M. Tobajas, M. Siegel and S. A. Apitz, “Influence of geometry and solid concentration on the hydrodynamics and mass transfer of a rectangular airlift reactor for marine sediment and soil bioremediation,” Chemical Engineering Journal, Vol. 77, 1999, pp. 660-669.

has been cited by the following article:

• TITLE: CFD Simulation of Scale Influence on the Hydrodynamics of an Internal Loop Airlift Reactor

  AUTHORS: Reza Davarnejad, Ehsan Bagheripoor, Abolfazl Sahraei

  KEYWORDS: Internal Loop Airlift Reactor; Gas Hold-Up, CFD

  JOURNAL NAME: Engineering, Vol.4 No.10, October 10, 2012

  ABSTRACT: In this work, the overall gas hold-up in the riser and down-comer of three internal airlift reactors with a working volume of 10.5, 32 and 200 l at the range of temperatures 18℃ - 21℃, under atmospheric pressure was simulated using Com-putational Fluid Dynamics (CFD). The range of superficial gas velocity was 0.5 - 3 cm/s. The three reactors geometrically were similar to each other. CFD simulation and experimental data showed that the gas hold-up in the riser and down-comer increased by increasing the reactor scale. It was concluded that the simulated data were in good agreement with the experimental ones obtained from the literature.