H. J. Li, W. G. Lu, J. J. Li, X. D. Bai and C. Z. Gu “Measurements of the Current through a Single Multiwalled Carbon Nanotube Demonstrate a High Conduction Capacity, Which Would Be Important if Such Tubes Were Used in Integrated Circuits,” Applied Physics Letters, Vol. 95, No. 8, 2005, Article ID: 086601. doi:10.1103/PhysRevLett.95.086601

has been cited by the following article:

• TITLE: Electrically-Conductive Composite Nanomaterial with Multi-Walled Carbon Nanotubes

  AUTHORS: Levan Ichkitidze, Vitally Podgaetsky, Sergei Selishchev, Eugenie Blagov, Vyacheslav Galperin, Yuri Shaman, Alexander Pavlov, Eugenie Kitsyuk

  KEYWORDS: Multiwalled Carbon Nanotubes; Electroconductive Nanomaterial; Substrates; Carboxymethyl Cellulose; Electroconductive Gel; Electroconductive Layers

  JOURNAL NAME: Materials Sciences and Applications, Vol.4 No.5A, May 21, 2013

  ABSTRACT: Specific conductivity of the composite nanomaterial layers with micron and submicron dimensions, consisting of carboxymethyl cellulose (CMC) and multiwalled carbon nanotubes (MWCNT) was investigated. Ultradispersed aqueous suspension was deposited on soft (aluminum foil, plates made from polyester and polyimide, cotton fabric, office paper) and solid (coverslip, silicon wafers with silicon oxide layer) substrates by silk-screen printing. Electrical resistance was measured by four-probe method and by the method of square on surface from which the conductivity and conductivity per square of surface were calculated taking into account layer’s geometric dimensions. Specific conductivity of the layers with thickness range 0.5 - 5 μm was ~1.2×104÷4×104 S/m, and max conductivity per square was ~ 0.2 S. Investigated nanomaterial is attractive to electronic and biomedical applications.