Department of Mechanical Engineering, Malnad College of Engineering, Hassan, India - Articles

Fatigue Life Estimation of an Elastomeric Pad by ε-N Curve and FEA (Articles)

Baban Suryatal, Haribhau Phakatkar, Kasilingam Rajkumar, Ponniah Thavamani

J. of Surface Engineered Materials and Advanced Technology Vol.5 No.2，March 27, 2015

DOI: 10.4236/jsemat.2015.52010 6,054 Downloads 7,888 Views Citations
Synthesis and Characterization of Ultrafine Grained 304 Stainless Steel through Machining (Articles)

V. Senthilkumar, K. Lenin

J. of Minerals and Materials Characterization and Eng. Vol.10 No.5，April 20, 2011

DOI: 10.4236/jmmce.2011.105034 6,456 Downloads 7,889 Views Citations
Design and Comparison of Genetic Algorithms for Mixed-Model Assembly Line Balancing Problem with Original Task Times of Models (Articles)

Panneerselvam Sivasankaran, Peer Mohamed Shahabudeen

American Journal of Industrial and Business Management Vol.6 No.5，May 31, 2016

DOI: 10.4236/ajibm.2016.65063 2,193 Downloads 3,647 Views Citations
A Survey on Effect of Agro Waste Ash as Reinforcement on Aluminium Base Metal Matrix Composites (Articles)

Prasanna P. Kulkarni, B. Siddeswarappa, Kariyappla Shivashankar Hemanth Kumar

Open Journal of Composite Materials Vol.9 No.3，July 31, 2019

DOI: 10.4236/ojcm.2019.93019 1,959 Downloads 4,142 Views Citations
Taguchi Technique for the Simultaneous Optimization of Tribological Parameters in Metal Matrix Composite (Articles)

Kumar.T.R. Hemanth, R.P. Swamy, T.K. Chandrashekar

J. of Minerals and Materials Characterization and Eng. Vol.10 No.12，October 10, 2011

DOI: 10.4236/jmmce.2011.1012090 6,294 Downloads 8,684 Views Citations
Design and Structural Analysis of Flexible Wearable Chair Using Finite Element Method (Articles)

Ashutosh Bijalwan, Anadi Misra

Open Journal of Applied Sciences Vol.6 No.7，July 29, 2016

DOI: 10.4236/ojapps.2016.67047 2,797 Downloads 6,701 Views Citations
Prediction of Natural Frequency of Laminated Composite Plates Using Artificial Neural Networks (Articles)

Mutra Raja Sekhara Reddy, Bathini Sidda Reddy, Vanguru Nageswara Reddy, Surisetty Sreenivasulu

Engineering Vol.4 No.6，June 19, 2012

DOI: 10.4236/eng.2012.46043 7,327 Downloads 13,609 Views Citations
Design Optimization of Shell and Tube Heat Exchanger by Vibration Analysis (Articles)

S. H. Gawande, A. A Keste, L. G Navale, M. R Nandgaonkar, V. J Sonawane, U. B Ubarhande

Modern Mechanical Engineering Vol.1 No.1，August 17, 2011

DOI: 10.4236/mme.2011.11002 19,098 Downloads 45,558 Views Citations
Microstructure and Mechanical Properties of as Cast Aluminium Alloy 7075/Basalt Dispersed Metal Matrix Composites (Articles)

S. Ezhil Vannan, S. Paul Vizhian

J. of Minerals and Materials Characterization and Eng. Vol.2 No.3，April 30, 2014

DOI: 10.4236/jmmce.2014.23023 5,339 Downloads 8,352 Views Citations
Influence of Nano-Modification on the Interlaminar Shear Strength of Unidirectional Glass Fiber-Reinforced Epoxy Resin (Articles)

M. Rajanish, N. V. Nanjundaradhya, Ramesh S. Sharma

J. of Minerals and Materials Characterization and Eng. Vol.2 No.4，July 10, 2014

DOI: 10.4236/jmmce.2014.24031 3,721 Downloads 4,782 Views Citations
Performance, Emission and Combustion Characteristics of Dual Fuel (DF) Engine Fuelled with Hydrogen Induction and Injection of Honne and Honge Methyl Esters (Articles)

Rajshekhar S. Hosmath, Nagaraj R. Banapurmath, Mallikarjuna Bhovi, Sanjeevkumar V. Khandal, Ajitkumar P. Madival, Shashikumar S. Dhannur, Varunkumar Gundalli

Energy and Power Engineering Vol.7 No.9，August 20, 2015

DOI: 10.4236/epe.2015.79036 2,781 Downloads 4,297 Views Citations
This article belongs to the Special Issue on Hydrogen Energy
A Review on Mechanical Properties of Natural Fiber Reinforced Hybrid Polymer Composites (Articles)

K. P. Ashik, Ramesh S. Sharma

J. of Minerals and Materials Characterization and Eng. Vol.3 No.5，September 21, 2015

DOI: 10.4236/jmmce.2015.35044 18,703 Downloads 27,219 Views Citations
CFD Analysis on Fluidized Bed Gasification of Rice Husk and Rice Straw (Articles)

Singh Pushpendra, A. K. Srivastava

Open Access Library Journal Vol.4 No.2，February 27, 2017

DOI: 10.4236/oalib.1103372 1,202 Downloads 2,563 Views Citations
Design, Manufacture and Measurements of Beta-Type Stirling Engine with Rhombic Drive Mechanism (Articles)

Mohammed Yunus, Mohammad S. Alsoufi, Anil Kumar Rathod

Modern Mechanical Engineering Vol.6 No.4，November 30, 2016

DOI: 10.4236/mme.2016.64012 5,786 Downloads 13,529 Views Citations
Mechanical Properties of Potassium Titanate Whisker Reinforced Epoxy Resin Composites (Articles)

M. Sudheer, K. M. Subbaya, Dayananda Jawali, Thirumaleshwara Bhat

J. of Minerals and Materials Characterization and Eng. Vol.11 No.2，February 20, 2012

DOI: 10.4236/jmmce.2012.112016 7,088 Downloads 9,865 Views Citations
The Role of Fillers on Friction and Slide Wear Characteristics in Glass-Epoxy Composite Systems (Articles)

B. Suresha, G. Chandramohan, J. N. Prakash, V. Balusamy, K. Sankaranarayanasamy

J. of Minerals and Materials Characterization and Eng. Vol.5 No.1，June 12, 2006

DOI: 10.4236/jmmce.2006.51006 6,907 Downloads 9,989 Views Citations
Design Optimization of Cam & Follower Mechanism of an Internal Combustion Engine for Improving the Engine Efficiency (Articles)

Mahesh R. Mali, Prabhakar D. Maskar, Shravan H. Gawande, Jay S. Bagi

Modern Mechanical Engineering Vol.2 No.3，August 31, 2012

DOI: 10.4236/mme.2012.23014 16,821 Downloads 29,985 Views Citations
Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis (Articles)

Shouvik Ghosh, Prasanta Sahoo, Goutam Sutradhar

J. of Minerals and Materials Characterization and Eng. Vol.11 No.11，November 30, 2012

DOI: 10.4236/jmmce.2012.1111115 6,573 Downloads 10,902 Views Citations
Selection of Best Materials and Parametric Optimization of Solar Parabolic Collector Using Fuzzy Logic (Articles)

Sri P. Mohana Reddy, Pathi Venkataramaiah, Devuru Vishnu Vardhan Reddy

Energy and Power Engineering Vol.6 No.14，December 12, 2014

DOI: 10.4236/epe.2014.614046 3,859 Downloads 5,447 Views Citations
Vibration Annihilation of Sandwiched Beam with MROF DTSMC (Articles)

Vivek Rathi, Ahmad Ali Khan

Engineering Vol.9 No.9，September 21, 2017

DOI: 10.4236/eng.2017.99046 1,073 Downloads 2,011 Views Citations

<...345 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies