Scientific Research An Academic Publisher
OPEN ACCESS
Add your e-mail address to receive free newsletters from SCIRP.
Select Journal AA AAD AAR AASoci AAST ABB ABC ABCR ACES ACS ACT AD ADR AE AER AHS AID AiM AIT AJAC AJC AJCC AJCM AJIBM AJMB AJOR AJPS ALAMT ALC ALS AM AMI AMPC ANP APD APE APM ARS ARSci AS ASM BLR CC CE CellBio ChnStd CM CMB CN CRCM CS CSTA CUS CWEEE Detection EMAE ENG EPE ETSN FMAR FNS GEP GIS GM Graphene GSC Health IB ICA IIM IJAA IJAMSC IJCCE IJCM IJCNS IJG IJIDS IJIS IJMNTA IJMPCERO IJNM IJOC IJOHNS InfraMatics JACEN JAMP JASMI JBBS JBCPR JBiSE JBM JBNB JBPC JCC JCDSA JCPT JCT JDAIP JDM JEAS JECTC JEMAA JEP JFCMV JFRM JGIS JHEPGC JHRSS JIBTVA JILSA JIS JMF JMGBND JMMCE JMP JPEE JQIS JSBS JSEA JSEMAT JSIP JSS JSSM JST JTR JTST JTTs JWARP LCE MC ME MI MME MNSMS MPS MR MRC MRI MSA MSCE NJGC NM NR NS OALib OALibJ ODEM OJA OJAB OJAcct OJAnes OJAP OJApo OJAppS OJAPr OJAS OJBD OJBIPHY OJBM OJC OJCB OJCD OJCE OJCM OJD OJDer OJDM OJE OJEE OJEM OJEMD OJEpi OJER OJF OJFD OJG OJGas OJGen OJI OJIC OJIM OJINM OJL OJM OJMC OJMetal OJMH OJMI OJMIP OJML OJMM OJMN OJMP OJMS OJMSi OJN OJNeph OJO OJOG OJOGas OJOp OJOph OJOPM OJOTS OJPathology OJPC OJPChem OJPed OJPM OJPP OJPS OJPsych OJRA OJRad OJRD OJRM OJS OJSS OJSST OJST OJSTA OJTR OJTS OJU OJVM OPJ POS PP PST PSYCH SAR SCD SGRE SM SN SNL Soft SS TEL TI UOAJ VP WET WJA WJCD WJCMP WJCS WJET WJM WJNS WJNSE WJNST WJV WSN YM
More>>
O. M. Engler, Y. Huh and C. N. Tome, “Crystal-Plasticity Analysis of Ridging in Ferritic Stainless Steel Sheets,” Metallurgical Materials Transactions, Vol. 36A, No.11, 2005, pp. 3127-3139. doi:10.1007/s11661-005-0084-5
has been cited by the following article:
TITLE: Equal-Channel Angular Pressing as a New Processing to Control the Microstructure and Texture of Metallic Sheets
AUTHORS: Tong Xiao, Hiroyuki Miyamoto, Toshiyuki Uenoya
KEYWORDS: Severe Plastic Deformation; Equal-Channel Angular Pressing (ECAP); Recrystallisation; Texture; Ferritic Stainless Steel; Strain Path
JOURNAL NAME: Materials Sciences and Applications, Vol.3 No.9, September 26, 2012
ABSTRACT: The extended band structures of as-cold-rolled high Cr steel sheets are recrystallisation-resistant, and tend to become aggregates of the so-called grain colonies as a partially recovered state after final annealing. Such band structures diminish formability and become origin of the so-called ridging. A novel processing will be shown here, which involves strain-path change by introducing one-pass ECAP prior to cold-rolling, and facilitates recrystallisation. Indeed, the recrystallisation temperature was reduced by 100℃, compared with cold-rolling alone imposing an equivalent strain. Grain- scale microshear bands introduced during one-pass ECAP perturbed the banded structures in post-ECAP cold-rolling and enhanced the recrystallisation at the final annealing.
Related Articles:
Influence of Hot Band Annealing and Cold Rolling on Texture and Ridging of 430 Stainless Steel Containing Aluminum
Sudipta Patra, Lokesh Kumar Singhal
DOI: 10.4236/msa.2013.41009 5,944 Downloads 7,868 Views Citations
Pub. Date: January 24, 2013
Phase Relations in Si-Al-Y-O-C Systems
Kan Wu, Laner Wu, Zhenkun Huang, Yong Jiang, Yun Ma
DOI: 10.4236/msce.2015.37011 3,639 Downloads 4,284 Views Citations
Pub. Date: July 1, 2015
Stainless-Steel Thin Film as Passive Radiative Cooling Materials
Mourad Benlattar, El Mostafa Oualim, M’hammed Mazroui, Azeddine Mouhsen, Mohmmed Harmouchi
DOI: 10.4236/opj.2016.68021 1,579 Downloads 2,305 Views Citations
Pub. Date: August 22, 2016
High Temperature Oxidation and Hot Corrosion Behaviour of 9Cr 1Mo Ferritic Cold Rolled Steel in Air at 900°C under Cyclic Condition
Amarish K. Shukla, Dinesh Gond, M. Bharadwaj, D. Puri
DOI: 10.4236/jmmce.2011.1011081 5,031 Downloads 6,691 Views Citations
Pub. Date: September 12, 2011
Analysis of Super Duplex Stainless Steel Properties as an Austenite-Ferrite Composite
Fady M. Elsabbagh, Ahmed El-Sabbagh, Rawia M. Hamouda, Mohamed A. Taha
DOI: 10.4236/msa.2015.612111 4,729 Downloads 6,117 Views Citations
Pub. Date: December 21, 2015
