Proudhon, H., Li, J., Wang, F., Roos, A., Chiaruttini, V. and Forest, S. (2016) 3D Simulation of Short Fatigue Crack Propagation by Finite Element Crystal Plasticity and Remeshing. International Journal of Fatigue, 82, 238-246.
https://doi.org/10.1016/j.ijfatigue.2015.05.022

has been cited by the following article:

• TITLE: On the Relation of Grain Orientation and Opening Crack of an Al-Cu-Mg Sheet

  AUTHORS: Cai Hu

  KEYWORDS: Al-Cu-Mg Sheet, Tearing Crack, Grain Orientation, Plane, Crack Propagation

  JOURNAL NAME: Engineering, Vol.9 No.5, May 31, 2017

  ABSTRACT: In this paper, the orientation of grains which adjacent to a developed opening crack was investigated by EBSD. A definition of θ has been came up with which represents the angle between the principal stress plane and each plane of the grains. Smaller θ means easier to crack. It gave a good explanation of the crack propagation throughout the grains. It also revealed that propagation path is along with the plane. This finding will give a prediction of tear properties and help us understanding the cracking mechanism and the behavior of tearing.