Department of Mechanical and Systems Engineering, University of Hyogo, Himeji, Japan - Articles

Study of Dialyzer Membrane (Polyflux 210H) and Effects of Different Parameters on Dialysis Performance (Articles)

Md Shihamul Islam, Jerzy Szpunar

Open Journal of Nephrology Vol.3 No.3，September 10, 2013

DOI: 10.4236/ojneph.2013.33029 6,400 Downloads 11,191 Views Citations
Kite Modeling for Higher Altitude Wind Energy (Articles)

Hong Zhang

Energy and Power Engineering Vol.5 No.7，September 18, 2013

DOI: 10.4236/epe.2013.57052 8,097 Downloads 11,657 Views Citations
Recrystallization Kinetics and Microstructure Evolution of Annealed Cold-Drawn Low-Carbon Steel (Articles)

Nurudeen A. Raji, Oluleke O. Oluwole

Journal of Crystallization Process and Technology Vol.3 No.4，October 31, 2013

DOI: 10.4236/jcpt.2013.34025 6,972 Downloads 11,027 Views Citations
Optimization of the Annealing Parameters for Improved Tensile Properties in Cold Drawn 0.12 wt% C Steel (Articles)

Nurudeen A. Raji, Oluleke O. Oluwole

Engineering Vol.5 No.11，November 6, 2013

DOI: 10.4236/eng.2013.511106 3,279 Downloads 4,831 Views Citations
A parameterized analysis of the mechanical stress for co-ronary plaque fibrous caps (Articles)

Ramses Galaz, Catherine Pagiatakis, Emmanuel Gaillard, Rosaire Mongrain

Journal of Biomedical Science and Engineering Vol.6 No.12A，December 17, 2013

DOI: 10.4236/jbise.2013.612A006 2,893 Downloads 4,710 Views Citations
This article belongs to the Special Issue on Modeling and Simulation in Tissue Biomechanics
Forced Convection Thermal Boundary Layer Transfer for Non-Isothermal Surfaces Using the Modified Merk Series (Articles)

Ayodeji Falana, Richard Olayiwola Fagbenle

Open Journal of Fluid Dynamics Vol.4 No.2，June 27, 2014

DOI: 10.4236/ojfd.2014.42018 3,528 Downloads 4,917 Views Citations
Regression Analysis of Ashaka Clay-Bonded Sand (Articles)

Aondona-Paul Ihom, Aniekan Offiong

J. of Minerals and Materials Characterization and Eng. Vol.2 No.5，September 25, 2014

DOI: 10.4236/jmmce.2014.25053 4,263 Downloads 5,181 Views Citations
The Study of Green Compression Strength of a Green Sand Mould Using Statistical Approach (Articles)

Aondona Paul Ihom, Aniekan Offiong

Materials Sciences and Applications Vol.5 No.12，October 21, 2014

DOI: 10.4236/msa.2014.512089 13,880 Downloads 15,727 Views Citations
Real-Time Modelling of Dynamic Behaviour for Clinker Rotary Kilns: Learning from Experiment and Theory (Articles)

Tarasiewicz Stanislaw, Yoboué Guillaume N’zi

Advances in Pure Mathematics Vol.4 No.10，October 30, 2014

DOI: 10.4236/apm.2014.410064 3,657 Downloads 4,658 Views Citations
This article belongs to the Special Issue on Partial Differential Equation
Selection of Best Materials and Parametric Optimization of Solar Parabolic Collector Using Fuzzy Logic (Articles)

Sri P. Mohana Reddy, Pathi Venkataramaiah, Devuru Vishnu Vardhan Reddy

Energy and Power Engineering Vol.6 No.14，December 12, 2014

DOI: 10.4236/epe.2014.614046 3,859 Downloads 5,447 Views Citations
Optimum Combination of Femoral Head Size, Femoral Head Material, and Acetabular Cup Liner’s Highly-Cross-Linked Polyethylene Brand for Hip Implant (Articles)

Gladius Lewis, Daniel M. Werdofa

Journal of Biomedical Science and Engineering Vol.8 No.1，January 16, 2015

DOI: 10.4236/jbise.2015.81003 4,254 Downloads 5,641 Views Citations
An ARX-Based PID-Sliding Mode Control on Velocity Tracking Control of a Stick-Slip Pi-ezoelectric-Driven Actuator (Articles)

Y. Cao, X. B. Chen

Modern Mechanical Engineering Vol.5 No.1，February 11, 2015

DOI: 10.4236/mme.2015.51002 4,721 Downloads 5,955 Views Citations
Flow Simulation to Determine the Effects of Shrouds on the Performance of Wind Turbines (Articles)

Peter E. Jenkins, Abdalfadel Younis

Journal of Power and Energy Engineering Vol.4 No.8，August 31, 2016

DOI: 10.4236/jpee.2016.48008 2,840 Downloads 5,143 Views Citations
This article belongs to the Special Issue on Heat Energy
Thermal Performance of MR-16 Light Emitting Diode Products (Articles)

Michael Beck, Heather Dillon, Belinda Li

Journal of Electronics Cooling and Thermal Control Vol.6 No.4，October 11, 2016

DOI: 10.4236/jectc.2016.64012 1,777 Downloads 2,820 Views Citations
The Use of Genetic Approach to the Kinematics of Cutting (Articles)

Nabil Wanas Musa

World Journal of Mechanics Vol.6 No.10，October 25, 2016

DOI: 10.4236/wjm.2016.610028 1,566 Downloads 2,729 Views Citations
Reduction in the Corrosion Rate of Magnesium and Magnesium Alloy Specimens and Implications for Plain Fully Bioresorbable Coronary Artery Stents: A Review (Articles)

Gladius Lewis

World Journal of Engineering and Technology Vol.4 No.4，November 9, 2016

DOI: 10.4236/wjet.2016.44055 2,239 Downloads 4,341 Views Citations
Part II of New Basic Theory of Gravity (Articles)

Hubert J. Veringa

Journal of Modern Physics Vol.7 No.16，December 5, 2016

DOI: 10.4236/jmp.2016.716195 1,528 Downloads 2,780 Views Citations
Elastic Bending Deformation of the Drill Strings in Channels of Curve Wells (Articles)

Nabil Wanas Musa

Modern Mechanical Engineering Vol.7 No.1，February 6, 2017

DOI: 10.4236/mme.2017.71001 1,996 Downloads 3,270 Views Citations
The Barrier Properties of Flake-Filled Composites with Precise Control of Flake Orientation (Articles)

A. Tsiantis, T. D. Papathanasiou

Materials Sciences and Applications Vol.8 No.3，March 9, 2017

DOI: 10.4236/msa.2017.83016 1,380 Downloads 2,488 Views Citations
This article belongs to the Special Issue on Additive Manufacturing Materials
Design and Analysis of a Dual Rotor Turbine with a Shroud Using Flow Simulations (Articles)

Peter E. Jenkins, Abdalfadel Younis, Yuxuan Chen

Journal of Power and Energy Engineering Vol.5 No.4，April 30, 2017

DOI: 10.4236/jpee.2017.54004 1,784 Downloads 4,438 Views Citations

<...242526 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies