Yu, H., Jou, L.-J., Ouyang, H.-T., et al. (2006) Similitude Criteria for a Two-Dimensional Wall Jet in an Isothermal Mechanically Ventilated Enclosure. Biosystems Engineering, 93, 415-425.
https://doi.org/10.1016/j.biosystemseng.2006.01.001

has been cited by the following article:

• TITLE: Experimental Study of the Diffusion of a Confined Wall Jet through a Perforated Plate: Influence of the Porosity and the Geometry

  AUTHORS: Moussa Diop, Denis Flick, Graciela Alvarez, Jean Moureh

  KEYWORDS: Porous Medium, Perforated Plate, Wall Jet, Air Ventilation, Aeraulic, Turbulence Diffusion

  JOURNAL NAME: Open Journal of Fluid Dynamics, Vol.12 No.1, March 25, 2022

  ABSTRACT: This paper investigated lateral diffusion of a confined two-dimensional wall jet (air inlet height: 5 cm) through a perforated plate. We considered two plates with porosities ofand . The plates were positioned at distances of 10 cm and 20 cm below the jet inlet. The experiments were realized using 2D Laser Doppler Anemometer (LDA). Different profiles of mean and fluctuating velocities are presented. The presence of a perforated plate strongly modified the airflow pattern compared to an empty enclosure. The velocities above and below the plate depend on several parameters, including the porosity and the plate’s position relative to the inlet slot and the longitudinal position. The difference between the flow velocity above and below the plates could not be related using a universal formula that depends on these parameters. We also investigated the influence of a porous media of a height of 20 cm (a stack of spheres having a diameter of 3.75 cm) located below the perforated plate. The results highlight that the porous medium strengthens the effects of the perforated plate on the flow.