Cutting - Articles - Scientific Research Publishing

Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2，May 31, 2023

DOI: 10.4236/mme.2023.132003 175 Downloads 602 Views Citations
Effects of Cutting Interval between Harvests on Dry Matter Yield and Nutritive Value in Alfalfa (Articles)

Doohong Min

American Journal of Plant Sciences Vol.7 No.8，June 17, 2016

DOI: 10.4236/ajps.2016.78118 2,574 Downloads 3,962 Views Citations
A Polynomial Algorithm of Optimum Cutting a Rectangle into Rectangles with Two Heights (Articles)

M. Z. Arslanov

American Journal of Operations Research Vol.4 No.1，January 23, 2014

DOI: 10.4236/ajor.2014.41003 4,010 Downloads 5,835 Views Citations
Vegetable and Mineral Used Oils as Cutting Fluids: Effect on Surface Roughness of Aluminum Alloy (Articles)

Nabeel Gharaibeh

J. of Surface Engineered Materials and Advanced Technology Vol.6 No.4，October 12, 2016

DOI: 10.4236/jsemat.2016.64016 3,290 Downloads 5,919 Views Citations
Influence of Cutting and Geometrical Parameters on the Cutting Force in Milling (Articles)

Hedi Yangui, Bacem Zghal, Amir Kessentini, Gaël Chevallier, Alain Rivière, Mohamed Haddar, Chafik Karra

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210097 7,978 Downloads 15,329 Views Citations
The P40 Cutting Tool Wear Modelization Machining Fk20MnCr5 (Articles)

Idriss Amara, Embarek Ferkous, Fayçal Bentaleb, Razika Aouad

Engineering Vol.3 No.9，September 23, 2011

DOI: 10.4236/eng.2011.39114 5,254 Downloads 9,099 Views Citations
Elucidation on Reactions Thermodynamics and Kinetics of OFC-A of Steels (Articles)

A.V. Adedayo

J. of Minerals and Materials Characterization and Eng. Vol.9 No.7，July 20, 2010

DOI: 10.4236/jmmce.2010.97043 3,607 Downloads 5,018 Views Citations
Evaluating the Impacts of Forest Clear Cutting on Water and Sediment Yields Using SWAT in Mississippi (Articles)

Sunita Khanal, Prem B. Parajuli

Journal of Water Resource and Protection Vol.5 No.4，April 25, 2013

DOI: 10.4236/jwarp.2013.54047 5,638 Downloads 10,136 Views Citations
Identifying Optimal Cutting Parameters in Drilling of Titanium Aluminum Vanadium Using Finite Element Analysis (Articles)

M. M. Reddy, S. R. Kostka, N. S. Reddy

J. of Surface Engineered Materials and Advanced Technology Vol.10 No.3，July 12, 2020

DOI: 10.4236/jsemat.2020.103004 395 Downloads 1,074 Views Citations
The Biology of Szelenyiopria talitae (Hymenoptera: Diapriidae): Larval Parasitoid of the Leaf-Cutting Ant Acromyrmex subterraneus (Hymenoptera: Formicidae) (Articles)

Thalles Cardoso Mattoso, Denise Delores Oliveira Moreira, Thais Berçot Pontes Teodoro, Claudio Luiz Moreira de Souza, Rita de Kássia Guarnier da Silva, Veronica de Morais, Carlos Peres Silva, Milton Erthal Jr., Richard Ian Samuels

Advances in Entomology Vol.9 No.3，July 26, 2021

DOI: 10.4236/ae.2021.93012 305 Downloads 1,048 Views Citations
Assessment of Female Genital Cutting Practice and Its Drivers among Women of Reproductive Age in a Rural Community in South-West Nigeria (Articles)

Rachael Y. Ogunseun, Akintunde O Fehintola, Temitope Ilori, Akinfolarin C. Adepiti, Elizabeth O. Olagunju, Adekemi Olowokere, Caleb A Adegbenro, Anu S. Olowookere

Open Journal of Obstetrics and Gynecology Vol.14 No.12，December 23, 2024

DOI: 10.4236/ojog.2024.1412154 17 Downloads 102 Views Citations
Artificial Logging or Natural Growth (Articles)

Ziyi Wang, Jiaxin Lu, Fuxing Chu, Xiangrui Li

Open Journal of Applied Sciences Vol.12 No.7，July 15, 2022

DOI: 10.4236/ojapps.2022.127081 156 Downloads 581 Views Citations
Cutting and other forms of derma-abuse in adolescents (Articles)

Hari D. Maharajh, Rainah Seepersad

Health Vol.2 No.4，May 4, 2010

DOI: 10.4236/health.2010.24055 5,823 Downloads 11,890 Views Citations
Optimization of Surface Milling of Hardened AISI4340 Steel with Minimal Fluid Application Using a High Velocity Narrow Pulsing Jet of Cutting Fluid (Articles)

K. Leo Dev Wins, A. S. Varadarajan, B. Ramamoorthy

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210102 5,228 Downloads 9,816 Views Citations
Deep-Sea Cobalt Crusts Water Jet Cutting Ability (Articles)

Zhonghua Huang, Ya Xie

Geomaterials Vol.1 No.2，July 29, 2011

DOI: 10.4236/gm.2011.12007 6,223 Downloads 10,758 Views Citations
Improvement Properties of the Cutting Tools Using Technical Plasma Treatment (Articles)

Ferkous Embarek, Amara Idriss, Djeribaa Abdeldjalil, Boughouas Hamlaoui, Achour Slimane

Materials Sciences and Applications Vol.2 No.10，October 17, 2011

DOI: 10.4236/msa.2011.210197 4,642 Downloads 7,958 Views Citations
Improved Balas and Mazzola Linearization for Quadratic 0-1 Programs with Application in a New CuttingPlane Algorithm (Articles)

Wajeb Gharibi

Int'l J. of Communications, Network and System Sciences Vol.5 No.4，April 19, 2012

DOI: 10.4236/ijcns.2012.54026 4,677 Downloads 7,071 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

J. of Minerals and Materials Characterization and Eng. Vol.10 No.13，November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 3,903 Downloads 6,156 Views Citations
Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64 (Articles)

Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair

Journal of Materials Science and Chemical Engineering Vol.2 No.7，July 8, 2014

DOI: 10.4236/msce.2014.27004 2,430 Downloads 3,840 Views Citations
Heat Resistant Properties of Some Elements-Incorporated Diamond-Like Carbon Films and Their Trial Applications for Micro End Mill Coatings (Articles)

Chavin Jongwannasiri, Nutthanun Moolsradoo, Shuichi Watanabe

Materials Sciences and Applications Vol.6 No.1，January 7, 2015

DOI: 10.4236/msa.2015.61002 2,686 Downloads 3,503 Views Citations

<12 3 ...>

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies