Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.


Contact Us >>

WhatsApp  +86 18163351462(WhatsApp)
Paper Publishing WeChat
Book Publishing WeChat
(or Email:book@scirp.org)

Article citations


Tarak, M., Nidhi, K., Ritesh, M. and Kamal, K.P. (2016) Catalytic Steam Reforming of Model Oxygenates of Bio-Oil for Hydrogen Production Over La Modified Ni/CeO2-ZrO2 Catalyst. Topics in Catalysis, 59, 1343-1353.

has been cited by the following article:

  • TITLE: La2O3/Fe2O3-CeO2 Composite Oxide Catalyst and Its Performance

    AUTHORS: Youfeng Li, Jinliang Lin, Guangwei Wang

    KEYWORDS: La2O3/Fe2O3-CeO2, Composite Oxide, Synthetic Method, Catalytic Degradation, Wastewater Treatment

    JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.9 No.12, December 11, 2019

    ABSTRACT: The La2O3/Fe2O3-CeO2 composite oxide catalysts were prepared by coprecipitation method, sol-gel method and hydrothermal method. The effect of preparation methods on structure morphology and photocatalytic properties of La2O3/Fe2O3-CeO2 samples was investigated. The results show that the cubic CeO2 structure can be obtained at 600℃. The rod-shaped sample prepared by coprecipitation method, displays the highest crystalline and the strongest diffraction peak intensity. The spherical sample is acquired from sol-gel method, while the small granular sample prepared by hydrothermal method tends to aggregate. The maximum specific surface area of the sample prepared by coprecipitation method is 76.21 m2/g, the minimum specific area of the sample from sol-gel method is 32.66 m2/g and the maximum pore size is 13.84 nm, while the minimum pore volume and pore size of the sample by hydrothermal method are 0.038 cm3/g and 3.95 nm respectively. The band gap energy of catalyst samples is in the following order: sample-CP (c0/ct) = kt + qe. The maximum k-value of the sample degradation process obtained by coprecipitation method is 0.074 min-1.