Takanashi, S. and Abe, Y. (2017) Improvement of the Electrochemical Performance of an NCA Positive-Electrode Material of Lithium Ion Battery by Forming an Al-Rich Surface Layer. Ceramics International, 43, 9246-9252. https://doi.org/10.1016/j.ceramint.2017.04.080

has been cited by the following article:

• TITLE: Preparation of Micron Co3O4 by Liquid-Phase Precipitation

  AUTHORS: Yi Peng

  KEYWORDS: Micron, Co3O4, Particle Size Control, Liquid Phase Precipitation

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.7 No.12, December 20, 2019

  ABSTRACT: Co3O4 powder has a wide range of applications in the fields of catalysts, magnetic materials and electrochemistry. Especially after the 1990s, the demand for lithium ion battery industry has grown tremendously. The traditional wet preparation of Co3O4 powder cannot meet the requirements of the battery industry. Exploring suitable methods and theories for controlling particle size and morphology is of great significance for the preparation of battery-grade Co3O4 powder. CoCl2 was used as the cobalt source, NH4HCO3 was used as the precipitant, and the precursor was prepared and further calcined to obtain Co3O4 powder. The results show that the molar ratio is the main factor affecting the precursor phase in the preparation of Co3O4 in CoCl2-NH4HCO3 system. The suitable process conditions for the system are a molar ratio of NH4HCO3 to CoCl2 of 4.5:1, a concentration of CoCl2 of 13 g/L, a reaction temperature of 60°C, and a reaction time of 10 hours. The median diameter of Co3O4 prepared by the reaction conditions is about 9 μm.