K. Shirvani, M. Saremi, A. Nishikata and T. Tsuru, (2003) “Electrochemical study on hot corrosion of Si-modified aluminide coated In-738LC in Na₂SO₄-20 wt.% NaCl melt at 750 °C”, Corros. Sci. Corrosion Science, Volume 45, Issue 5, p 1011-1021

has been cited by the following article:

• TITLE: High Temperature Cyclic Oxidation Behavior of Ni and Co Based Superalloys

  AUTHORS: Deepa Mudgal, Surendra Singh, Satya Prakash

  KEYWORDS: Cyclic oxidation, SEM, EDAX

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, March 20, 2012

  ABSTRACT: High temperature oxidation causes degradation of materials in aircraft, marine, industrial and land base gas turbines. To obviate this problem, oxidation behavior of Ni and Co based superalloys viz superni 600 and superco 605 (Midhani grade) has been studied in air at 900oC. Both superalloys go through cyclic oxidation which consists of 1 hr heating in silicon carbide tube furnace followed by 20 min cooling in ambient air. Weight change was taken by a digital electronic weighing balance having accuracy of 1 mg after each cycle. Exposed alloys were characterized by XRD, FESEM and EDS. Result shows that the Co base superalloy superco 605 shows less weight gain as compare to superni 600. The oxide layer mainly contains oxides of Cr2O3, NiO and spinel NiCr2O4.