S. V. Alekseenko, A. V. Bobylev, A. R. Evseev, V. M. Karsten, D. M. Markovich and B. V. Tarasov, “Measurements of the Liquid-Film Thickness by Fiber-Optic Probe,” Instrument and Experimental Techniques, Vol. 46, No. 2, 2003, pp. 260-264. doi:10.1023/A:1023650623759

has been cited by the following article:

• TITLE: Measurement of Film Thickness on a Curved Surface by Fiber Optic Probe

  AUTHORS: C. Buffone, A. Glushchuk, C. S. Iorio, F. Dubois

  KEYWORDS: Fiber Optic; “Finger” Surface; Condensation

  JOURNAL NAME: Journal of Electronics Cooling and Thermal Control, Vol.3 No.1, March 29, 2013

  ABSTRACT: A fiber optic sensor is developed in order to measure film thickness along a curved surface. The technique is non-invasive, which has large bandwidth and good spatial resolution (150 μm and 300 μm). A “finger” type surface is used on top of which liquid is poured down in a continuing manner. Film thickness is measured with the fiber optic probe on 2 different locations along the “finger” surface. Film thickness of 163 and 79 μm was measured near the top and in the middle of the fin surface.