Ban, I., Stergar, J., Drofenik, M., Ferk, G. and Makove, D. (2011) Synthesis of Copper-Nickel Nanoparticles Prepared by Mechanical Milling for Use in Magnetic Hyperthermia. Journal of Magnetism and Magnetic Materials, 323, 2254-2258.
https://doi.org/10.1016/j.jmmm.2011.04.004

has been cited by the following article:

• TITLE: Structural, Magnetic and Heating Efficiency of Ball Milled γ-Fe2O3/Gd2O3 Nanocomposite for Magnetic Hyperthermia

  AUTHORS: Abdelaziz Sabik

  KEYWORDS: Magnetic Hyperthermia, Iron Oxides Nanoparticles, Maghemite, Ball Milling, XRD, VSM

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.14 No.1, January 26, 2024

  ABSTRACT: The preparation of γ-Fe2O3/Gd2O3 nanocomposite for possible use in magnetic hyperthermia application was done by ball milling technique. The nanocomposite was characterized by X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). The heating efficiency and the effect of milling time (5 h and 30 h) on the structural and magnetic properties of the nanocomposite were reported. XRD analysis confirms the formation of the nanocomposite, while magnetization measurements show that the milled sample present hysteresis with low coercivity and remanence. The specific absorption rate (SAR) under an alternating magnetic field is investigated as a function of the milling time. A mean heating efficiency of 68 W/g and 28.7 W/g are obtained for 5 h and 30 h milling times respectively at 332 kHz and 170 Oe. The results showed that the obtained nanocomposite for 5 h milling time is a promising candidate for magnetic hyperthermia due to his properties which show an interesting magnetic behavior and high specific absorption rate.