Department of Mechanical Engineering, University of Ibadan, P.M.B 1, Ibadan, Nigeria - Articles

Mathematical Model for Optimizing Charge and Heel Levels in Steel Remelting Induction Furnace for Foundry Shop (Articles)

O.K. Abubakre, R.A. Muriana

J. of Minerals and Materials Characterization and Eng. Vol.8 No.6，June 20, 2009

DOI: 10.4236/jmmce.2009.86037 6,877 Downloads 9,160 Views Citations
A Mathematical Model of an Evaporative Cooling Pad Using Sintered Nigerian Clay (Articles)

Chukwuneke Jeremiah Lekwuwa, Ajike Chinagorom Ogbu, Achebe Chinonso Hubert, Okolie Paul Chukwulozie

J. of Minerals and Materials Characterization and Eng. Vol.11 No.11，November 30, 2012

DOI: 10.4236/jmmce.2012.1111119 6,098 Downloads 8,816 Views Citations
Evaluation of the Influence of Fossil Fuel on Corrosion Resistance of Brass (Articles)

Olayide Rasaq Adetunji, Peter Olaitan Aiyedun, Sidikat Ibiyemi Kuye, Dauda Adewale Lateef

J. of Minerals and Materials Characterization and Eng. Vol.2 No.3，April 30, 2014

DOI: 10.4236/jmmce.2014.23022 3,275 Downloads 4,517 Views Citations
Effects of Pressure on the Mechanical Properties and Microstructure of Die Cast Aluminum A380 Alloy (Articles)

Kenneth N. Obiekea, Shekarau Y. Aku, Danjuma S. Yawas

J. of Minerals and Materials Characterization and Eng. Vol.2 No.3，May 28, 2014

DOI: 10.4236/jmmce.2014.23029 5,660 Downloads 9,224 Views Citations
Performance of Tannin/Glycerol-Chromate Hybrid Conversion Coating on Aluminium (Articles)

Makanjuola Oki

Journal of Materials Science and Chemical Engineering Vol.3 No.7，June 11, 2015

DOI: 10.4236/msce.2015.37001 3,043 Downloads 4,142 Views Citations
Effect of Velocity of Impact on Mechanical Properties and Microstructure of Medium Carbon Steel during Quenching Operations (Articles)

Joseph Babalola Agboola, Oladiran Abubakre Kamardeen, Edeki Mudiare, Michael Bolaji Adeyemi

Engineering Vol.7 No.7，July 17, 2015

DOI: 10.4236/eng.2015.77039 2,819 Downloads 4,043 Views Citations
Comparative Analysis of the Effects of Pressure on the Mechanical Properties and Microstructure of Die Cast Aluminum Alloys (Articles)

Kenneth N. Obiekea, Shekarau Y. Aku, Danjuma S. Yawas

J. of Minerals and Materials Characterization and Eng. Vol.4 No.6，November 21, 2016

DOI: 10.4236/jmmce.2016.46029 1,703 Downloads 3,386 Views Citations
Evaluation of Mechanical and Microstructural Properties of α-Brass Alloy Produced from Scrap Copper and Zinc Metal through Sand Casting Process (Articles)

Edward E. Igelegbai, Oluwaseun A. Alo, Adefemi O. Adeodu, Ilesanmi A. Daniyan

J. of Minerals and Materials Characterization and Eng. Vol.5 No.1，December 20, 2016

DOI: 10.4236/jmmce.2017.51002 4,038 Downloads 9,986 Views Citations
Effects of Processing Methods on Mechanical Properties of Alkali Treated Bagasse Fibre Reinforced Epoxy Composite (Articles)

Geoffrey Bem Nyior, Ekene Chukwuka Mgbeahuru

J. of Minerals and Materials Characterization and Eng. Vol.6 No.3，May 11, 2018

DOI: 10.4236/jmmce.2018.63024 1,055 Downloads 2,600 Views Citations
Development and Quality Analysis of a Direct Solar Dryer for Fish (Articles)

Surajudeen Olanrewaju Obayopo, Oluwasanmi Iyiola Alonge

Food and Nutrition Sciences Vol.9 No.5，May 17, 2018

DOI: 10.4236/fns.2018.95037 1,741 Downloads 8,195 Views Citations
Development and Optimisation of Drying Parameters for Low-Cost Hybrid Solar Dryer Using Response Surface Method (Articles)

Adeodu O. Adefemi, Daniyan A. Ilesanmi

Journal of Sustainable Bioenergy Systems Vol.8 No.2，June 19, 2018

DOI: 10.4236/jsbs.2018.82002 1,377 Downloads 4,048 Views Citations
Thermodynamic and Environmental Assessment of Gas Flaring in the Niger Delta Region of Nigeria (Articles)

Richard V. James, Howells I. Hart, Barinyima Nkoi

Journal of Power and Energy Engineering Vol.6 No.12，December 28, 2018

DOI: 10.4236/jpee.2018.612003 809 Downloads 2,470 Views Citations
Performance Evaluation and Economic Analysis of a Domestic Solar Cooker (Articles)

Augustine U. Iwuoha, Briggs M. Ogunedo

Open Access Library Journal Vol.8 No.3，March 30, 2021

DOI: 10.4236/oalib.1107263 474 Downloads 2,142 Views Citations
Evaluating the Structural Integrity of Fibreglass for the Manufacture of Headgears (Articles)

Olusegun A. Adefuye, Nurudeen A. Raji, Rafiu O. Kuku, Timothy Oyetade, Ridwan O. Ola-Gbadamosi

Modern Mechanical Engineering Vol.11 No.2，May 26, 2021

DOI: 10.4236/mme.2021.112002 318 Downloads 1,608 Views Citations
Effect of Palm Oil Biodiesel Blends on Engine Emission and Performance Characteristics in an Internal Combustion Engine (Articles)

Alpha Chukwumela Ajie, Mohammed Moore Ojapah, Endurance Ogheneruona Diemuodeke

Open Journal of Energy Efficiency Vol.12 No.1，March 31, 2023

DOI: 10.4236/ojee.2023.121002 422 Downloads 2,244 Views Citations
Review of Disruptive Technology in Automotive Manufactruring (Articles)

Patrick Osakuade, Ojapah Mohammed Moore

Technology and Investment Vol.14 No.3，June 27, 2023

DOI: 10.4236/ti.2023.143008 234 Downloads 1,063 Views Citations
Physical and Chemical Properties of Horns Sheaths Particles for the Manufacture of Composite Materials (Articles)

Tawe Laynde, Zakari Yaou, Karga Tapsia Lionel, Konai Noel, Danwe Raidandi

Journal of Materials Science and Chemical Engineering Vol.12 No.5，May 10, 2024

DOI: 10.4236/msce.2024.125001 134 Downloads 723 Views Citations
Assessing Urban Land Use Change in New Braunfels, Texas from 2013 to 2020 (Articles)

M. K. Lasode, I. C. Esobi, C. I. Anyanwu, D. O. Lasode

Journal of Geoscience and Environment Protection Vol.8 No.12，December 28, 2020

DOI: 10.4236/gep.2020.812014 553 Downloads 1,478 Views Citations
Simulation of Torque during Rod Rolling of HC SS316 at Low Strain Rate Using “Phantom-Roll” Method (Articles)

P. O. Aiyedun, O. S. Igbudu, B.O. Bolaji

J. of Minerals and Materials Characterization and Eng. Vol.10 No.15，December 20, 2011

DOI: 10.4236/jmmce.2011.1015114 5,924 Downloads 7,847 Views Citations
Characterization of Phosphide Platelets in Eutectic Sand Cast Cu-Sn-P Alloy (Articles)

L. O. Mudashiru, T. M. Azeez, S. O. Afolabi, I. A. Babatunde

International Journal of Nonferrous Metallurgy Vol.4 No.3，July 2, 2015

DOI: 10.4236/ijnm.2015.43004 3,437 Downloads 4,373 Views Citations

<...242526 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies