TITLE:
Fabrication of Congo Red/Oxidized Porous Silicon (CR/OPS) pH-Sensors
AUTHORS:
Abdel-Hady Kashyout, Hesham M. A. Soliman, Marwa Nabil, Ahmed A. Bishara
KEYWORDS:
Nano Porous Silicon; Anisotropic Etching Process; Alkali Etching; Congo Red; PH Sensor
JOURNAL NAME:
Materials Sciences and Applications,
Vol.4 No.8A,
August
28,
2013
ABSTRACT:
The fabrication of nano porous silicon, nPSi, using alkali etching process has been studied and carried out. The surface chemistry of anisotropic etching of n-type Si-wafer is reviewed and the anisotropic chemical etching of silicon in alkaline solution using wetting agents is discussed. Transformation of crystallographic plane of n-Si (211) to nPSi (100) has occurred on using n-propanol as wetting agent. The rate of pore formation was 0.02478 - 0.02827 μm/min, which was heavily dependent upon the concentration of the etchant containing wetting agents, allowing patterned porous silicon formation through selective doping of the substrate. A particle size of 15 nm for porous nano-silicon was calculated from the XRD data. Porosity of PS layers is about 10%. Pore diameter and porous layer thickness are 0.0614 nm and 16 μm, respectively. The energy gap of the produced porous silicon is 3.3 eV. Furthermore, the combination of PS with Congo Red, which are nanostructured due to their deposition within the porous matrix is discussed. Such nano compounds offer broad avenue of new and interesting properties depending on the involved materials as well as on their morphology. Chemical route was utilized as the host material to achieve pores filling. They were impregnated with Congo Red, which gave good results for the porous silicon as a promising pH sensor.