T. R. Albrecht, P. Gruetter, P.D. Horne and D. J. Rugar, “Frequency Modulation Detection Using High-Q Cantilevers for Enhanced Force Microscope Sensitivity,” Journal of Applied Physics, Vol. 69, No. 2, 1991, pp. 668-673. doi:10.1063/1.347347

has been cited by the following article:

• TITLE: Self-Sensing and –Actuating Probes for Tapping Mode AFM Measurements of Soft Polymers at a Wide Range of Temperatures

  AUTHORS: Nadejda B. Matsko, Julian Wagner, Anton Efimov, Ines Haynl, Stefan Mitsche, Wolfgang Czapek, Boris Matsko, Werner Grogger, Ferdinand Hofer

  KEYWORDS: Tuning Fork, Sharp Tungsten Tip, AFM, Tapping Mode, Soft Materials

  JOURNAL NAME: Journal of Modern Physics, Vol.2 No.2, March 22, 2011

  ABSTRACT: Self-sensing and –actuating probes optimized for conventional tapping mode atomic force microscopy (AFM) are described. 32-kHz quartz tuning forks with a chemically etched and focus ion beam (FIB) sharpened (curvature radii are 5-10 nm) tungsten tip are stable at air and liquid nitrogen atmosphere and at a wide range of temperatures. If driven at constant frequency, the scan speed of such sensors can be up to 3 Hz. AFM was performed on polymer samples in order to study the stability and applicability of these sensor for investigation of soft materials with high dynamical tendencies.