Stirred Mill - Articles - Scientific Research Publishing

Morphology Study of Particle Breakage Mechanisms in a Horizontal Stirred Mill: Automated and Manual Point Counting Approaches (Articles)

Reem Roufail, Bern Klein

J. of Minerals and Materials Characterization and Eng. Vol.9 No.5，September 30, 2021

DOI: 10.4236/jmmce.2021.95035 309 Downloads 1,390 Views Citations
CFD Prediction of the Turbulent Flow Generated in Stirred Square Tank by a Rushton Turbine (Articles)

W. Chtourou, M. Ammar, Z. Driss, M. S. Abid

Energy and Power Engineering Vol.6 No.5，May 22, 2014

DOI: 10.4236/epe.2014.65010 5,760 Downloads 8,876 Views Citations
Effect of Butternut Squash (Cucurbita moschata) Seed Powder on the Chemical and Rheological Properties of Stirred Cultured Camel Milk and Yoghurt (Articles)

Collins K. Kangogo, Patrick S. Muliro, Joseph O. Anyango

Food and Nutrition Sciences Vol.15 No.7，July 23, 2024

DOI: 10.4236/fns.2024.157038 112 Downloads 688 Views Citations
Windmills in The Netherlands (Articles)

Teun Koetsier

Advances in Historical Studies Vol.14 No.1，February 11, 2025

DOI: 10.4236/ahs.2025.141002 40 Downloads 265 Views Citations
This article belongs to the Special Issue on ‘Findings in the History of Machines and Mechanisms’ from 8th IFToMM Symposium on International Symposium on History of Machines and Mechanisms In Ankara, Turkey, April 18-20, 2024
A Fuzzy Logic Model to Predict the Bioleaching Efficiency of Copper Concentrates in Stirred Tank Reactors (Articles)

Ali Ahmadi, Mohammad Raouf Hosseini

International Journal of Nonferrous Metallurgy Vol.4 No.1，January 15, 2015

DOI: 10.4236/ijnm.2015.41001 5,539 Downloads 6,875 Views Citations
Chemical, Nutritional, Rheological, and Organoleptical Characterizations of Stirred Pumpkin-Yoghurt (Articles)

Hassan Barakat, Mohamed F. Y. Hassan

Food and Nutrition Sciences Vol.8 No.7，July 25, 2017

DOI: 10.4236/fns.2017.87053 2,445 Downloads 5,191 Views Citations
This article belongs to the Special Issue on Fruit Nutrition and Health
A Comparative Technique for Performance Evaluation of Hammer Mill and Disk Mill in Yam Flour Processing (Articles)

Joseph B. Bassey, Isaac F. Odesola, Joshua A. Olawuyi

World Journal of Engineering and Technology Vol.10 No.3，August 18, 2022

DOI: 10.4236/wjet.2022.103040 342 Downloads 1,906 Views Citations
Characterization of a 5 Litre Continuous Stirred Tank Reactor (Articles)

Philomena K. Igbokwe, Joseph T. Nwabanne, Samuel Wadzani Gadzama

World Journal of Engineering and Technology Vol.3 No.2，April 7, 2015

DOI: 10.4236/wjet.2015.32003 5,152 Downloads 8,015 Views Citations
Impact of Inulin Extracted, Purified from (Chicory and Globe Artichoke) Roots and the Combination with Maltodextrin as Prebiotic Dietary Fiber on the Functional Properties of Stirred Bio-Yogurt (Articles)

Wedad M. El-Kholy, Gehan H. Bisar, Reda A. Aamer

Food and Nutrition Sciences Vol.14 No.2，February 17, 2023

DOI: 10.4236/fns.2023.142006 354 Downloads 1,875 Views Citations
Production of Iron from Mill Scale Industrial Waste via Hydrogen (Articles)

N. M. Gaballah, A. F. Zikry, M. G. Khalifa, A. B. Farag, N. A. El-Hussiny, M. E. H. Shalabi

Open Journal of Inorganic Non-metallic Materials Vol.3 No.3，July 15, 2013

DOI: 10.4236/ojinm.2013.33005 8,923 Downloads 18,672 Views Citations
Macro and Micro Nutrient Supply to Soil and Plants from Sugar Mill Mud (Articles)

Ishrat Jahan Sanchary, Kazi Md. Jahangir Kabir, Shah Muhammad Imamul Huq

Agricultural Sciences Vol.10 No.2，February 26, 2019

DOI: 10.4236/as.2019.102014 1,053 Downloads 2,746 Views Citations
Silk Mills in the Early Modern Italy (Articles)

Stefano Comino, Alessandro Gasparetto

Advances in Historical Studies Vol.9 No.5，December 8, 2020

DOI: 10.4236/ahs.2020.95022 651 Downloads 4,287 Views Citations
This article belongs to the Special Issue on ‘Findings on history of Italian mechanical Engineering’ from IFIT 2020, the Third International Conference of IFToMM ITALY
Isolation of Bacteria with Purifying Potential and Application in the Treatment of Effluents from an Artisanal Palm Oil Mill in the Littoral Region of Cameroon (Articles)

Djien Nyami Félicité, Noubou Takam Daïna, Fobasso Tagnikeu Roméo, Tcheugoue Styve Joël, Njicoumbe Fatima, Ndzobo Ndzana Joël, Kuessie Yanick, Bella Josiane, Foncha Felix, Emmanuel Mpondo Mpondo, Véronique Penlap Beng, Tavea Fréderic Marie

Journal of Environmental Protection Vol.12 No.7，July 9, 2021

DOI: 10.4236/jep.2021.127029 347 Downloads 1,428 Views Citations
Recent Technological Innovation for the New Generation of CRIST Sensors—A Practical Approach in China’s Largest Underground Nonferrous Mine (Articles)

Xiaoqiang Guan, Haibin Li, Zhiyong Tan, Xubin Wu, Wei Zhang

Open Journal of Applied Sciences Vol.13 No.8，August 25, 2023

DOI: 10.4236/ojapps.2023.138107 108 Downloads 594 Views Citations
Modelling of the High-Energy Ball Milling Process (Articles)

Mohsen Mhadhbi

Advances in Materials Physics and Chemistry Vol.11 No.1，January 29, 2021

DOI: 10.4236/ampc.2021.111004 2,707 Downloads 7,031 Views Citations
Removal of Organic Matter from Paper Mill Effluent by Electrochemical Oxidation (Articles)

Teresa Zayas, Mario Picazo, Leonardo Salgado

Journal of Water Resource and Protection Vol.3 No.1，January 29, 2011

DOI: 10.4236/jwarp.2011.31004 8,446 Downloads 15,550 Views Citations
Assessment of microbial pools by an innovative microbiological technique during the co-composting of olive mill by-products (Articles)

Teresa Casacchia, Pietro Toscano, Adriano Sofo, Enzo Perri

Agricultural Sciences Vol.2 No.2，May 20, 2011

DOI: 10.4236/as.2011.22015 5,966 Downloads 10,694 Views Citations
Development of Roller Ends Forced-Contact Model and Cambering Technology for UCM Temper Mill (I)——Development of Roller Ends Forced-Contact Model and the Computational Model of Flatness for UCM temper mill (Articles)

Zhenhua Bai, Hongxin Si, Xiaodong Shi, Linfang Han, Ruibing Long, Shoumin Wu, Xiujun Li, Dongdong Zhang

Engineering Vol.3 No.7，July 20, 2011

DOI: 10.4236/eng.2011.37088 4,628 Downloads 7,443 Views Citations
Development of Roller Ends Forced-Contact Model and Cambering Technology for UCM Temper Mill (II)——Development of cambering technology for UCM temper mill (Articles)

Zhenhua Bai, Xiaodong Shi, Hongxin Si, Linfang Han, Ruibing Long, Shoumin Wu, Xiujun Li, Dongdong Zhang

Engineering Vol.3 No.7，July 22, 2011

DOI: 10.4236/eng.2011.37089 4,451 Downloads 7,340 Views Citations
A Study on Zeolite Performance in Waste Treating Ponds for Treatment of Palm Oil Mill Effluent (Articles)

M. Halim Shah Ismail, Shazryenna Dalang, Syafiie Syam, Shamsul Izhar

Journal of Water Resource and Protection Vol.5 No.7A，July 18, 2013

DOI: 10.4236/jwarp.2013.57A004 5,973 Downloads 9,346 Views Citations
This article belongs to the Special Issue on Wastewater Treatment and Prevention Engineering

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies