H. Y. Wu and F. Z. Lin, “Mechanical Properties and Strain-Hardening Behavior of Mg Alloy AZ31B-H24 Thin Sheet,” Materials Science and Engineering: A, Vol. 527, No. 4-5, 2010, pp. 1194-1199. doi:10.1016/j.msea.2009.09.049

has been cited by the following article:

• TITLE: Microstructures, Textures and Mechanical Properties Evolution during Cold Drawing of Pure Mg

  AUTHORS: Yandang Qiao, Xin Wang, Zuyan Liu, Erde Wang

  KEYWORDS: Cold Drawing; Magnesium Alloys; Dynamic Recrystallization; TEM

  JOURNAL NAME: Microscopy Research, Vol.1 No.2, July 23, 2013

  ABSTRACT: Pure Mg wires with a maximum cumulative area reduction of 98% were obtained by successful cold drawing. Mechanical properties, microstructures and texture evolution of the as-drawn wires were investigated by tensile tests, transmission electron microscopy (TEM) and electron backscattering diffraction (EBSD). Depended on the mechanical properties and microstructure evolution, continuous dynamic recrystallization (DRX) had taken place during the cold drawing process. DRX during cold deformation has not been reported in other literatures before.