J. H. Lee, S. H. Park and M. Y. Huh, “Modification of the Recrystallization Texture by Means of Cross Rolling in Ferritic Stainless Steel Sheets,” Materials Science Forum, Vol. 449-452, 2004, pp. 1-6. doi:10.4028/www.scientific.net/MSF.449-452.1

has been cited by the following article:

• TITLE: Equal-Channel Angular Pressing as a New Processing to Control the Microstructure and Texture of Metallic Sheets

  AUTHORS: Tong Xiao, Hiroyuki Miyamoto, Toshiyuki Uenoya

  KEYWORDS: Severe Plastic Deformation; Equal-Channel Angular Pressing (ECAP); Recrystallisation; Texture; Ferritic Stainless Steel; Strain Path

  JOURNAL NAME: Materials Sciences and Applications, Vol.3 No.9, September 26, 2012

  ABSTRACT: The extended band structures of as-cold-rolled high Cr steel sheets are recrystallisation-resistant, and tend to become aggregates of the so-called grain colonies as a partially recovered state after final annealing. Such band structures diminish formability and become origin of the so-called ridging. A novel processing will be shown here, which involves strain-path change by introducing one-pass ECAP prior to cold-rolling, and facilitates recrystallisation. Indeed, the recrystallisation temperature was reduced by 100℃, compared with cold-rolling alone imposing an equivalent strain. Grain- scale microshear bands introduced during one-pass ECAP perturbed the banded structures in post-ECAP cold-rolling and enhanced the recrystallisation at the final annealing.