P. Srivastava, B. Singh and M. J. Angove, “Competitive Adsorption of C(II) onto Kaolinite as Affected by pH,” 3rd Australian New Zealand Soils Conference, Sydney, 5-9 December 2004, pp. 5-9.

has been cited by the following article:

• TITLE: Remediation of Heavy Metal (Cd, Cr, Cu, Co, and Ni) Ions from Kaolinite Clay Using Molecular Micelles Chelators and D-Optimum Experimental Design

  AUTHORS: Sayo O. Fakayode, Ashley M. Taylor, Maya McCoy, Sri Lanka Owen, Whitney E. Stapleton, Carmen Grady, David A. Pollard

  KEYWORDS: Heavy Metal Ion Remediation; Molecular Micelles Chelator; D-Optimum Experimental Design; Kaolinite Clay

  JOURNAL NAME: Journal of Environmental Protection, Vol.4 No.8, August 5, 2013

  ABSTRACT: This study investigated the potential utility of poly (sodium N-undecanoyl-L-leucyl-valinate) (poly-L-SULV), poly (sodium N-undecanoyl-L-leucyl-alanate) (poly-L-SULA), and poly (sodium N-undecanoyl-glycinate) (poly-SUG) molecular micelles (MMs) as chelators for heavy metal (Cd, Cr, Cu, Co, and Ni) ion remediation of kaolinite clay using D-optimum experimental design. D-optimum experimental design was employed to simultaneously investigate the influence of design variables such as the buffer pH, chelator concentration, and centrifuge speed to evaluate the optimum conditions and to reduce the time and cost of metal ion remediation. The partition coefficients of the metal ion concentrations between the kaolinite clay and chelator equilibrium were also evaluated. In addition, the influence of metal ion concentrations on the remediation capability of the chelators was evaluated by conducting remediation studies at four different (10 ppm, 40 ppm, 60 ppm, and 80 ppm) metal ion concentrations. In general, the results of the remediation efficiency and partition coefficients obtained in this study are highly metal ion dependent and also dependent upon the chelator used for the remediation. Specifically, the remediation efficiency of the molecular micelles was found to be comparable to or better than the corresponding remediation efficiency obtained when SDS or EDTA was used for the remediation. However, at optimum conditions, poly-SULV and poly-L-SULA molecular micelle chelators demonstrated superior remediation efficiencies for Cr, with remediation efficiency of 99.9 ± 8.7% and 99.1 ± 0.7%, respectively.