A. Gugliuzza and E. Drioli, “Evaluation of CO2 Per- meation through Functional Assembled Mono-Layers: Relationships between Structure and Transport,” Polymer, Vol. 46, No. 23, 2005, pp. 9994-10003. doi:10.1016/j.polymer.2005.08.011

has been cited by the following article:

• TITLE: PEBAXTM-Silanized Al2O3Composite. Synthesis and Characterization

  AUTHORS: José Cirilo Ignacio Lara-Estévez, Luís Antônio Sanchez de Almeida Prado, Karl Schulte, Emilio Bucio

  KEYWORDS: Nanocomposites; Alumina; Functionalization; Thermoplastic Elastomers; Thermal Behavior

  JOURNAL NAME: Open Journal of Polymer Chemistry, Vol.2 No.2, May 30, 2012

  ABSTRACT: Alumina nanoparticles were dispersed in poly(amide 12-b-tetramethylene oxide) copolymer through extrusion. The alumina particles were functionalized with 3-(2 trimethoxysilylethyl) cyclohexene oxide. The following PEBAX TM/ Al2O 3 proportions were prepared: 0.1, 1.0, 5.0, and 10.0% w/w. The thermal stabiity of the nanocomposites was evalu- ated by thermograviemtric analysis under N2 and was comparable to the neat PEBAXTM polymer. The thermo-oxidative degradation of the polymeric matrix by oxygen was strongly hindered by the functionalized alumina. The rule of mixture would predict that the thermal degradation should be strongly dominated by PEBAXTM matrix. Therefore, the physical mixture of PEBAXTM and silanized alumina should be almost as stable as pure PEBAXTM. However, the experimental results suggest that the nanocomposites are more stable than the mixture of their components. This stabilization effect is evident in the temperature range between 300?C and 400?C, in which the degradation of the PA12 block takes place.