Ikram Malek, M. and Saini, S. (2015) Improved Two Stage Ultra-Wideband CMOS Low Noise Amplifier without Band Rejection Using Low Noise Active Inductor. International Conference on Signal Processing and Communication Engineering Systems, Guntur, 2-3 January 2015, 117-120.
https://doi.org/10.1109/SPACES.2015.7058237

has been cited by the following article:

• TITLE: A 9 - 10.6 GHz Microstrip Antenna—UWB Low Noise Amplifier with Differential Noise Canceling Technique for IoT Applications

  AUTHORS: Dalia Elsheakh, Heba Shawkey, Sherif Saleh

  KEYWORDS: Ultra-Wideband (UWB), Low Noise Amplifier (LNA), Differential Noise Canceling, Low Power, Low Noise Figure

  JOURNAL NAME: International Journal of Communications, Network and System Sciences, Vol.12 No.11, November 30, 2019

  ABSTRACT: An ultra-wide band (UWB) receiver front-end that operates at the UWB frequency range, starting from 9 GHz - 10.6 GHz is proposed in this paper. The proposed system consists of an off-chip microstrip antenna and CMOS differential low noise amplifier with a differential noise canceling (DNC) technique. The proposed antenna is trapezoidal dipole shaped with balun and printed on a low-cost FR4 substrate with dimensions 10 × 10 × 0.8 mm3. The balun circuit integrated with the ground antenna to improve the antenna impedance matching. Noise canceling is obtained by using a differential block with each stage having 2 amplifiers that generate differential signals, subtracted to improve total noise performance. The proposed DNC block improves NF by 50% while increasing total power consumption with only 0.1 Mw. The differential CMOS cascode LNA with DNC block is implemented using UMC 0.13 μm CMOS process, exhibits a flat gain of 19 dB, maximum noise figure of 2.75 dB, 1 dB compression point −16 dBm and 3rd order intercept point (IIP3) −10 dBm. The proposed system has total DC power consumption of 2.8 mW at 1.2 V power supply.