H. W. Chang, “Correlation of Wear with Oxidation of Carbon-Carbon Composites,” Wear, Vol. 80, No. 9-10, 2009, pp. 7-14. doi:10.1016/0043-1648(82)90083-7

has been cited by the following article:

• TITLE: Multiple Response Optimization of Three-Body Abrasive Wear Behaviour of Graphite Filled Carbon-Epoxy ComPosites Using Grey-Based Taguchi Approach

  AUTHORS: K.M. Subbaya, N. Rajendra, Y.S. Varadarajan, B. Suresha

  KEYWORDS: Composites; Three-Body Abrasion; Grey Relational Analysis; Scanning Electron Microscope

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, September 25, 2012

  ABSTRACT: The three-body abrasive wear behaviour of carbon fabric reinforced epoxy (C-E) composites has been evaluated by the addition of graphite (G) particles as a secondary reinforcement. Three-body abrasive wear test were conducted using dry sand rubber wheel abrasion tester as per ASTM G-65 with three process parameters load, abrading distance and filler content. To assess the abrasive wear behaviour of particulate filled C-E composites satisfying multiple performance measure, grey-based Taguchi approach has been adopted. The experiments were designed according to Taguchi’s orthogonal array (L?27). The grey relational analysis was applied to convert a multi response process optimization to a single response. Using analysis of variance, significant contributions of process parameters have been determined. The results indicate that the addition of graphite particles into C-E composite increased the wear resistance considerably. It was observed that highest wear resistance of C-E composite was achieved with incorporation of 10 wt. % of graphite filler. Results indicate that the filler content and grit size of abrasive paper were found to be the most significant factor which has influence on the abrasive wear of C-E composite. The worn surface features were examined through scanning electron microscope to probe the wear mechanism.