Department of Materials Engineering, McGill University, Montreal, Canada - Articles

Assessment of the Environmental Impacts of COVID-19 in Urban Areas—A Case Study of Iran (Articles)

Fatemeh Rezaeitavabe, Majid Sartaj, Mohammad Asadi Tokmedash, Nasser Talebbeydokhti

Journal of Environmental Protection Vol.12 No.5，May 27, 2021

DOI: 10.4236/jep.2021.125021 450 Downloads 2,173 Views Citations
Ultrasonic Fatigue of Ti₄₀Zr₁₀Cu₃₄Pd₁₄Sn₂ Glassy Alloy (Articles)

Shin-ichi Yamaura, Shengli Zhu, Katsuhiro Abe, Guoqiang Xie

Open Journal of Metal Vol.4 No.3，August 27, 2014

DOI: 10.4236/ojmetal.2014.43007 4,074 Downloads 5,129 Views Citations
Evaluation of the Influence of Fibre Aspect Ratio and Fibre Content on the Rheological Characteristic of High Yield Pulp Fibre Reinforced Polyamide 11 “HYP/PA11” Green Composite (Articles)

Robenson Cherizol, Mohini Sain, Jimi Tjong

Open Journal of Polymer Chemistry Vol.5 No.1，January 19, 2015

DOI: 10.4236/ojpchem.2015.51001 4,825 Downloads 6,296 Views Citations
Review of Non-Newtonian Mathematical Models for Rheological Characteristics of Viscoelastic Composites (Articles)

Robenson Cherizol, Mohini Sain, Jimi Tjong

Green and Sustainable Chemistry Vol.5 No.1，January 28, 2015

DOI: 10.4236/gsc.2015.51002 7,209 Downloads 10,450 Views Citations
Modeling the Rheological Characteristics of Flexible High-Yield Pulp-Fibre-Reinforced Bio-Based Nylon 11 Bio-Composite (Articles)

Robenson Cherizol, Mohini Sain, Jimi Tjong

Journal of Encapsulation and Adsorption Sciences Vol.5 No.1，February 3, 2015

DOI: 10.4236/jeas.2015.51001 3,759 Downloads 4,836 Views Citations
Effect of Lithium Chloride on the Fibre Length Distribution, Processing Temperature and the Rheological Properties of High-Yield-Pulp-Fibre-Reinforced Modified Bio-Based Polyamide 11 Composite (Articles)

Robenson Cherizol, Mohini Sain, Jimi Tjong

Advances in Nanoparticles Vol.6 No.2，April 13, 2017

DOI: 10.4236/anp.2017.62005 1,529 Downloads 2,691 Views Citations
Detection of Ventricular Fibrillation Using Random Forest Classifier (Articles)

Anurag Verma, Xiaodai Dong

Journal of Biomedical Science and Engineering Vol.9 No.5，April 19, 2016

DOI: 10.4236/jbise.2016.95019 3,246 Downloads 5,827 Views Citations
Model for Quantitative Analysis of Phosphorus Removed during Leaching of Iron Oxide Ore in Oxalic Acid Solution (Articles)

C. I. Nwoye, C. N. Mbah, C. C. Nwakwuo, A. I. Ogbonna

J. of Minerals and Materials Characterization and Eng. Vol.9 No.4，April 20, 2010

DOI: 10.4236/jmmce.2010.94024 5,322 Downloads 6,697 Views Citations
Mathematical and Numerical Modelling of Copper Tube Extrusion after Optimizing Geometrical and Operating Parameters (Articles)

Ngoy Moïse Raphaël Moramess, Mulaja Tshakatumba Constantin, Tshipeshi Makina Héritier, Ntambwe Sapu Aaron, Tubadi Diamba José, Mwema Mutamba Edouard

J. of Minerals and Materials Characterization and Eng. Vol.10 No.2，March 11, 2022

DOI: 10.4236/jmmce.2022.102010 291 Downloads 1,056 Views Citations
Effects of Graphite Additions and Heat Treatment on the Microstructure, Mechanical and Tribological Properties of 13% Chromium White Iron (Articles)

J. O. Agunsoye, S. A. Bello, I. O. Awe, A. A. Yekinni, R. G. Adeyemo, A. O. Ologunagba

J. of Minerals and Materials Characterization and Eng. Vol.2 No.4，July 10, 2014

DOI: 10.4236/jmmce.2014.24032 2,745 Downloads 3,882 Views Citations
Sliding Wear Performance Evaluation of Red Mud (RM), RM + Fly Ash (FA) and RM + FA + Al Coatings on Mild Steel (Articles)

Harekrushna Sutar, Debashis Roy, Subash Chandra Mishra, Rabi Ranjan Murmu

Materials Sciences and Applications Vol.7 No.3，March 21, 2016

DOI: 10.4236/msa.2016.73017 2,884 Downloads 4,024 Views Citations
Comparative Studies on Synthesis and Characterization of Titania and Iron Oxide Doped Magnesia from Indian Salem Magnesite (Articles)

Sukriti Manna, Tamoghna Chakrabarti

Journal of Materials Science and Chemical Engineering Vol.4 No.7，July 25, 2016

DOI: 10.4236/msce.2016.47010 2,163 Downloads 3,154 Views Citations
Effect of Red Mud (RM) Reinforcement on Physio-Chemical Characteristics of Ordinary Portland Slag Cement (OPSC) Mortar (Articles)

Harekrushna Sutar, Rabiranjan Murmu, Debashis Roy, Subash Chandra Mishra, Asmita Mishra

Advances in Materials Physics and Chemistry Vol.6 No.8，July 28, 2016

DOI: 10.4236/ampc.2016.68023 2,191 Downloads 3,594 Views Citations
Effects of Electrode Types on the Microstructure, Tensile and Hardness Properties of 304 L Austenitic Stainless Steel Heat-Affected Zone (HAZ) (Articles)

Bolarinwa Johnson Kutelu, Emmanuel Gbolade Adubi, Saliu Ojo Seidu

J. of Minerals and Materials Characterization and Eng. Vol.6 No.5，August 31, 2018

DOI: 10.4236/jmmce.2018.65038 1,078 Downloads 2,427 Views Citations
Development of an In-Situ Composite Doped Coating for Corrosion Protection and Mechanical Properties Enhancements in Process Engineering (Articles)

Oluwasegun T. Joshua, Ojo S. I. Fayomi, Enejoh T. Omeje

J. of Minerals and Materials Characterization and Eng. Vol.7 No.4，July 22, 2019

DOI: 10.4236/jmmce.2019.74013 584 Downloads 1,400 Views Citations
Wettability, Thermal and Sliding Behavior of Thermally Sprayed Fly Ash Premixed Red Mud Coatings on Mild Steel (Articles)

Harekrushna Sutar, Birupakshya Mishra, Rabiranjan Murmu, Sangram Patra, Sarat Chandra Patra, Subash Chandra Mishra, Debashis Roy

Materials Sciences and Applications Vol.11 No.1，December 31, 2019

DOI: 10.4236/msa.2020.111002 575 Downloads 1,401 Views Citations
Effect of Cavity Dimensions on TE_01δ Mode Resonance in Split-Post Dielectric Resonator Techniques (Articles)

Fang Chen, Sheng Mao, Xiaohui Wang, Elena Semouchkina, Michael Lanagan

Journal of Electromagnetic Analysis and Applications Vol.4 No.9，September 20, 2012

DOI: 10.4236/jemaa.2012.49050 6,265 Downloads 9,206 Views Citations
Development of an Environmentally Friendly in-situ Pack-Cyaniding Technique (Articles)

K. J. Akinluwade, A. R. Adetunji, M. O. Adeoye, L. E. Umoru, P. N. Kalu, A. T. Taiwo, O. O. Adewoye

J. of Minerals and Materials Characterization and Eng. Vol.11 No.1，January 20, 2012

DOI: 10.4236/jmmce.2012.111002 5,273 Downloads 6,858 Views Citations
Microstructure and Quasi-Static Mechanical Behavior of Cryoforged AA2519 Alloy (Articles)

Amin Azimi, Gbadebo Moses Owolabi, Hamid Fallahdoost, Nikhil Kumar, Horace Whitworth

Materials Sciences and Applications Vol.10 No.2，January 30, 2019

DOI: 10.4236/msa.2019.102011 987 Downloads 2,133 Views Citations
Identifying Optimal Cutting Parameters in Drilling of Titanium Aluminum Vanadium Using Finite Element Analysis (Articles)

M. M. Reddy, S. R. Kostka, N. S. Reddy

J. of Surface Engineered Materials and Advanced Technology Vol.10 No.3，July 12, 2020

DOI: 10.4236/jsemat.2020.103004 440 Downloads 1,192 Views Citations

<...404142 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies