G. E. Archie, “The Electrical Resistivity Log as an Aid in Determining Some Reservoir Characteristics,” Transactions of the American Institute of Mining and Metallurgical Engineers, Vol. 146, No. 1, 1942, pp. 56-62.

has been cited by the following article:

• TITLE: Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Surface Resistivity Measurements: A Case History from Parts of Enugu Town (Nigeria)

  AUTHORS: Ahamefula U. Utom, Benard I. Odoh, Anthony U. Okoro

  KEYWORDS: Resistivity; Transmissivity; Dar Zarrouk Parameters; Longitudinal Conductance; Pumping Tests

  JOURNAL NAME: Journal of Water Resource and Protection, Vol.4 No.12, December 13, 2012

  ABSTRACT: Many investigation techniques are commonly employed with the aim of estimating the spatial distribution of transmissivity. Unfortunately, the conventional methods for the determination of hydraulic parameters such as pumping tests, permeameter measurements and grain size analysis are invasive and relatively expensive. A geoelectric investigation involving vertical electrical sounding was carried in parts of Enugu town, Enugu state, Nigeria. The survey was aimed at extrapolating the result of pumping tests over an area. Using the Dar Zarrouk parameter, a β constant of 0.32 was found to translate resistivity to transmissivity with clay content as the primary factor controlling the hydraulic conductivity. Results of the study show a strong correlation between aquifer transmissivity and longitudinal conductance (R2 = 0.82). Estimation of aquifer transmissivity values based on the results of the resistivity measurements also made it possible to demarcate area with good groundwater potential in parts of Enugu town, Nigeria.