TITLE:
Use of Alternative Binder: Influence of Latex Content on Physical and Mechanical Properties of Laterite Stabilized with Raw Rubber Latex
AUTHORS:
Koffi Clément Kouadio, Owochi Quentin Aristide Offo, Conand Honoré Kouakou, Edjikémé Emeruwa
KEYWORDS:
Laterite, Raw Rubber Latex, Sample, Stabilization, Characterization
JOURNAL NAME:
Geomaterials,
Vol.10 No.3,
April
26,
2020
ABSTRACT: Raw rubber Latex contents, from 0% to 30% were used to stabilize lateritic samples to provide an alternative to cement stabilization. These samples were submitted to physical tests (water resistance test, absorption test) and mechanical tests (dry compressive strength test). The results indicate that samples made of latex content less than 15% dissolve completely into water. So it was impossible to make sample with these contents. Samples with 15% of raw rubber content or more are steady after water resistance test. The absorption rate of these samples decreases as the latex content increases. It goes from 14.45% for the samples at 15% to 5.87% for those at 30%. Therefore, the compressive strength test indicates that the resistance increases from 0.37 MPa for samples without latex to 3.15 MPa for those at 30% of latex content. Also, the rheological study shows that the samples pass from a brittle behaviour to a plastic behaviour when the latex content increases. The behaviour of the sample according to these different tests shows that this material can be used in several activity areas, such as construction, road building and sports area.