Scientific Research An Academic Publisher
OPEN ACCESS
Add your e-mail address to receive free newsletters from SCIRP.
Select Journal AA AAD AAR AASoci AAST ABB ABC ABCR ACES ACS ACT AD ADR AE AER AHS AID AiM AIT AJAC AJC AJCC AJCM AJIBM AJMB AJOR AJPS ALAMT ALC ALS AM AMI AMPC ANP APD APE APM ARS ARSci AS ASM BLR CC CE CellBio ChnStd CM CMB CN CRCM CS CSTA CUS CWEEE Detection EMAE ENG EPE ETSN FMAR FNS GEP GIS GM Graphene GSC Health IB ICA IIM IJAA IJAMSC IJCCE IJCM IJCNS IJG IJIDS IJIS IJMNTA IJMPCERO IJNM IJOC IJOHNS InfraMatics JACEN JAMP JASMI JBBS JBCPR JBiSE JBM JBNB JBPC JCC JCDSA JCPT JCT JDAIP JDM JEAS JECTC JEMAA JEP JFCMV JFRM JGIS JHEPGC JHRSS JIBTVA JILSA JIS JMF JMGBND JMMCE JMP JPEE JQIS JSBS JSEA JSEMAT JSIP JSS JSSM JST JTR JTST JTTs JWARP LCE MC ME MI MME MNSMS MPS MR MRC MRI MSA MSCE NJGC NM NR NS OALib OALibJ ODEM OJA OJAB OJAcct OJAnes OJAP OJApo OJAppS OJAPr OJAS OJBD OJBIPHY OJBM OJC OJCB OJCD OJCE OJCM OJD OJDer OJDM OJE OJEE OJEM OJEMD OJEpi OJER OJF OJFD OJG OJGas OJGen OJI OJIC OJIM OJINM OJL OJM OJMC OJMetal OJMH OJMI OJMIP OJML OJMM OJMN OJMP OJMS OJMSi OJN OJNeph OJO OJOG OJOGas OJOp OJOph OJOPM OJOTS OJPathology OJPC OJPChem OJPed OJPM OJPP OJPS OJPsych OJRA OJRad OJRD OJRM OJS OJSS OJSST OJST OJSTA OJTR OJTS OJU OJVM OPJ POS PP PST PSYCH SAR SCD SGRE SM SN SNL Soft SS TEL TI UOAJ VP WET WJA WJCD WJCMP WJCS WJET WJM WJNS WJNSE WJNST WJV WSN YM
More>>
A. Skolyszewski, J. Luksza and M. Packo, “Some Problems of Multi-Stage Fine Wire Drawing of High-Alloy Steels and Special Alloys,” Journal of Material Processing Technology, Vol. 60, 1996, pp. 155-160.
has been cited by the following article:
TITLE: Optimization of the Annealing Parameters for Improved Tensile Properties in Cold Drawn 0.12 wt% C Steel
AUTHORS: Nurudeen A. Raji, Oluleke O. Oluwole
KEYWORDS: Annealing; Steel; Cold Drawn; Soaking Time; Strength; Optimization
JOURNAL NAME: Engineering, Vol.5 No.11, November 6, 2013
ABSTRACT: Drawn low carbon steel is characterized by brittle fracture. These defects are associated with the poor ductility and high strain hardening due to the cold work. There is a need therefore to determine optimum heat treatment parameters that could ensure improved toughness and ductility. Determining the optimum annealing parameters ensures valued recrystallization and also minimizes grain growth that could be detrimental to the resulting product. 40% and 55% cold drawn steels were annealed at temperatures 500℃ to 650℃ at intervals of 50℃ and soaked for 10 to 60 minutes at interval of 10 minutes to identify the temperature range and soaking time where optimum combination of properties could be obtained. Tensile test and impact toughness experiments were done to determine the required properties of the steel. Polynomial regression analysis was used to fit the properties relationship with soaking time and temperatures and the classical optimization technique was used to determine the minimum soaking time and temperature required for improved properties of the steel. Annealing treatment at 588℃ for 11 minutes at grain size of 44.7 mm can be considered to be the optimum annealing treatment for the 40% cold drawn 0.12 wt% C steel and 539℃ for 17 minutes at grain size of 19.5 mm for the 55% cold drawn 0.12 wt% C steel.
Related Articles:
Erratum to “Multilevel B-Spline Repulsive Energy in Nanomodeling of Graphenes” [Journal of Surface Engineered Materials and Advanced Technology Vol. 4 No. 2 (April 2014) 75-86]
Maharavo Randrianarivony
DOI: 10.4236/jsemat.2015.52009 3,501 Downloads 4,261 Views Citations
Pub. Date: March 24, 2015
Cutting and Welding of High-Strength Steels Using Non-Vacuum Electron Beam as a Universal Tool for Material Processing
Thomas Hassel, Nils Murray, Georgii Klimov, Alexander Beniyash
DOI: 10.4236/wjet.2016.44056 1,529 Downloads 2,267 Views Citations
Pub. Date: November 22, 2016
A Study of Processing Parameters on the Carburization of C2R Steels
P.O. Atanda, O.E. Olorunniwo, L.E. Umoru, A.D. Adeyeye
DOI: 10.4236/jmmce.2009.82008 5,149 Downloads 6,244 Views Citations
Pub. Date: February 20, 2009
Electrical Behaviour and Spherulites Morphology of HDPE/PP Polyblends with HDPE as Base Material
Prakash Chandra Sahoo, Rabiranjan Murmu, Sarat Chandra Patra, Chiranjit Dutta, Harekrushna Sutar
DOI: 10.4236/msa.2018.910060 522 Downloads 967 Views Citations
Pub. Date: September 21, 2018
Comment on the Paper “Condom-Assisted Transurethral Resection: A New Surgical Technique for Urethral Tumor”, Surgical Science, Vol. 1, 2010, pp. 46-48
Guven Aslan
DOI: 10.4236/ss.2011.24042 4,535 Downloads 7,500 Views Citations
Pub. Date: June 23, 2011
