Saji, V.S., Choi, I.-H. and Lee, C.-W. (2011) Progress in Electrodeposited Absorber Layer for CuIn(1-x)GaxSe1 (CIGS) Solar Cells. Solar Energy, 85, 2666-2678.
https://doi.org/10.1016/j.egypro.2010.07.009

has been cited by the following article:

• TITLE: Simulation of a CIGS Solar Cell with CIGSe2/MoSe2/Mo Rear Contact Using AFORS-HET Digital Simulation Software

  AUTHORS: Donafologo Soro, Adama Sylla, N’Guessan Armel Ignace, Aboudoulaye Toure, Amal Bouich, Siaka Toure, Bernabé Marí

  KEYWORDS: CIGS, Molybdenum Diselenide (MoSe2), AFORS-HET, Simulation, Efficiency

  JOURNAL NAME: Modeling and Numerical Simulation of Material Science, Vol.12 No.2, March 15, 2022

  ABSTRACT: In this work, the AFORS-HET digital simulation software was used to calculate the electrical characteristics of the cell/n-ZnO/i-ZnO/n-Zn (O, S)/p-CIGSe2/p + -MoSe2/Mo/SLG. When the thickness of the CIGSe2 absorber is between 3.5 and 1.5 μm, the efficiency of the cell with an interfacial layer of MoSe2 remains almost constant, with an efficiency of about 24.6%, higher to that of a conventional cell which is 23.4% for a thickness of 1.5 μm of CIGSe2. To achieve the expected results, the MoSe2 layer must be very thin less than or equal to 30 nm. In addition, a Schottky barrier height greater than 0.45 eV severely affects the fill factor and the open circuit voltage of the solar cell with MoSe2 interface layer.