Wang, Y., Tang, B., Gao, Y., Wu, X., Chen, J., Shan, L., et al. (2021) Epoxy Composites with High Thermal Conductivity by Constructing Three-Dimensional Carbon Fiber/Carbon/Nickel Networks Using an Electroplating Method. ACS Omega, 6, 19238-19251.
https://doi.org/10.1021/acsomega.1c02694

has been cited by the following article:

• TITLE: Enhancing Thermo-Mechanical Properties of Epoxy Nanocomposites with Dispersed MWCNTs Using a Novel Hybrid Mixing Technique

  AUTHORS: Akhilesh Singh, Somveer Singh, Anurag Mishra, Ashutosh Singh, Abhishek Singh, Anil Kumar Soni

  KEYWORDS: MWCNTs, Epoxy Resin and Nanocomposites

  JOURNAL NAME: Open Journal of Applied Sciences, Vol.15 No.7, July 21, 2025

  ABSTRACT: This study presents an innovative approach to enhance the thermo-mechanical properties of multi-walled carbon nanotube (MWCNT) reinforced epoxy nanocomposites through a dual-action dispersion method. By simultaneously applying ultrasonic energy and shear force via an axial-flow impeller, a uniform distribution of MWCNTs within the epoxy matrix was achieved without the need for chemical modification. The impact of MWCNT loading (0.25 - 1.0 wt%) on the thermal and mechanical behavior of the composites was systematically investigated. Dynamic mechanical analysis revealed a significant improvement in storage modulus, with a maximum enhancement observed at 0.75 wt% MWCNT content. Thermogravimetric analysis demonstrated increased thermal stability, confirming the efficiency of nanotube reinforcement. Scanning electron microscopy of fracture surfaces validated the homogeneity of nanotube distribution and provided insights into fracture mechanics. These findings suggest that the adopted hybrid dispersion technique is effective for fabricating high-performance polymer nanocomposites for structural applications.