C. Xin and E.-S. Sinencio, “A Linearization Technique for RF Lownoise Amplifier,” Proceedings of the 2004 International Symposium on Circuits and Systems, Vancouver, 23-26 May 2004, p. IV-313-16.

has been cited by the following article:

• TITLE: A CMOS 3.1 - 10.6 GHz UWB LNA Employing Modified Derivative Superposition Method

  AUTHORS: Amir Homaee

  KEYWORDS: Broadband; Low-Noise Amplifier (LNA); Noise Figure; Ultra-Wideband (UWB); Modified Derivative Su-perposition Method

  JOURNAL NAME: Circuits and Systems, Vol.4 No.3, July 5, 2013

  ABSTRACT: Low noise amplifier (LNA) performs as the initial amplification block in the receive path in a radio frequency (RF) receiver. In this work an ultra-wideband 3.1 10.6-GHz LNA is discussed. By using the proposed circuits for RF CMOS LNA and design methodology, the noise from the device is decreased across the ultra wide band (UWB) band. The measured noise figure is 2.66 3 dB over 3.1 10.6-GHz, while the power gain is 14 ± 0.8 dB. It consumes 23.7 mW from a 1.8 V supply. The input and output return losses (S11 & S22) are less than –11 dB over the UWB band. By using the modified derivative superposition method, the third-order intercept point IIP3 is improved noticeably. The complete circuit is based on the 0.18 μm standard RFCMOS technology and simulated with Hspice simulator.