP Analysis of the Virtual Stage-Gate Process in the Global Scale Automotive Design, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Fuat Ali Paker, Cem Alppay, Begüm Sertyesilisik
• Citations: 3 (Details)

• Remote Operation SW for USV: Part I. Integrated Mission Planning System, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Jinyeong Heo, Jung Hoon Kim, Yongjin Kwon
• Citations: 3 (Details)

• Performance of Prototype Pneumatic Boxing Gloves under Two Different Conditions of Target Padding, World Journal of Engineering and Technology, Vol.6 No.3, 2018
• Paul Perkins, Alex Jamieson, Wayne Spratford, Allan Hahn
• Citations: 3 (Details)

• A Pipe Inspection Using a Circumferential SH-Mode Plate Wave Generated in a Pipe by an Electromagnetic Acoustic Transducer (EMAT), World Journal of Engineering and Technology, Vol.6 No.3, 2018
• Riichi Murayama, Hideo Nishino
• Citations: 3 (Details)

• Effectual Planning on Affordable Housing—The Case of Nanjing, World Journal of Engineering and Technology, Vol.6 No.2B, 2018
• Francis Deng Clement, Yunning Cheng, Zhang Hong
• Citations: 3 (Details)

• In-Line Inspection of Pipeline Defects Detection Using Ring-Type Laser, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Mathivanan Durai, Yang-Min Hsu, Ho Chang
• Citations: 3 (Details)

• Preliminary Exploration on the Application of Saussure Sign Concept in Bio-Inspired Design: A Case of Tiantoushui Doll-Design, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Yu-Chun Yao, Shiu-Hua Wu, Ai-Li Wang
• Citations: 3 (Details)

• Simplified Full Dynamic Analysis of a Railway Tunnel in Ethiopia, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Henok Fikre Gebregziabher, Tequamework Assefa
• Citations: 3 (Details)

• The Effect of Stem Diameter on the Brassica napus (Type: Canola) (Cultivar: HYHEAR 3) Fiber Quality, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Afroza Parvin, Mashiur Rahman, Douglas J. Cattani
• Citations: 3 (Details)

• Importance of Geotechnical Investigation for Design and Construction of Shafts over 1000 m Deep, World Journal of Engineering and Technology, Vol.9 No.2, 2021
• Dragana Savić, Milan Tumara, Milutin Petrović
• Citations: 3 (Details)

• Research on Risk Management of Cross-Sea Bridges Based on Analytic Hierarchy Process—Taking Hangzhou Bay Bridge as an Example, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Wenxing Zhang
• Citations: 3 (Details)

• Effect of 3D Printing Technology on 3C Product Manufacturing, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Guangqing Shang, Chunhua Sun
• Citations: 3 (Details)

• The Study of Tubing Vibration Mechanism in High Pressure Gas Well, World Journal of Engineering and Technology, Vol.9 No.1, 2021
• Jingbing Luo, Kui Zhang, Junlin Liu, Lingyu Mu, Fujun Wang
• Citations: 3 (Details)

• A Case Study on Soil Improvement with Rapid Impact Compaction (RIC), World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Emmanouil Spyropoulos, Bassim A. Nawaz, Saleh A. Wohaibi
• Citations: 3 (Details)

• Improvement of LEACH Algorithm Based on Inter-Cluster Ring Routing Strategy, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Quanquan Xiao, Xing Hou
• Citations: 3 (Details)

• Reliability of the MPPT Control on the Energy Parameters of a Photovoltaic Generator, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Batassou Guilzia Jeannot, Mandeng Jean Jacques, Mane Mane Jeannot
• Citations: 3 (Details)

• Paper the Resilience of ITS: Variable Message Signs Contribution to Road Network Resilience under Incident and High Congestion Conditions: A State of the Art Review, World Journal of Engineering and Technology, Vol.10 No.1, 2022
• Hashmatullah Amiri, Hongtao Li
• Citations: 3 (Details)

• Study on the Horizontal Movement State of Suction Anchor Piles for Offshore Wind Power during Horizontal Pulling, World Journal of Engineering and Technology, Vol.10 No.1, 2022
• Jianping Jiang, Jiaruo Gao
• Citations: 3 (Details)

• Optimal Sizing of Capacitor Bank for Increasing Substation Capacity of Mamou, World Journal of Engineering and Technology, Vol.11 No.2, 2023
• Jean Ouèrè Toupouvogui, Mohamed Ansoumane Camara, Ansoumane Sakouvogui, Mamby Keita
• Citations: 3 (Details)

• A Comparative Technique for Performance Evaluation of Hammer Mill and Disk Mill in Yam Flour Processing, World Journal of Engineering and Technology, Vol.10 No.3, 2022
• Joseph B. Bassey, Isaac F. Odesola, Joshua A. Olawuyi
• Citations: 3 (Details)

• Prospects of Robot Laser Cutting in the Era of Industry 4.0, World Journal of Engineering and Technology, Vol.10 No.3, 2022
• Emmanuel Afrane Gyasi, Arttu Antila, Prince Owusu-Ansah, Paul Kah, Antti Salminen
• Citations: 3 (Details)

• Maintenance in Marginal Oilfield Production Facilities: A Review, World Journal of Engineering and Technology, Vol.10 No.4, 2022
• Olawale D. Adenuga, Ogheneruona E. Diemuodeke, Ayoade O. Kuye
• Citations: 3 (Details)

• Analysis of the Material Properties of Vehicle Suspension Coil Spring, World Journal of Engineering and Technology, Vol.11 No.4, 2023
• Issifu Imoro, Jacob Kwaku Nkrumah, Baba Ziblim, Abdul-Hamid Mohammed
• Citations: 3 (Details)

• Green Drug Supply Chain Investigation by Time-Market Balance and Risk, World Journal of Engineering and Technology, Vol.11 No.3, 2023
• Mahmoudreza Entezami, Hossein Havaeji
• Citations: 3 (Details)

• Historical Review of Hydrogen Energy Storage Technology, World Journal of Engineering and Technology, Vol.11 No.3, 2023
• Wilson Fidelis Ekpotu, Joseph Akintola, Martins Chineme Obialor, Udom Philemon
• Citations: 3 (Details)

• Determining Critical Submergence in Tanks by Means of Reynolds & Weber Numbers, World Journal of Engineering and Technology, Vol.2 No.3, 2014
• Carlos Julián Gavilán Moreno
• Citations: 3 (Details)

• Dynamic Characteristics Analysis on Wind-Blown Sand Ground under Dynamic Compaction Vibration, World Journal of Engineering and Technology, Vol.2 No.3, 2014
• Jihui Ding, Jinguo Liang, Wei Wang
• Citations: 3 (Details)

• Theoretical Modeling and Experimental Analysis of Drying Process in Electromagnetic Field, World Journal of Engineering and Technology, Vol.2 No.1, 2014
• Arif Memmedov, Teymuraz Abbasov, Mustafa Şeker
• Citations: 3 (Details)

• Vibration Control for Two Air Compressor Units Used in Tandem, World Journal of Engineering and Technology, Vol.2 No.4, 2014
• Viorel-Mihai Nani, Ioan Cireş
• Citations: 3 (Details)

• Model Helicopter Control Using Body-Mounted Vibro-Tactile Transducers, World Journal of Engineering and Technology, Vol.2 No.4, 2014
• Rui Zhou, Merhran Mehrandezh, Raman Paranjape
• Citations: 3 (Details)

• Effect of Mechanical and Chemical Scarification on Germination of Dodder (Cuscuta campestris Yunck.) Seed, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• A. B. Mustapha, N. A. Gworgwor, B. B. Jakusko
• Citations: 3 (Details)

• Modelling of the Radiological Contamination of the RBMK-1500 Reactor Control and Protection System Channels’ Cooling Circuit, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Gintautas Poskas, Rimantas Zujus
• Citations: 3 (Details)

• Application of GFPuv Labeled Cronobacter sakazakii for Evaluation of Its Survival during Cornstarch Processing, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• Siti Nurjanah, Sarah Tiara Sulistyanti, Ratih Dewanti-Hariyadi
• Citations: 3 (Details)

• Trajectory Planning and Optimal Lateral Stability Control under Multiple Barriers for Intelligent Vehicle, World Journal of Engineering and Technology, Vol.3 No.3, 2015
• Zhonghua Zhang, Xuecai Yu, Zhijie Jin, Yejun Ying, Rongwei Hua, Xuwei Lin
• Citations: 3 (Details)

• Simple General Purpose Ion Beam Deceleration System Using a Single Electrode Lens, World Journal of Engineering and Technology, Vol.3 No.3, 2015
• J. Lopes, J. Rocha
• Citations: 3 (Details)

• The Paradigm of the Seismic Zonation Continuality, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• A. S. Aleshin
• Citations: 3 (Details)

• Simulation of an Accelerator Driven Subcritical Core with Mixed Uranium-Thorium Fuel, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Ali Pazirandeh, Laia Shirmohammadi
• Citations: 3 (Details)

• Modeling Policyholder Behavior through Insurance Resonant Marts for Pricing Options and Guarantees, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• S. Jayaprakash, Michael Ha
• Citations: 3 (Details)

• The Best Constant of Discrete Sobolev Inequality on a Weighted Truncated Tetrahedron, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Yoshikatsu Sasaki
• Citations: 3 (Details)

• Survey of Intracellular Protein Extraction Methods from Pichia pastoris, World Journal of Engineering and Technology, Vol.3 No.4C, 2015
• Yuli Wang, Yuansen Hu, Yang Lei, Yangyong Lv, Le Wang, Hongwei Wei
• Citations: 3 (Details)

• Hydrostratigraphy and Its Relation to Ground-Water Potentiality of an Area of the Ganges River Delta in Bangladesh, World Journal of Engineering and Technology, Vol.4 No.1, 2016
• M. Shahinuzzaman, Sajib Mostafa, Khan M. Nasir Uddin, M. Khairul Islam, Md. Alibuddin, M. Nozibul Haque
• Citations: 3 (Details)

• Slope Stability Assessment of Saptashrungi Gad Temple, Vani, Nashik, Maharashtra, India—A Numerical Approach, World Journal of Engineering and Technology, Vol.4 No.1, 2016
• Mohammad Khalid Ansari, Mashud Ahmad, Rajesh Singh, Trilok Nath Singh
• Citations: 3 (Details)

• Development of Product Design Projects Applying Specifications and Factors Matrix (SFM) as a Support Tool in Higher Education, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• José Luis Santolaya, Anna Maria Biedermann, Ana Serrano
• Citations: 3 (Details)

• Model of Maintenance Planning Based on Trend of Machines Failures with Two Priorities, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Erik Prada, Alena Pešková, Michael Valášek
• Citations: 3 (Details)

• Parameters Optimization for Piezoelectric Harvesting Energy from Pavement Based on Taguchi’s Orthogonal Experiment Design, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Chunhua Sun, Hongbing Wang, Guangqing Shang, Jianhong Du
• Citations: 3 (Details)

• Producing Renewable Biodiesel Fuel Using the Transesterification Process, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• T. W. Chung, Y. J. Chen
• Citations: 3 (Details)

• Robust Design of Mixing Static and Dynamic Multiple Quality Characteristics, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Ful-Chiang Wu
• Citations: 3 (Details)

• An Overview of Research on Optimization of Integrated Solar/Wind Power Generation Systems, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Zhonglei Shao, Kwok Lun Lo
• Citations: 3 (Details)

• Production of the Modified Liquid Glass in the Processing of Kaolinitic Clay, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• G. Sarsenbay, V. A. Kovzalenko, N. M.-K. Sadykov, A. O. Kaldybaeva
• Citations: 3 (Details)

• 3D Software Technology, Applicable in Elaboration of the Spatial Face Gear Drives for Incorporation into Robot Systems, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Emilia Abadjieva, Valentin Abadjiev, Detelina Ignatova
• Citations: 3 (Details)

• Analysis on Fracture Mechanics of Unstable Rock, World Journal of Engineering and Technology, Vol.4 No.3C, 2016
• Siqi Chen, Hongkai Chen, Ming Yang, Tao Chen, Kexuan Guo
• Citations: 3 (Details)

• Evaluation and Improvement of Roundabouts in Changchun, World Journal of Engineering and Technology, Vol.4 No.3C, 2016
• Mo Zhou, Lili Yang, Hoong Chor Chin
• Citations: 3 (Details)

• Finite Element Analysis on a Square Canister Piezoelectric Energy Harvester in Asphalt Pavement, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Hongbing Wang, Chunhua Sun
• Citations: 3 (Details)

• Investigate of Effective Factors on Extraction of Silver from Tailings of Lead Flotation Plant Using Thiourea Leaching, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Bandehzadeh Masoud, Aryanimehr Amir, Rezai Bahram
• Citations: 3 (Details)

• Biomechanical Comparison of Prototype of a Novel Intramedullary Injectable Bioresorbable Polymer-Bioresorbable Balloon Osteosynthesis and a Volar Locking Plate for Treatment of Distal Radius Fractures, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Adam Zysk, Gladius Lewis, Daniel Taxier, John Rose
• Citations: 3 (Details)

• Research on Applying Nano Cutting Oils in Spur Gear Hobbing Process, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Tuan Ngo, Vi Hoang, Sinh Hoang
• Citations: 3 (Details)

• Application of High-Voltage Power Supply on Electrostatic Precipitator, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Yan-Jie Li, Yu-Xiang Chen
• Citations: 3 (Details)

• Monitoring Groundwater and Its Suitability for Drinking and Irrigation Purposes in the Sharif Abad Basin, Central Iran, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Farzad Mohammadi, Majid Ehteshami, Seyed Ahmad Mirbagheri, Salman Tavassoli
• Citations: 3 (Details)

• Sustainable Construction—High Performance Concrete Containing Limestone Dust as Filler, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Tahir Kibriya, Leena Tahir
• Citations: 3 (Details)

• Effect of Media Material on Biogas Production, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• O. T. Oginni, O. L. Rominiyi, B. A. Adaramola, S. A. Babalola
• Citations: 3 (Details)

• The Research Framework Model of Rapid Assessment and Emergency Plan Selection for Urban Flood Disaster, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Junai Yan, Yuanyuan Fan, Shuwei Jing
• Citations: 3 (Details)

• Numerical Simulation and Optimization of Perforated Tube Trolley in Circular Cooler, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Bin Wu, Kunrong Huang, Defan Qing, Maokui Zhu
• Citations: 3 (Details)

• Verification of VVER-1200 NPP Simulator in Normal Operation and Reactor Coolant Pump Coast-Down Transient, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Le Dai Dien, Do Ngoc Diep
• Citations: 2 (Details)

• Analysis and Prediction of Foundation Settlement of High-Rise Buildings under Complex Geological Conditions, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Jihui Ding, Bingjun Li, Erxia Du, Weiyu Wang, Tuo Zhao
• Citations: 2 (Details)

• Properties of Rapid Hardening Controlled Low Strength Material Made of Recycled Fine Aggregate from Urban Red Brick Construction Waste, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Jin Ran, Jinxi Zhang
• Citations: 2 (Details)

• Use of Masonry Construction & Demolition Waste in Concrete, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Tahir Kibriya, Leena Tahir
• Citations: 2 (Details)

• Response to Applied Voltage to Polyurethane Soft Actuators with Loaded Weights, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Masato Ohmukai, Jun Kyokane
• Citations: 2 (Details)

• A Comparative Study on Test Case Generation of Concurrent Programs, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Bidush Kumar Sahoo, Mitrabinda Ray
• Citations: 2 (Details)

• Application of Inflow Model for Weir Irrigation System without Upstream Dam, World Journal of Engineering and Technology, Vol.4 No.3B, 2016
• Sombat Chuenchooklin, Udomporn Pangnakorn
• Citations: 2 (Details)

• Development of an Ultrasonic Motor That Uses an Inchworm Shaped Deformation of a Metallic Plate, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Akihiro Naganawa, Kazumi Komatsu, Hisashi Ito
• Citations: 2 (Details)

• Design and Performance Evaluation of Piezo-Driven Synthetic Jet Devices, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• M. Chiatto, L. de Luca
• Citations: 2 (Details)

• On the Impact of the Frequency of Saved Thermal Time-Steps in a Weakly-Coupled FE Weld Simulation Model, World Journal of Engineering and Technology, Vol.4 No.4, 2016
• Richard P. Turner, R. Mark Ward
• Citations: 2 (Details)

• Characteristics of Mechanical and Electrical Power Transmission for Small-Scaled Wind Turbine, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Kyu-Jin Lee, Hyun-Dai Yang, Sung-Hoon Park, Sung-Do Song, Byung-Sun Kim, Joong-Ho Shin
• Citations: 2 (Details)

• Prediction of External Exposure during Dismantling of Steam Generator, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Martin Hornáček, Vladimír Nečas
• Citations: 2 (Details)

• Using Neural Networks for Simulating and Predicting Core-End Temperatures in Electrical Generators: Power Uprate Application, World Journal of Engineering and Technology, Vol.3 No.1, 2015
• Carlos J. Gavilán Moreno
• Citations: 2 (Details)

• Proposal to Disseminate the Knowledge of Tsunamis in the Caribbean Coast of Costa Rica, Central America, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Mario Fernández Arce, Daniel Solís, Juan Luis Porras, Gino González
• Citations: 2 (Details)

• On the Buckling of Euler Graphene Beams Subject to Axial Compressive Load, World Journal of Engineering and Technology, Vol.2 No.2, 2014
• Mohamed B. M. Elgindi, Dongming Wei, Yeran Soukiassian, Yu Liu
• Citations: 2 (Details)

• Experimental Evaluation of the Attenuation Effect of a Passive Damper on a Road Vehicle Bumper, World Journal of Engineering and Technology, Vol.2 No.3, 2014
• A. Agyei-Agyemang, G. Y. Obeng, P. Y. Andoh
• Citations: 2 (Details)

• Experimentation of a Forced Convection Solar Dryer for Drying Sweet Potatoes at the Higher Institute of Technology of Mamou-Guinea, World Journal of Engineering and Technology, Vol.11 No.3, 2023
• Ansoumane Sakouvogui, Thierno Amadou Barry, Adama Moussa Sakho, Mamby Keita
• Citations: 2 (Details)

• Research on the Early Warning System of Cold Chain Cargo Based on OCR Technology, World Journal of Engineering and Technology, Vol.10 No.3, 2022
• Jiaxuan Meng
• Citations: 2 (Details)

• Comparative Study of the Thermal and Mechanical Properties of Foamed Concrete with Local Materials, World Journal of Engineering and Technology, Vol.10 No.3, 2022
• Adelaïde Lareba Ouédraogo, Sayouba Kabré, Etienne Malbila, Abdoulaye Compaoré, Ramatou Saré, Paul Ilboudo, Sié Kam, Bruno Korgo, Dieudonné Joseph Bathiebo, Florent P. Kieno, Philippe Blanchard
• Citations: 2 (Details)

• Solutions for the Rehabilitation of Historical Building Facades with Local Materials, World Journal of Engineering and Technology, Vol.10 No.3, 2022
• Ion Albu, Doina-Cezara Albu, Viorica Ursu
• Citations: 2 (Details)

• Rock Stress Measurement Methods in Rock Mechanics—A Brief Overview, World Journal of Engineering and Technology, Vol.11 No.2, 2023
• Mohammed Sazid, Khaled Hussein, Khalid Abudurman
• Citations: 2 (Details)

• Research Hotspots and Prospects of Third-Tier Construction Industrial Heritage, World Journal of Engineering and Technology, Vol.10 No.3, 2022
• Yanyi Chen, Mingming Xiang
• Citations: 2 (Details)

• Elaboration and Characterization of a Plaster Reinforced with Fibers from the Stem of Cola lepidota for Industrial Applications, World Journal of Engineering and Technology, Vol.10 No.4, 2022
• Zogo Tsala Simon Armand, Noah Pierre Marcel Anicet, Ayissi Zacharie Merlin, Betene Ebanda Fabien, Nkenne Youmba Judide, Kenmogne Fabien, Atangana Ateba
• Citations: 2 (Details)

• The Disk-Magnet Electromagnetic Induction Applied to Thermoelectric Energy Conversions, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Hiroshi Uechi, Schun T. Uechi
• Citations: 2 (Details)

• Net Present Value Method: A Method Recommended by ISO 15686-5 for Economic Evaluation of Building Life Cycle Costs, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Hao Xie, Qiao Cui, Yang Li
• Citations: 2 (Details)

• A Generalized Non-Linear Flow Law Based on Modified Zerilli-Armstrong Model and Its Implementation into Abaqus/Explicit FEM Code, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Pierre Tize Mha, Amèvi Tongne, Olivier Pantalé
• Citations: 2 (Details)

• Effect of Bio-Disc on Distillate Yield and Crude Oil Properties, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Anthony Kerunwa, Princewill O. Ariche
• Citations: 2 (Details)

• Evaluation of Physicochemical Properties and Antioxidant Activity of Wheat-Red Kidney Bean Biscuits, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Mukta Roy, Sheikh Mohammad Nasirul Haque, Rana Das, Manobendro Sarker, Md. Azmain Al Faik, Shagor Sarkar
• Citations: 2 (Details)

• The Effect of Using Cokriging against Ordinary Kriging When Estimating Phosphate Deposits at Elsebaiya Area, Egypt, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• H. A. Farag, M. A. Gouda, M. A. Yassin
• Citations: 2 (Details)

• Research on Collision Response of Titanium Alloy Cylindrical Pressure Shell, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Lin Wang, Xiang Jiang, Lei Huang
• Citations: 2 (Details)

• Evaluating Contractors’ Safety Record and Its Influence on Performance of Road Infrastructural Projects, World Journal of Engineering and Technology, Vol.9 No.2, 2021
• James Mushori, Charles Mallans Rambo, Charles Misiko Wafula, Johnson Matu
• Citations: 2 (Details)

• Theory and Practice of Heat Transfer in Electric Arc and Flare Furnaces and Power Plants, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Anatoliy Nikolaevich Makarov
• Citations: 2 (Details)

• Gate Optimization Analysis of Injection Molding for Mobile Phone Panel Based on Moldflow and Drop Simulation, World Journal of Engineering and Technology, Vol.9 No.1, 2021
• Hongbing Wang, Chunhua Sun
• Citations: 2 (Details)

• Mathematical Modeling of Shear Stress and Direct Shear Test for Compressible Soil: Case of Soil Bordering the Wouri River, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Michael Soup Teoua Ouagni, François Ngapgue, Fabien Kenmogne, Alain Soup Tewa Kammogne, Simon Ngoh Koumi
• Citations: 2 (Details)

• Analysing the Microstructures and Pin-on-Disc Wear Properties of 1010 Steel-Based and B₄C-Added Materials Produced through Powder Metallurgy, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Mehtap Demirel, Vahdettin Koç
• Citations: 2 (Details)

• Risk Analysis of Cavitation in Hydraulic Structures, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Gabriel Echávez
• Citations: 2 (Details)

• Additively Manufactured Ti-6Al4V before and after Hot Isostatic Pressing, World Journal of Engineering and Technology, Vol.9 No.2, 2021
• Brad Baker, Keegan Wisdom
• Citations: 2 (Details)

• Interaction between a Liquid Surface and an Impinging Gas Jet, World Journal of Engineering and Technology, Vol.9 No.4, 2021
• Miguel A. Barron, Dulce Y. Medina, Joan Reyes
• Citations: 2 (Details)

• Response Surface Methodology and Artificial Neural Network Methods Comparative Assessment for Fuel Rich and Fuel Lean Catalytic Combustion, World Journal of Engineering and Technology, Vol.9 No.4, 2021
• Tahani S. Gendy, Amal S. Zakhary, Salwa A. Ghoneim
• Citations: 2 (Details)

• Green Affordable Social Housing: A Survey-Based Passive Cooling Design, with Focus on Jakande Housing Estate in Lagos, Nigeria, World Journal of Engineering and Technology, Vol.9 No.4, 2021
• Justus Anih Nzube, Aimin Lyu
• Citations: 2 (Details)

• Lessons Learnt from Chinese Housing Development the Case of Affordable Housing and Its Funding, World Journal of Engineering and Technology, Vol.6 No.2B, 2018
• Francis Deng Clement, Yunning Cheng, Zhang Hong
• Citations: 2 (Details)

• Development of Risk Index of Uninterrupted Traffic Flow According to the Occurrence of Fog, World Journal of Engineering and Technology, Vol.6 No.3, 2018
• Soullam Kim, Sung Han Lim
• Citations: 2 (Details)

• Automobile Roof Panel Forming: Prediction and Compensation of Springback and Application of Numerical Simulation Based on Dynaform, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Amsalu K. Addis
• Citations: 2 (Details)

• Analysis of Striation Formation and Suppression Strategy on Upper Edge of Cutting Surface in Laser Cutting, World Journal of Engineering and Technology, Vol.6 No.1, 2018
• Chao Li, Dengfei You
• Citations: 2 (Details)

• Influence of Plastic Deformation on Occurrence of Discontinuous Reaction in Ni-In Alloy, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Shaban Abdou, Hassan Abd El-Hafez
• Citations: 2 (Details)

• Study on Fundamental Technology of Multi Directional Vibration Piezoelectric Power Generation, World Journal of Engineering and Technology, Vol.6 No.1, 2018
• Arslan Habib, Adesh Ananta
• Citations: 2 (Details)

• The Influence of Water-Jet Modification of Soil Conditions on Reduction of Vibrations during Sheet Pile Driving in the Subsoil, World Journal of Engineering and Technology, Vol.6 No.1, 2018
• Artur Jaroń, Małgorzata Jastrzębska, Marian Łupieżowiec
• Citations: 2 (Details)

• Model of Plant Productivity and a Computer System for Optimization of Agro-Technology Using the Method of Exergic Analysis, World Journal of Engineering and Technology, Vol.5 No.5B, 2017
• V. A. Mudrik
• Citations: 2 (Details)

• Springback of I-Section Beam after Pure Bending with von Mises Criteria, World Journal of Engineering and Technology, Vol.6 No.1, 2018
• Reham Saleh, Gamal Ali, Abla El-Megharbel
• Citations: 2 (Details)

• Stress Analysis of New Type Pre-Stressed Anchor Bearing Plate Combining Stamping with Welding Forming and Its Anchorage Zone, World Journal of Engineering and Technology, Vol.5 No.4B, 2017
• Daosen Chen, Nianchun Deng, Zanzhi Wang, Haining Zuo
• Citations: 2 (Details)

• Effect of Pneumatic Boxing Gloves on Impact Kinematics and Their Relationship to Impact Forces, World Journal of Engineering and Technology, Vol.7 No.3, 2019
• Paul Perkins, Alex Jamieson, Wayne Spratford, Allan Hahn
• Citations: 2 (Details)

• Development of Drone Cargo Bay with Real-Time Temperature Control, World Journal of Engineering and Technology, Vol.7 No.4, 2019
• Sedam Lee, Yongjin Kwon
• Citations: 2 (Details)

• Application of Reconstruction and Optimization Algorithms in Optical Tomography, World Journal of Engineering and Technology, Vol.8 No.2, 2020
• Umair Sajjad Hashmi, Raheel Muzzammel, Rabia Arshad, Saba Mehmood
• Citations: 2 (Details)

• Design of Reduced Graphene Oxide Based Piezo-Resistive Type Acoustic Sensor on Flexible Kapton for Underwater Applications, World Journal of Engineering and Technology, Vol.7 No.2, 2019
• B. Smitha Pai, M. A. Goutham, Veera Pandin
• Citations: 2 (Details)

• Study on the Elman Neural Network Operation Control Strategy of the Central Air Conditioning Chilled Water System*, World Journal of Engineering and Technology, Vol.7 No.2B, 2019
• Jianwei Li, Qingchang Ren, Hai Long, Zengxi Feng
• Citations: 2 (Details)

• Effects of Moisture Content and Plasticity Index on Duncan-Chang Model Parameters of Hydraulic Fill Soft Soil, World Journal of Engineering and Technology, Vol.7 No.3, 2019
• Erzhong Chen, Meng Yan, Jihui Ding, Cen Gao, Yu Gan
• Citations: 2 (Details)

• Exergy Analysis of a Double-Effect Solar Absorption Refrigeration System in Ngaoundere, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Maurice Tenkeng, Paiguy Armand Ngouateu Wouagfack, Réné Tchinda
• Citations: 2 (Details)

• Reliable Colour Detection for Matching Repaint Application, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Ibrahim Al-Bahadly, William Wilkinson
• Citations: 2 (Details)

• Pneumatic Boxing Glove Reduces Upward Drift in Peak Force and Loading Rate over a Long Series of Impacts, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Paul Perkins, Alex Jamieson, Wayne Spratford, Allan Hahn
• Citations: 2 (Details)

• Research on Subcontractor Risk of EPC Hydropower Project in Vietnam, World Journal of Engineering and Technology, Vol.7 No.1, 2019
• Dinh Bui, Sy Hung Mai, Huu Hai Vu
• Citations: 2 (Details)

• New Formulas for the Mayer and Ree-Hoover Weights of Infinite Families of Graphs, World Journal of Engineering and Technology, Vol.7 No.2, 2019
• Amel Kaouche
• Citations: 1 (Details)

• Modeling Off-Shore Wind Turbine Construction Project Subject to Impact of Wind Uncertainty, World Journal of Engineering and Technology, Vol.7 No.2B, 2019
• Sy-Jye Guo
• Citations: 1 (Details)

• Research on Fuzzy Multiple Attribute Route Evaluation Decision Method, World Journal of Engineering and Technology, Vol.7 No.2B, 2019
• Geng Yu, Qing Liu
• Citations: 1 (Details)

• Stress Analysis of Buried Pipeline Installed by Horizontal Directional Drilling Using ANSYS Finite Element Software, World Journal of Engineering and Technology, Vol.7 No.3, 2019
• Francis Temilola Olumoko, Chinwuba Victor Ossia
• Citations: 1 (Details)

• Analysis of Steel Connections to Resist Progressive Collapse, World Journal of Engineering and Technology, Vol.7 No.2B, 2019
• Yanglin Gong, Chen Zhang, Jian Deng
• Citations: 1 (Details)

• Research on the Supervision and Regulation Mode of Production Safety in China, Germany and Canada, World Journal of Engineering and Technology, Vol.7 No.2B, 2019
• Yixu Gong
• Citations: 1 (Details)

• Practical Experiences with the First Relative Gravimeter of Type Scintrex CG-6 Autograv in Dubai, The United Arab of Emirates, World Journal of Engineering and Technology, Vol.8 No.2, 2020
• Ossama S. Aly, Basem Elsaka, Eman A. Al Khatibi
• Citations: 1 (Details)

• A Degassing Inlet Structure for Aquaculture Ponds, World Journal of Engineering and Technology, Vol.8 No.2, 2020
• Joshua M. A. Caasi, Eric Krebs, Nathan Huysman, Jill M. Voorhees, Michael E. Barnes
• Citations: 1 (Details)

• New Interface Complexity Metric on XML Schema, World Journal of Engineering and Technology, Vol.8 No.2, 2020
• Kehinde Sotonwa, Titilayo Olusi, Oyebola Adeife
• Citations: 1 (Details)

• Optimization Analysis of Correction Tape Box Compounding Cavity Runner Balance Based on Moldflow, World Journal of Engineering and Technology, Vol.8 No.1, 2020
• Hongbing Wang, Chunhua Sun
• Citations: 1 (Details)

• Study on the Conservation Mode and Renewal Strategy of Ancient City of Anyang, World Journal of Engineering and Technology, Vol.8 No.1, 2020
• Zhenzhen Wang, Yujie Lou, Benxiao Zhang
• Citations: 1 (Details)

• Experimental Investigation on the Shape and Depth of Local Scour Hole Downstream of the Release Structure, World Journal of Engineering and Technology, Vol.8 No.1, 2020
• Vouchleang Hong, Genguang Zhang, Xinqiang Wang, Anbin Li
• Citations: 1 (Details)

• Composite Consolidation Coefficient Analysis of Soft Soil with Drainage Water, World Journal of Engineering and Technology, Vol.7 No.4, 2019
• Jihui Ding, Kaikai You, Zhongmin Feng, Dongxu Sun
• Citations: 1 (Details)

• Simulation Analysis of Characteristics for Independent Metering Control System Based on Downstream Compensation, World Journal of Engineering and Technology, Vol.7 No.3, 2019
• Guotai Zhang, Jie Xu, Jing Yang, Kailei Liu
• Citations: 1 (Details)

• Spatio-Temporal Polar-Inclined Space Mission Architecture for a Refined Retrieve of the Earth’s Gravity Field, World Journal of Engineering and Technology, Vol.7 No.4, 2019
• Basem Elsaka
• Citations: 1 (Details)

• The Productivity Model of Horizontal Well Considering Acidification Effect in Anisotropic Reservoirs, World Journal of Engineering and Technology, Vol.8 No.1, 2020
• Enhui Sun, Wei Yang, Qin Peng, Peng Meng, Songru Mu
• Citations: 1 (Details)

• Performance Analysis of Composite Magnetic Circuit Permanent Magnet Wind Generator, World Journal of Engineering and Technology, Vol.7 No.4B, 2019
• Gensheng Li, Zongxiao Yang, Ximei Li
• Citations: 1 (Details)

• Collision Analysis of the Unconventional Double Hull of a Ship, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Adrian Presura
• Citations: 1 (Details)

• Application of a Fuzzy Analytical Hierarchy Process for Predicting the Grindability of Granite, World Journal of Engineering and Technology, Vol.5 No.4B, 2017
• Zhengmei Zhang, Jing Wang, Huiying Cao, Qiuxia Lu, Mingwei Ding
• Citations: 1 (Details)

• A Novel Blood Coagulation Measuring Method Based on the Viscoelasticity of Non-Newtonian Fluid, World Journal of Engineering and Technology, Vol.5 No.4B, 2017
• Jiahua Kou, Yuhe Li, Pengyan Yang, Jintong Zhang
• Citations: 1 (Details)

• An Analysis of Double Laplace Equations on a Concave Domain, World Journal of Engineering and Technology, Vol.6 No.2, 2018
• Hai-Ping Hu
• Citations: 1 (Details)

• Remote Operation SW for USV: Part II. Simulation Development, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Jinyeong Heo, Kun Chul Hwang, Yongjin Kwon
• Citations: 1 (Details)

• Analysis of Factors Affecting Solidification Strength of Sludge in a Landfill Area of Shenzhen, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Jihui Ding, Tianyv Zhang, Jie Huang, Wei Chen
• Citations: 1 (Details)

• Numerical Simulation of a Batch-Type Reheating Furnace, World Journal of Engineering and Technology, Vol.6 No.4, 2018
• Francisco J. Nava, Miguel A. Barron, Dulce Y. Medina
• Citations: 1 (Details)

• Homocysteine, Vitamin B12 and Folic Acid in Children with Acute Glomerulonephritis, World Journal of Engineering and Technology, Vol.6 No.3, 2018
• Duangkamol Viroonudomphol, Saowanee Kanjanachumpol, Sarinya Sirisate
• Citations: 1 (Details)

• Error Analysis of Radial Motion Measurement of Ultra-Precision Spindle, World Journal of Engineering and Technology, Vol.6 No.3, 2018
• Risheng Zhang, Jialin Yang, Erwei Shang, Yanqiu Chen, Yu Liu
• Citations: 1 (Details)

• Study of Flow Field inside a Rectangular Air Intake with Pointed Cowl for Different Back Pressures at Mach 2.2, World Journal of Engineering and Technology, Vol.6 No.3, 2018
• Shravan Koundinya Vutukuru, Sudip Das, Aleksandrs Urbahs
• Citations: 1 (Details)

• Advanced Deterioration Diagnosis Model for Building External Wall Tiles, World Journal of Engineering and Technology, Vol.6 No.2B, 2018
• Sy-Jye Guo
• Citations: 1 (Details)

• Urban Development and Water Management in the Yangtze River Delta, World Journal of Engineering and Technology, Vol.6 No.2B, 2018
• Yan Wang, Wei Wu
• Citations: 1 (Details)

• Performance Simulation of a Modified Geothermal Grain Dryer Based at Menengai Well 3 in Kenya, World Journal of Engineering and Technology, Vol.10 No.1, 2022
• Levi Kulundu, Hiram Ndiritu, Gareth Kituu, James Kimotho
• Citations: 1 (Details)

• A Part as an Object of Assembly, World Journal of Engineering and Technology, Vol.9 No.4, 2021
• Štefan Václav, Peter Pokorný, Adriana Kamenszká
• Citations: 1 (Details)

• Assessment of Industrial Risks Related to Steam Production in a Thermal Production Service: Case of the Ouaga North of Burkina Faso Thermal Production Service, World Journal of Engineering and Technology, Vol.9 No.4, 2021
• Madjoyogo Hervé Sirima, Betaboale Naon, Frédéric Bationo
• Citations: 1 (Details)

• Slope Instability at Nablus-Al Bathan Road, Palestinian Territories (Causes, Analysis and Remedy Measurements), World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Isam Jardaneh, Sami Hijjawi, George Odeh
• Citations: 1 (Details)

• Research on the Recovery of Irregular Flights under Uncertain Conditions, World Journal of Engineering and Technology, Vol.9 No.4, 2021
• Xiangfei Meng, Xiaoyu Lin, Hualei Zhao, Jing Yang
• Citations: 1 (Details)

• Improving the Light Extraction Efficiency of GaN-Based Light-Emitting Diode, World Journal of Engineering and Technology, Vol.9 No.2, 2021
• Lianjun Zhang, Zhongqi Fan, Gang Liu
• Citations: 1 (Details)

• Generation of Ultrasound Based on the Frequency Response Characteristics of the “Koss Pro Headphone” with R. David Case Sound Wave Files’—A Case Study, World Journal of Engineering and Technology, Vol.9 No.2, 2021
• R. David Case, D. Chuckravanen
• Citations: 1 (Details)

• Comparative Analysis of Hybrid Controllers of Done Systems (UPFC) and Interphase Power Regulators Type RPI 30p15 on Contingency Management in Electrical Networks, World Journal of Engineering and Technology, Vol.9 No.3, 2021
• Koko Koko Joseph, Nneme Nneme Léandre, Ndjakomo Essiane Salomé, Batassou Guilzia Jeannot
• Citations: 1 (Details)

• Research on Fast Semi-Quantitative Risk Assessment Method for High Temperature and High Pressure Gas Wells, World Journal of Engineering and Technology, Vol.9 No.1, 2021
• Mifeng Zhao, Hailong Geng, Jingcheng Zhang, Junfeng Xie, Kelin Wang
• Citations: 1 (Details)

• Applications of AuNRs@SiO₂ Matrix Nanocomposites, World Journal of Engineering and Technology, Vol.9 No.1, 2021
• Huiqin Li, Shaotian Yan, Lihua Wu, Shumei Dou
• Citations: 1 (Details)

• Arm-Root Curve Fitting Based on Body Surface Feature Points for Young Male, World Journal of Engineering and Technology, Vol.9 No.2, 2021
• Kaili Liu, Hongshu Jin
• Citations: 1 (Details)

• Bubbling to Jetting Transition during Argon Injection in Molten Steel, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Miguel A. Barron, Joan Reyes, Dulce Y. Medina
• Citations: 1 (Details)

• Image J Analysis of Six Different Annealed Temperatures of 0.17% C of HSLA Steels, World Journal of Engineering and Technology, Vol.8 No.4, 2020
• Ngozi Grace Emordi, Iweriolor Sunday, Onyekpe Basil Obimma
• Citations: 1 (Details)

• Research on Deformation and Force of Bridge Pile Foundation on High and Steep Slope in Mountainous Area, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Mingyue Zhang, Hao Luo
• Citations: 1 (Details)

• Colour Reflectance Investigation of Decolourized Sulfur Dyed Cotton Knitted Fabric via Ozone Plasma Treatment, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Yaohui Liu, Yanming Wang, Hiu-Yan Cheung, Chi-Wai Kan, Hong Chua
• Citations: 1 (Details)

• Simulation of Stripper Flooding Due to the Increase of Feed Flowrate, World Journal of Engineering and Technology, Vol.8 No.3, 2020
• Mubarak J. Al Mehairbi, Salem A. Al Mahri, Zin Eddine Dadach
• Citations: 1 (Details)

• An Ensemble Learning Recommender System for Interactive Platforms, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Bernabe Batchakui, Basiliyos Tilahun Betru, Dieudonné Alain Biyong, Lauris Djilo Tchuenkam
• Citations: 1 (Details)

• Mathematical Modelling of Operating Temperature Variations of Shell-and-Tube Heat Exchanger (10-E-01), World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Romokere Isotuk Uzono, Ojong Elias Ojong
• Citations: 1 (Details)

• The Role of Open Space in Human Settlement Development in the Tamale Metropolis of Northern Ghana, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Mahamud Shaibu, Debrah Kwame Donkor
• Citations: 1 (Details)

• Spatial Configuration of Traditional Dwellings in Riyadh Al-Khabra Traditional Town, Saudi Arabia, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Mamdouh Mohammed Al-Harbi, Nashwan Al-Ansi, Mohammed Alrubayan
• Citations: 1 (Details)

• Excel as an Educational Platform for Design Analyses of Fluid-Thermal Systems, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Mohamed M. El-Awad, Mohammed S. Al-Saidi
• Citations: 1 (Details)

• Monte Carlo Modeling and Verification of 6 MV Linear Accelerator, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Shixiong Lu, Haijun Deng
• Citations: 1 (Details)

• Failure Analysis of Austenitic Stainless Steel Implant Screws and Prospection of Chemical Composition Using Artificial Intelligence, World Journal of Engineering and Technology, Vol.10 No.1, 2022
• Alfonso Monzamodeth Román-Sedano, Bernardo Campillo, Fermín Castillo, Osvaldo Flores
• Citations: 1 (Details)

• Towards an Eco-Efficient Development Strategy that Minimises the Risks Associated with the Location of Gas Stations in Human Settlements: A Fuzzy PROMETHEE Method, World Journal of Engineering and Technology, Vol.10 No.1, 2022
• Samuel Batambock, Innocent Ndoh Mbue, Dieudonne Bitondo
• Citations: 1 (Details)

• Improvement of the Algorithm for Computing Adjusted Structure Number for Determination of Backlog Maintenance, World Journal of Engineering and Technology, Vol.10 No.2, 2022
• Ndume Vitalis, Mlavi Ephather
• Citations: 1 (Details)

• Rare-Earth Doped GdVO₄ by Sol-Gel Method: Structural and Luminescence Properties, World Journal of Engineering and Technology, Vol.10 No.4, 2022
• D. Y. Medina-Velázquez, A. D. J. Morales-Ramírez, A. A. Morales-Hernández, B. Gonzalez, L. Ramírez-García, E. Garfías-García, J. Oliva, C. R. Garcia, J. Reyes-Miranda, M. A. Barron, E. Osorio-de-la-Rosa
• Citations: 1 (Details)

• Fatigue Life Analysis of Coiled Tubing in Deep Well Jet Plugging Removal, World Journal of Engineering and Technology, Vol.11 No.1, 2023
• Ju Liu, Qiao Wang, Wei Zhang, Zhihong Zhou, Wenzhong Hu, Yan Wang
• Citations: 1 (Details)

• Pavement Performance Research Progress and Evaluation of Asphalt Mixture Incorporating Iron Ore Tailings, World Journal of Engineering and Technology, Vol.10 No.3, 2022
• Yuefeng Zhu, Jiawei Zhang, Jie Yang, Gang Wang, Xiangzhen Zhao
• Citations: 1 (Details)

• Uniform Flow of Molten Metals in Rectangular Open Channels, World Journal of Engineering and Technology, Vol.10 No.3, 2022
• Miguel A. Barron, Joan Reyes, Dulce Y. Medina
• Citations: 1 (Details)

• Design of a High-Gain 2 × 1 Array Antenna for S-Band Applications, World Journal of Engineering and Technology, Vol.11 No.2, 2023
• Md. Imran Hossain, Md. Ariful Islam, Md. Tofail Ahmed, Md. Humaun Kabir
• Citations: 1 (Details)

• Determination of the Properties of Some Selected Timber Species for Structural Application, World Journal of Engineering and Technology, Vol.11 No.2, 2023
• Asimiyu Amobi Oyediran, Catherine Mayowa Ikumapayi, Babatola Olufemi
• Citations: 1 (Details)

• The Shaping of Spatial Morphology by Water Systems in Traditional Villages in Southern Hunan, China and Its Mechanism of Action, World Journal of Engineering and Technology, Vol.11 No.2, 2023
• Yang Xu, Wenlong Zhou, Zihan Zhang
• Citations: 1 (Details)

• Python SystemVerilog (Python SV), World Journal of Engineering and Technology, Vol.11 No.3, 2023
• Santhosh Nagaraj Nag
• Citations: 1 (Details)

• Solanum lycopersicum: Novelties for Climate Factors and Its Agronomic Management for High Yields, World Journal of Engineering and Technology, Vol.10 No.3, 2022
• Víctor García-Gaytán, Soledad García-Morales, Ana V. Coria-Téllez, Fanny Hernández-Mendoza, Janet María León-Morales
• Citations: 1 (Details)

• A Study on the Shear Strength Characteristic of Unsaturated Red Clay, World Journal of Engineering and Technology, Vol.10 No.4, 2022
• Fei Huang, Lichun Zhuo, Keneng Zhang
• Citations: 1 (Details)

• New Autonomous Vehicle Technologies Effect on Automotive Concept Design Stages, World Journal of Engineering and Technology, Vol.10 No.4, 2022
• Fuat Ali Paker
• Citations: 1 (Details)

• NASA’s Mission ACTIVATE: Objectives, Strategies, and Limitations, World Journal of Engineering and Technology, Vol.10 No.4, 2022
• Shreyas Banaji
• Citations: 1 (Details)

• Evolution of the “OS Wheel” Model of Operations Strategy in Continuous Manufacturing Industry, World Journal of Engineering and Technology, Vol.11 No.3, 2023
• Rajagopalan Jayarama
• Citations: 1 (Details)

• Assessment of Modeling Collimator Designs for Gamma-Ray Transmission of Uranium Oxide Spectrometry Using HPGe Detectors, World Journal of Engineering and Technology, Vol.11 No.4, 2023
• Rasha Ali El-Tayebany, Hekmat Elbegawy
• Citations: 1 (Details)

• A Generic Intelligent Agent Design Approach Based on Artificial Neural Networks, World Journal of Engineering and Technology, Vol.11 No.4, 2023
• Thierry Noulamo, Alain Djimeli-Tsajio, Roger Kameugne, Jean-Pierre Lienou
• Citations: 1 (Details)

• PID and Fuzzy Logic Control of Ball and Beam System Using Particle Swarm Optimization, World Journal of Engineering and Technology, Vol.11 No.4, 2023
• Muhammad Alızada, Sıtkı Ozturk
• Citations: 1 (Details)

• Acknowledging the Challenges of Constructing in Regions with Low Temperature, World Journal of Engineering and Technology, Vol.11 No.4, 2023
• Md Ratan Bhuiyan, Md Rabiul Azam, Badal Hossain, Md Taruk Aziz, Md Abdullah Al Galib
• Citations: 1 (Details)

• Assessment of Deviation in Quality of Steel Reinforcing Bars Used in Some Building Sites in Cameroon, World Journal of Engineering and Technology, Vol.11 No.4, 2023
• Patrick Che Bame, Bell Emmanuel Yamb, Billong Ndigui
• Citations: 1 (Details)

• The Application and Prospects of Digital Visualization in Urban Public Building Space Design, World Journal of Engineering and Technology, Vol.11 No.4, 2023
• Pan Liang, Sharul Azim Sharudin
• Citations: 1 (Details)

• Significance of Nanoparticles Aggregation with Cattaneo-Christov Heat Flux on the Water and Ethylene Glycol Mixture Based MWCNTs-Nanofluid Flow over a Stretching Cylinder, World Journal of Engineering and Technology, Vol.11 No.4, 2023
• Muhammad Ramzan, Nazia Shahmir
• Citations: 1 (Details)

• Least Square Finite Element Model for Analysis of Multilayered Composite Plates under Arbitrary Boundary Conditions, World Journal of Engineering and Technology, Vol.12 No.1, 2024
• Christian Mathew, Yao Fu
• Citations: 1 (Details)

• Optimizing a Transportation System Using Metaheuristics Approaches (EGD/GA/ACO): A Forest Vehicle Routing Case Study, World Journal of Engineering and Technology, Vol.12 No.1, 2024
• Hossein Havaeji, Thien-My Dao, Tony Wong
• Citations: 1 (Details)

• Eigenstructure Assignment Method and Its Applications to the Constrained Problem, World Journal of Engineering and Technology, Vol.2 No.2, 2014
• H. Maarouf, A. Baddou
• Citations: 1 (Details)

• The Magnetic Properties of Zn_0.98Fe_0.02O with Additional Cu Doping, World Journal of Engineering and Technology, Vol.2 No.3, 2014
• Tongqin Chang, Yongqiang Wang
• Citations: 1 (Details)

• New Bio-Flocculatious Effect and Its Examination, World Journal of Engineering and Technology, Vol.2 No.2, 2014
• Zoltán Hodai, Dóra Rippel-Pethő, Géza Horváth, Laszló Hanák, Róbert Bocsi
• Citations: 1 (Details)

• Analysis and Design of an Obstacle Detection Radar Transceiver for ISM Band, World Journal of Engineering and Technology, Vol.1 No.1, 2013
• Bimal Garg, Dauood Saleem
• Citations: 1 (Details)

• Managing Dynamics in Corporate Networks, World Journal of Engineering and Technology, Vol.2 No.1, 2014
• Mike Danilovic, Mats Winroth
• Citations: 1 (Details)

• Simulation on Single Server & Distributed Environment (It’s Comparison & Issues), World Journal of Engineering and Technology, Vol.1 No.2, 2013
• A. Jawwad Memon, Wasi Ur Rehman
• Citations: 1 (Details)

• New Solution of Substrate Concentration in the Biosensor Response by Discrete Homotopy Analysis Method, World Journal of Engineering and Technology, Vol.1 No.3, 2013
• Seyyed Ali Madani Tonekaboni, Ali Shahbazi Mastan Abad, Shahab Karimi, Mitra Shabani
• Citations: 1 (Details)

• How Water-Development Nexus Can Reunite Central Asia?, World Journal of Engineering and Technology, Vol.2 No.3B, 2014
• Zulfiya Mamatova, Dilshod Ibrokhimov
• Citations: 1 (Details)

• Efficiency of Portable Electronic Vulcanizer, World Journal of Engineering and Technology, Vol.3 No.1, 2015
• Eduardo Zeta Ramis
• Citations: 1 (Details)

• Association of Protein Energy Wasting with Income in CKD Stage 3 Patients, World Journal of Engineering and Technology, Vol.3 No.3B, 2015
• Anita Saxena, Amit Gupta
• Citations: 1 (Details)

• Evaluation of Uncertainties Related to the Near Field Model of Geological Repository for Spent Nuclear Fuel, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Dana Barátová, Vladimír Nečas
• Citations: 1 (Details)

• Sketch of Renewable Energy Production Simulation Platform, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Jing Wang, Yunfeng Gao, Yuehui Huang, Yuefeng Wang, Jietan Zhang
• Citations: 1 (Details)

• Fault Diagnosis Technology Based on Model Driven, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Xie Zhang, Zufeng Xu, Jun Wu
• Citations: 1 (Details)

• Investigation Progressive Collapse Behaviour of Double Layer Barrel Vault Space Structures, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Mahdi Darvish Hashemi, Hadi Zarrintala
• Citations: 1 (Details)

• A Finite-Dimensional Integrable System Related to the Complex 3 × 3 Spectral Problem and the Coupled Nonlinear Schrödinger Equation, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Lanxin Chen, Junxian Zhang
• Citations: 1 (Details)

• Reasonable Drive Selecting of Parallel Mechanisms Based on Screw Theory, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Longqiang Qu, Guowei Pan, Wenliang Chen
• Citations: 1 (Details)

• Fabric Structure for Moisture Retention Property and Its Application in Civil Engineering, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• K. Thangamani, Prem Kumar
• Citations: 1 (Details)

• A Case Study to Estimate Thermal Conductivity of ABS in Cold Climate Chamber, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Umair N. Mughal, Marina Makarova, Muhammad Shakeel Virk, Geanette Polanco
• Citations: 1 (Details)

• Basic Concepts of Graph Theory as the Instruments of Mathematical Formalization of Woven Structures, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Otabek Kasimov
• Citations: 1 (Details)

• Selection of Stainless Steel for Cathode Plate in Hydrometallurgical Process, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Chi Zhang, Junyi Wu
• Citations: 1 (Details)

• The Research on the Analysis and Application of Detecting Underground Civil Air Defense with GPR, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Yongqing Yang, Xiaohui Sun
• Citations: 1 (Details)

• A Particle Swarm Optimization to Minimize Makespan for a Four-Stage Multiprocessor Open Shop with Dynamic Job Release Time, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Hui-Mei Wang, Fuh-Der Chou
• Citations: 1 (Details)

• Calculation of the Two High Voltage Transmission Line Conductors’ Minimum Distance, World Journal of Engineering and Technology, Vol.3 No.3C, 2015
• Wenjie Huang, Jinglin Zhu, Zhihang Du, Zheng Zhang
• Citations: 1 (Details)

• A Ge-Graded SiGe HBT with β > 100 and f_T = 67 GHz, World Journal of Engineering and Technology, Vol.3 No.4B, 2015
• Jing Zhang, Yonghui Yang, Guangbing Chen, Yuxin Wang, Dongbing Hu, Kaizhou Tan, Wei Cui, Zhaohuan Tang
• Citations: 1 (Details)

• Performance of High Indium Content InGaAs p-i-n Detector: A Simulation Study, World Journal of Engineering and Technology, Vol.3 No.4B, 2015
• Zhiwei Zhang, Guoqing Miao, Hang Song, Hong Jiang, Zhiming Li, Dabing Li, Xiaojuan Sun, Yiren Chen
• Citations: 1 (Details)

• Effect of Probabilistic Pattern on System Voltage Stability in Decentralized Hybrid Power System, World Journal of Engineering and Technology, Vol.3 No.4, 2015
• Nitin Kumar Saxena, Ashwani Kumar
• Citations: 1 (Details)

• Approach Thermal Habitat Assessment in N’Djamena in Chad, World Journal of Engineering and Technology, Vol.4 No.1, 2016
• Ahmat Charfadine, Mahamat Barka, Abakar Mahamat Tahir, Mohagir Ahmed Mohammed, Pr. Salif Gaye
• Citations: 1 (Details)

• Treatments for Temnocephalids Ectosymbiont Craspedella sp. on Cherax quadricarinatus and Cherax albertisii “Papua Freshwater Lobster”, World Journal of Engineering and Technology, Vol.3 No.4C, 2015
• Desy Sugiani, Angela Mariana Lusiastuti, Taukhid  , Uni Purwaningsih
• Citations: 1 (Details)

• An Approach to Calculate the Capacity of Pump-Hydro Combined Energy Storage with Wind Power Integration, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Su Wang, Shuai Shi, Kwoklun Lo, Jianfeng Lu
• Citations: 1 (Details)

• The Application of Access Management in Commercial Area, World Journal of Engineering and Technology, Vol.4 No.3C, 2016
• Siqi Gao, Xiaokuan Yang
• Citations: 1 (Details)

• 2D Part-Based Visual Tracking of Hydraulic Excavators, World Journal of Engineering and Technology, Vol.4 No.3C, 2016
• Bo Xiao, Ruiqi Chen, Zhenhua Zhu
• Citations: 1 (Details)

• Fractography Analysis of Monolithic Epoxy with Tailored Topography, World Journal of Engineering and Technology, Vol.4 No.4, 2016
• Rasheed Atif, Fawad Inam
• Citations: 1 (Details)

• Homocysteine and Cognitive Impairment in Thai Elderly, World Journal of Engineering and Technology, Vol.4 No.4, 2016
• Duangkamol Viroonudomphol, Saowanee Kajanachumpol, Chaiwat Prawettongsopon
• Citations: 1 (Details)

• Design of Tubular Azimuth Gamma Ray Logging Tool, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Jing Yang
• Citations: 1 (Details)

• Research of Magnetic Bias Control System Based on STATCOM, World Journal of Engineering and Technology, Vol.4 No.3D, 2016
• Zongqiang Zheng
• Citations: 1 (Details)

• Experimental Research and Finite Element Analysis on Setting Stiffening Rib of Corner Joints in Gabled Frames, World Journal of Engineering and Technology, Vol.4 No.3C, 2016
• Jin Cheng, Zuoquan Hong, Yu Wang
• Citations: 1 (Details)

• Application of Access Management Techniques to Large Shopping Mall in Beijing, World Journal of Engineering and Technology, Vol.4 No.3C, 2016
• Baiming Ding, Xiaokuan Yang
• Citations: 1 (Details)

• Analysis of Alkaline Foam to Water Temperature Model, World Journal of Engineering and Technology, Vol.4 No.3, 2016
• Zhen Xu, Lihong Zhao, Kai Tan
• Citations: 1 (Details)

• Intensification of the Banana Drying Processes by Using EFL Electromagnetic Waves, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Arif Memmedov, Teymuraz Abbasov, Mustafa Şeker
• Citations: 1 (Details)

• Heat Transfer Efficiency of Turbulent Film Boiling on a Horizontal Elliptical Tube with External Flowing Liquid, World Journal of Engineering and Technology, Vol.4 No.2, 2016
• Hai-Ping Hu
• Citations: 1 (Details)

• The Impact of Poverty Alleviation Policy on Urban Household Demand, World Journal of Engineering and Technology, Vol.5 No.2B, 2017
• Wen Yu, Muhammad Yaseen, Yu Wang, Shiwei Xu, Jiajia Liu, Liwei Gao, Peng Li
• Citations: 1 (Details)

• Dynamic Response Analysis of High-Speed Train Gearbox Housing Based on Equivalent Acceleration Amplitude Method, World Journal of Engineering and Technology, Vol.5 No.2, 2017
• Xiqiao Li, Xi Wang, Chang Xu, Guangquan Li
• Citations: 1 (Details)

• Investigation of Performance and Combustion Characteristics of DI Diesel Engine Fuelled with Ternary Fuel Blend at Different Injection Pressure, World Journal of Engineering and Technology, Vol.5 No.1, 2017
• Pani Sharanappa, Mallinath C. Navindgi
• Citations: 1 (Details)

• Compared Study of Authentic Culture on Three Guangdong Ancestral Temples, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Yifeng Wen
• Citations: 1 (Details)

• Identification of Patterns of Consumption through the Daily Mean Outdoor Temperature, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Aparicio-Ruiz Pablo, Guadix-Martín José, Onieva-Giménez Luis, Cortés-Achedad Pablo, Muñuzuri-Sanz Jesús
• Citations: 1 (Details)

• Electrode Effects on Polyurethane Soft Actuator, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Masato Ohmukai, Jun Kyokane
• Citations: 1 (Details)

• Effects of Impact Loads on Mechanical Performance for Truss Structure, World Journal of Engineering and Technology, Vol.5 No.3B, 2017
• Zongwei Zheng, Yin Bai
• Citations: 1 (Details)

• Experimental Analysis of Performance of Heat Exchanger with Plate Fins and Parallel Flow of Working Fluids, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Drilon Meha, Arben Avdiu, Fejzullah Krasniqi, Ali Muriqi, Xhevat Berisha
• Citations: 1 (Details)

• Acetylacetone-Based Electrolyte in Dye Sensitized Solar Cell, World Journal of Engineering and Technology, Vol.5 No.3, 2017
• Masato Ohmukai, Jun Kyokane
• Citations: 1 (Details)

• Steel Catenary Riser Fatigue Life Prediction Using Linearized Hydrodynamic Models, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• C. Ebunuoha, C. V. Ossia
• Citations: 1 (Details)

• Development of Jet Training FTD (Flight Training Device) Overhead System, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Daeil Jo, Yongjin Kwon
• Citations: 1 (Details)

• Finite Element Analysis Study of Prototype of a Novel Intramedullary Injectable Bioresorbable Polymer Fixator versus a Volar Plate for Surgical Treatment of Distal Radius Fractures, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Adam Zysk, Gladius Lewis
• Citations: 1 (Details)

• Creep Modelling of a Material by Non-Linear Modified Schapery’s Viscoelastic Model, World Journal of Engineering and Technology, Vol.5 No.4, 2017
• Priska Kuida Atchounga, Grégoire Kamdjo, Emmanuel Foadieng, Pierre Kisito Talla
• Citations: 1 (Details)