[1]
|
H. Ahlatci, E. Candan and H. Cimenoglu, “Abrasive Wear Behaviour and Mechanical Properties of Al-Si/SiC Composites,” Wear, Vol. 257, No. 5-6, 2004, pp. 625-632.
doi:10.1016/j.wear.2004.03.006
|
[2]
|
K. S. Al-Rubaie, H. Goldenstein and J. D. Biasoli de Mello, “Three-Body Abrasion of Al-SiC Composites,” Wear, Vol. 225-229, 1999, pp. 163-173.
doi:10.1016/S0043-1648(99)00009-5
|
[3]
|
K. S. Al-Rubaie, H. N. Yoshimura and J. D. Biasoli de Mello, “Two-Body Abrasive Wear of Al-SiC Compos- ites,” Wear, Vol. 233-235, 1999, pp. 444-454.
doi:10.1016/S0043-1648(99)00185-4
|
[4]
|
M. Bai, Q. Xue, X. Wang, Y. Wan and W. Liu, “Wear Mechanism of SiC Whisker-Reinforced 2024 Aluminum Alloy Matrix Composites in Oscillating Sliding Wear Tests,” Wear, Vol. 185, No. 1-2, 1995, pp. 197-202.
doi:10.1016/0043-1648(95)06617-9
|
[5]
|
M. Bai, Q. Xue and Q. Ge, “Wear of 2024 Al-Mo-SiC Composites under Lubrication,” Wear, Vol. 195, No. 1-2, 1996, pp. 100-105. doi:10.1016/0043-1648(95)06808-2
|
[6]
|
M. Bai and Q. Xue, “Investigation of Wear Mechanism of SiC Particulate-Reinforced Al-20Si-3Cu-1Mg Aluminium Matrix Composites under Dry Sliding and Water Lubri- cation,” Tribology International, Vol. 30, No. 4, 1997, pp. 261-269. doi:10.1016/S0301-679X(96)00047-3
|
[7]
|
H. Chen and A. T. Alpas, “Wear of Aluminium Matrix Composites Reinforced with Nickel-Coated Carbon Fi- bers,” Wear, Vol. 192, No. 1-2, 1996, pp. 186-198.
doi:10.1016/0043-1648(95)06795-7
|
[8]
|
R. Chen, A. Iwabuchi, T. Shimizu, H. S. Shin and H. Mifune, “The Sliding Wear Resistance Behavior of NiAI and SiC Particles Reinforced Aluminum Alloy Matrix Composites”, Wear, Vol. 213, No. 1-2, 1997, pp. 175-184.
doi:10.1016/S0043-1648(97)00123-3
|
[9]
|
R. Chen, A. Iwabuchi and T. Shimizu, “The Effect of a T6 Heat Treatment on the Fretting Wear of a SiC Parti- cle-Reinforced A356 Aluminium Alloy Matrix Composite”, Wear, Vol. 238, No. 2, 2000, pp. 110-119.
doi:10.1016/S0043-1648(99)00328-2
|
[10]
|
S. K. Ghosh and P. Saha, “Crack and Wear Behaviour of SiC Particulate Reinforced Aluminium Based Metal Ma- trix Composite Fabricated by Direct Metal Laser Sintering Process,” Materials and Design, Vol. 32, No. 1, 2011, pp. 139-145. doi:10.1016/j.matdes.2010.06.020
|
[11]
|
A. M. Hassan, A. Alrashdan, M. T. Hayajneh and A. T. Mayyas, “Wear Behaviour of Al-Mg-Cu-Based Compo- sites Containing SiC Particles,” Tribology International, Vol. 42, No. 8, 2009, pp. 1230-1238.
doi:10.1016/j.triboint.2009.04.030
|
[12]
|
Y. Iwai, H. Yoneda and T. Honda, “Sliding Wear Behaviour of Sic Whisker-Reinforced Aluminium Composite,” Wear, Vol. 181-183, No. 2, 1995, pp. 594-602.
|
[13]
|
J. K. M. Kwok and S. C. Lim, “High-Speed Tribological Properties of Some Al/SiCp Composites: I. Frictional and Wear-Rate Characteristics”, Composites Science and Technology, Vol. 59, No. 1, 1999, pp. 55-63.
doi:10.1016/S0266-3538(98)00055-4
|
[14]
|
G. Straffelini, M. Pellizzari and A. Molinari, “Influence of Load and Temperature on the Dry Sliding Behavior of Al-Based Metal-Matrix-Composites Against Friction Ma- terial”, Wear, Vol. 256, No. 7-8, 2004, pp. 754-763.
doi:10.1016/S0043-1648(03)00529-5
|
[15]
|
R. N. Rao and S. Das, “Effect of Matrix Alloy and Influence of SiC Particle on the Sliding Wear Characteristics of Aluminium Alloy Composites,” Materials and Design, Vol. 31, No. 3, 2010, pp. 1200-1207.
doi:10.1016/j.matdes.2009.09.032
|
[16]
|
R. N. Rao and S. Das, “Effect of Sliding Distance on the Wear and Friction Behaviour of as Cast and Heat-Treated Al-SiCp Composites,” Materials and Design, Vol. 32, No. 5, 2011, pp. 3051-3058.
doi:10.1016/j.matdes.2011.01.033
|
[17]
|
S. C. Sharma, B. M. Girish, R. Kamath and B. M. Satish, “Effect of SiC Particle Reinforcement on the Unlubri- cated Sliding Wear Behaviour of ZA-27 Alloy Composites”, Wear, Vol. 213, No. 1-2, 1997, pp. 33-40.
doi:10.1016/S0043-1648(97)00185-3
|
[18]
|
B. S. Unlu, “Investigation of Tribological and Mechanical Properties Al2O3-SiC Reinforced Al Composites Manu- factured by Casting or P/M Method,” Materials and Design, Vol. 29, No. 10, 2008, pp. 2002-2008.
doi:10.1016/j.matdes.2008.04.014
|
[19]
|
B. Venkataraman and G. Sundararajan, “The Sliding Wear Behaviour of Al-SiC Particulate Composite-I Macro Behaviour,” Acta Materialia, Vol. 44, No. 2, 1996, pp. 451-460. doi:10.1016/1359-6454(95)00217-0
|
[20]
|
B. Venkataraman and G. Sundararajan, “The Sliding Wear Behaviour of Al-SiC Particulate Composite II—The Characterization of Subsurface Deformation and Correlation with Wear Behavior,” Acta Materialia, Vol. 44, No. 2, 1996, pp. 461-473. doi:10.1016/1359-6454(95)00218-9
|
[21]
|
Y. Yalcin and H. Akbulut, “Dry Wear Properties of A356-SiC Particle Reinforced MMCs Produced by Two Melting Routes,” Materials and Design, Vol. 27, No. 10, 2006, pp. 872-881. doi:10.1016/j.matdes.2005.03.007
|
[22]
|
Z. Hasan, R. Pandey and D. Sehgal, “Wear Characteristics in Al-SiC Particulate Composites and the Al-Si Piston Alloy,” Journal of Minerals and Materials Characterization and Engineering, Vol. 10, No. 14, 2011, pp. 1329-1335.
|
[23]
|
M. Singla, L. Singh and V. Chawla, “Study of Wear Properties of Al-SiC Composites,” Journal of Minerals and Materials Characterization and Engineering, Vol. 8, No. 10, 2009, pp. 813-821.
|
[24]
|
G. Taguchi, “Introduction to Quality Engineering,” Asian Productivity Organization, Tokyo, 1990.
|
[25]
|
P. J. Ross, “Taguchi Technique for Quality Engineering,” 2nd Edition, McGraw Hill, New York, 1996.
|
[26]
|
D. C. Montgomery, “Design and Analysis of Experiments,” John Wiley Sons, New York, 2001.
|
[27]
|
R. A. Fisher, “Design of Experiments,” Oliver & Boyd, Edinburgh, 1951.
|
[28]
|
Minitab User Manual, “Making Data Analysis Easier,” Minitab Inc., Pennsylvania State University, Pennsylvania, 2001
|