N. Hutnik, K. Piotrowski, A. Kozik and A. Matynia, “Continuous Reaction Crystallization of Struvite from phosphate(V) Solutions Containing Inorganic Impurities –SIG kinetic Approach,” Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering SSCHE, Tatranské Matliare, 23-27 May 2011, pp. 325-0333.

has been cited by the following article:

• TITLE: Precipitation and Crystallization of Struvite from Synthetic Wastewater under Stoichiometric Conditions

  AUTHORS: Anna Kozik, Nina Hutnik, Krzysztof Piotrowski, Agata Mazienczuk, Andrzej Matynia

  KEYWORDS: Struvite; Precipitation; Continuous Reaction Crystallization; Phosphate(V) Ions; Impurity Ions; Continuous DT MSMPR Crystallizer; Crystal Size Distribution; Kinetics

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.3 No.4B, October 25, 2013

  ABSTRACT: Phosphate (V) ions were continuously removed from synthetic wastewater containing inorganic impurities using magnesium and ammonium ions. The product was magnesium ammonium phosphate (V) hexahydrate, struvite, MgNH4PO4 × 6H2O. Research ran in stoichiometric conditions in DT MSMPR type crystallizer with internal circulation of suspension. Increase in process environment pH from 9 to 11 resulted in 3-time decrease of mean struvite crystals size (from 40.1 to12.6mm). Elongation of mean residence time of suspension in a crystallizer up to 3600 s resulted in improvement of the product quality. Mean size of struvite crystals enlarged up to50.2mm. Based on kinetic calculations results (SIG MSMPR model) it was concluded, that linear struvite crystal growth rate varied within 5.04 × 10–9 – 1.69 × 10–8 m/s range, whereas nucleation rate within 1.4 × 107 – 1.7 × 1010 1/(s m3) limits. In solid product, besides struvite, also all impurities present in wastewater were identified analytically as hydroxides, phosphates and other salts.