Eskitascioglu, G., Usumez, A., Sevimay, M., Soykan, E. and Unsal, E. (2004) The Influence of Occlusal Loading Location on Stresses Transferred to Implant-Supported Prostheses and Supporting Bone: A Three-Dimensional Finite Element Study. The Journal of Prosthetic Dentistry, 91, 144-150.
https://doi.org/10.1016/j.prosdent.2003.10.018

has been cited by the following article:

• TITLE: A Study of the Mechanical Characteristics of a Mandibular Parasymphyseal Fracture with Internal Fixation Device Subject to Variable Bite Forces: Finite Element Analysis

  AUTHORS: Victor Caraveo, Scott Lovald, Tariq Khraishi

  KEYWORDS: Mandible, Mandibular Fracture, Internal Fixation, Finite-Element Modeling, Bite Forces

  JOURNAL NAME: Journal of Biosciences and Medicines, Vol.9 No.4, April 26, 2021

  ABSTRACT: In recent times, research into mandibular fracture has gained momentum from advances in scanning techniques, software/algorithm developments and improvements, and numerical structural modeling using the finite-element method (FEM). In this work, the FEM is used to model a mandibular fracture (using an inhomogeneous and orthotropic jaw model) simulating the effect of different bite tasks/forces on the stability of the fixated fracture. Specifically, bilateral and unilateral clenches (using muscle data) were studied using a low-profile 3D 4 × 2 hole mini-plate deployed for fracture fixation. Here, the mandible bone was treated as orthotropic and spatially inhomogeneous. Although the results of stress and displacement analyses, for this fixation hardware, indicate sufficient fixation under normal biting conditions, the results show that the unilateral and ipsilateral bites develop, in general, the highest stresses or displacements. Such results can guide post-surgery recommendation on bite behavior.