Volume 10, Number 4, April 2019 (Special Issue on Material Surface Engineering)

Cover Page, Table of Contents and Others: PDF (size: 2762KB)

• RETRACTED: Heterojunction Photoelectrode of Polyaniline/ZnS Film/ZnO Nanorod on FTO Glass ()
  Hyun Kim, B. Yang
  Materials Sciences and Applications Vol.10 No.4,  April 26, 2019
  DOI: 10.4236/msa.2019.104027    465 Downloads  973 Views   Citations
  This article belongs to the Special Issue on
• Formation of Copper Nickel Bimetallic Nanoalloy Film Using Precursor Inks ()
  Chaitanya G. Mahajan, Amanda Marotta, Bruce E. Kahn, Mark Irving, Surendra Gupta, Richard Hailstone, Scott A. Williams, Denis Cormier
  Materials Sciences and Applications Vol.10 No.4,  April 24, 2019
  DOI: 10.4236/msa.2019.104026    746 Downloads  1,708 Views   Citations
  This article belongs to the Special Issue on
• Carbon Fibre Reinforced Concrete: Dependency of Bond Strength on T_g of Yarn Impregnating Polymer ()
  Iris Kruppke, Marko Butler, Kai Schneider, Rolf-Dieter Hund, Viktor Mechtcherine, Chokri Cherif
  Materials Sciences and Applications Vol.10 No.4,  April 12, 2019
  DOI: 10.4236/msa.2019.104025    557 Downloads  1,614 Views   Citations
  This article belongs to the Special Issue on Material Surface Engineering
• Permanent Rare-Earth Magnets—The Need to Protect Them against Corrosion ()
  Célia Aparecida Lino dos Santos, Zehbour Panossian
  Materials Sciences and Applications Vol.10 No.4,  April 11, 2019
  DOI: 10.4236/msa.2019.104024    617 Downloads  1,165 Views   Citations
  This article belongs to the Special Issue on
• A Two-Step Crystallization Route for Hierarchical SAPO-34 Molecular Sieves: Unique Structural Features and Catalytic Property for DTO ()
  Guomin Li, Zhuo Li, Xiangzhong Ren, Yan Zhang, Zhiwen Chen, Jianqiang Yu
  Materials Sciences and Applications Vol.10 No.4,  April 11, 2019
  DOI: 10.4236/msa.2019.104023    604 Downloads  1,304 Views   Citations
  This article belongs to the Special Issue on
• Influence of Continuous Use of a Vacuum-Forming Machine for Mouthguard Thickness after Thermoforming: Effect of the Time Interval between Repeat Moldings ()
  Mutsumi Takahashi, Yogetsu Bando
  Materials Sciences and Applications Vol.10 No.4,  April 11, 2019
  DOI: 10.4236/msa.2019.104022    965 Downloads  1,347 Views   Citations
  This article belongs to the Special Issue on